Bill's Home Tech
Starlink — help from Bill

Starlink Manual for Beginners & Seniors

What are you trying to do?

Type it in plain words — like "check for obstructions" or "internet stopped working."

Quick guides for one question
This manual covers Starlink from start to finish. These short guides each answer one question.
Keep it handy
Reading is free, with no sign-up. If you'd like, we can email you the link.
Bill's Home Tech · All manuals · (330) 200-8042 · Serving Portage County, Ohio
Prefer paper? Print this guide
All topics
Getting Started

A Note from Bill

Hello, and welcome. Maybe you live where the cable company never ran a line, and your choices have been slow DSL or a phone hotspot. Maybe a neighbor put a white dish on a pole and says it changed everything. Or maybe your family is urging you to order Starlink and you'd like to understand it first. Whichever it is, this guide is for you.

I'm Bill. Helping folks feel at home with their technology is what I do every day, and I wrote this guide the way I'd explain it sitting beside you at your kitchen table: slowly, in plain English, with nothing taken for granted. If I use a word you don't know, I'll stop and explain it.

The one thing to remember

If you take only one idea from this whole guide, make it this: Starlink needs a clear view of the sky. Trees, roofs and chimneys between the dish and the sky cause short dropouts. Choose the spot carefully, using the free check in the Starlink app, and almost everything else takes care of itself.

Why it helps
What this guide does for you
You'll know whether Starlink is a good fit for your property before you spend money, which plan is enough, how to find and mount the best spot, how to use the app, what snow does, and how to cancel and return the kit within the 30-day window if it isn't for you.

The big promise

You can't harm anything by checking the app, running a speed test or restarting the router. The two places to be careful are ladders and roofs, which deserve a helper, and deadlines: the 30-day return window matters. I'll flag both clearly.

And I'm a phone call away

If you're ever unsure, call me at (330) 200-8042. Now, let's get you comfortable.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Ways Starlink Can Make Life Easier

Once the dish is up and online, a few settings and accessories make Starlink fit your life better. These three take a few minutes to learn. Menu names can shift a little between app versions, so look for the words in bold.

1. Pre-heat before a big snow — stay online through the storm

Why it helps
Why this helps
When the forecast calls for heavy, wet snow, switching snow melt to Pre-heat keeps the dish warm before the first flakes land, so snow has less chance to build up. You stay connected for the weather reports and the family check-in calls.
  1. Open the Starlink app and go to Settings.
  2. Find the snow melt setting.
  3. Choose Pre-heat while the storm passes.
  4. When the storm is over, switch back to Automatic, which Starlink recommends for everyday use.
Tip
Good to know
No extra charge, but Pre-heat can use more electricity than Automatic. Even with heating, snow that completely buries the dish can interrupt service, so a mounting spot where snow won't pile up still matters most.

Checked against Starlink's Help Center article "How do I adjust snow melt mode?" on November 13, 2026.

2. Starlink Mini on a power bank — internet during a power outage

Why it helps
Why this helps
The Starlink Mini can run from a large USB-C power bank. During a power outage, or at a camp with no outlets, that can keep a phone and tablet online for calls and news.
  1. Check that your power bank supports USB-C Power Delivery at 100 watts (20 volts, 5 amps). It's printed on the bank or in its manual.
  2. Connect the Mini to the power bank with a USB-C cable rated for 100 watts.
  3. Set the Mini where it has a clear view of the sky.
  4. Wait for it to come online, then join its built-in Wi-Fi as usual.
Tip
Good to know
Requires a Mini and a power bank you buy separately. Supplies under 100 watts, including common 65-watt laptop chargers, won't run it. The Mini typically draws about 20 to 40 watts, so a bank's watt-hour rating tells you roughly how long it will last.

Checked against Starlink's Help Center articles on Starlink Mini power sources on November 13, 2026.

3. Choose your update time — no reboots during the late show

Why it helps
Why this helps
Starlink normally restarts around 3 a.m. to install updates. If you're a night owl, an early riser, or someone in the house works odd hours, you can move that short restart to a time nobody is online.
  1. Open the Starlink app and go to Settings.
  2. Tap Software Updates.
  3. Pick the window that suits your household, such as morning or afternoon.
  4. Save. Updates will now restart the dish during that window.
Tip
Good to know
Free. The restart takes only a few minutes. If the app says an update is waiting and you want it now, a manual reboot from the app applies it right away.
From Bill
Want help setting these up?
I'm happy to walk through the app settings with you, check that a power bank will run your Mini, and help you plan for storms and outages. $49 remote · $99 in your home.

Checked against Starlink's Help Center article "What are the alerts on my Starlink App?" on November 13, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

What Starlink Is

Older satellite internet used one big satellite parked very far above the earth. Signals had a long way to travel, so video calls felt laggy. Starlink uses many smaller satellites flying much closer to the earth. Each one passes overhead quickly, and your dish hands off from one to the next all day long.

How it works, in plain terms

  1. A flat dish (Starlink calls it simply your Starlink) sits outside with a view of the sky.
  2. The dish talks to whichever satellites are passing overhead.
  3. A cable carries the connection to a router inside your home.
  4. The router makes Wi-Fi for your tablet, computer, TV and smart speakers.

What makes it different

FeatureWhat it means for you
Works almost anywhereNo cable in the ground needed, which is why it suits rural homes.
Needs open skyTrees and buildings in the way cause brief interruptions.
You install itStarlink ships a kit; you or a helper set it up.
Needs powerThe dish and router run on household power. No power, no internet.
Monthly planNo annual contract on current Residential plans; prices vary by address.
Good to know
Who runs Starlink
Starlink is run by SpaceX. You order, pay and get support directly through starlink.com and the Starlink app, or buy the hardware from an established store.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Is Starlink Right for Your Home?

Starlink shines where other options are poor. Where good cable or fiber already reaches your door, those are often cheaper and steadier. Here's an honest way to decide.

When Starlink is often the best choice

  • Cable and fiber don't reach your road, and DSL is painfully slow.
  • Your cell signal is too weak for 5G home internet.
  • You have an open yard or roof with a clear view of the sky.
  • You want video calls, streaming and web browsing that simply work.

When something else may suit you better

  • Fiber or good cable is available at a similar or lower price.
  • Your home sits deep in tall trees with no clear spot to mount the dish.
  • Strong 5G home internet from T-Mobile or Verizon is offered at your address. See Bill's T-Mobile & Verizon 5G Home Internet manual.
  • You can't easily mount a dish, and no helper is available.
Tip
Compare honestly
Bill's Choosing an Internet Plan & Reading the Bill manual helps you line up every option at your address, with the total monthly cost of each.
Good to know
Portage County's back roads
Coverage from cable and fiber can change from one road to the next. Check each provider's address tool for your exact address before deciding.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

The Words You'll See

A short glossary. Come back to it whenever the app or the bill uses a word that puzzles you.

WordWhat it means
Starlink (the dish)Starlink calls the dish itself "your Starlink." Some people call it "Dishy."
KitEverything in the box: dish, router, cables and power supply.
Standard kitThe common home kit, with a kickstand and a separate router.
Starlink MiniA small, portable dish with Wi-Fi built in.
Router 3The Wi-Fi router that comes with current Standard kits.
ObstructionAnything blocking the dish's view of the sky, such as a tree or chimney.
Field of viewThe patch of sky the dish needs to see clearly.
Service addressThe address your Residential plan is registered to.
Residential planStarlink's home plans, used at your service address.
Roam planPlans for using Starlink while traveling or at different places.
StowFolding the dish flat so it can be moved or packed.
Snow meltA setting that lets the dish warm itself to clear snow.
Support ticketA written help request sent through the app or website.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Plans, Prices & Ordering

The Residential Plans

Most homes use a Residential plan. In January 2026 Starlink renamed its home plans by speed. All include unlimited data. Starlink now shows your exact price after you enter your address, and prices differ by region.

PlanAbout per monthSpeedGood for
Residential 100 Mbps$55Up to 100 Mbps1 to 3 people with basic needs. Select areas only.
Residential 200 Mbps$85Up to 200 MbpsBusier homes. Select areas; may slow at peak hours.
Residential Max$130Often 400+ MbpsHighest network priority, best at busy times.

Checked against Starlink's Help Center article "What are the Residential plans?" and Starlink's plans page on November 13, 2026.

Good to know
"Residential Lite" is gone
If a family member mentions Residential Lite, that plan was renamed. The middle plan today is Residential 200 Mbps.

How to choose

  • For email, web browsing, video calls and one or two shows streaming at once, Residential 100 Mbps is usually plenty, where it's offered.
  • If several people stream in the evening or someone works from home, consider the next step up.
  • Choose Max if busy-hour performance is important to you and the price makes sense.
Watch out
Prices change
Starlink raised most plan prices in June 2026, and prices vary by address. Treat the numbers above as a guide and confirm the price on the order screen before you pay.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Plans, Prices & Ordering

Roam Plans for Travel

A Residential plan is meant for your registered service address and doesn't support roaming. If you want Starlink at a camp, in an RV, or at more than one place, that's what Roam plans are for.

What to know about Roam

  • Roam plans come in sizes with a monthly data allowance and an unlimited option.
  • Starlink replaced the old Roam 50GB plan with Roam 100GB in early 2026.
  • In late 2026 the smallest Roam plan cost about $55 a month and the unlimited plan well over $150. Check the current price at starlink.com.
  • Using Starlink while actually moving, such as in a moving vehicle, needs the right Roam plan.

Checked against Starlink's Help Center article "How do I change my service address?" on November 13, 2026.

Tip
The Mini and Roam go together
Many travelers pair a Roam plan with the small Starlink Mini, which has Wi-Fi built in. See Starlink Mini.
Watch out
Don't just take the home dish on vacation
Using a Residential plan away from your service address can be restricted. If you travel regularly, ask Starlink about Roam before you go.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Plans, Prices & Ordering

The Hardware: Buying, Renting and Where to Get It

You'll need a Starlink kit: either the Standard kit for a home, or the Starlink Mini. How you pay for it has changed several times, and offers vary by address.

Ways you may be offered the hardware

  • Buy it outright at checkout.
  • Rent it with a monthly kit fee added to your bill, in some areas. Rental kits must be returned in good condition within 30 days of canceling, or you're charged the full kit price.
  • Buy from a retailer. Hardware returns then go through that retailer.

Checked against Starlink's Help Center article "How do I return my Starlink kit?" on November 13, 2026.

Tip
Look at the order screen
Starlink's website shows the hardware price and any rental or promotional offer after you enter your address. Write down exactly what you're agreeing to, including the monthly kit fee if you rent.
Scam alert
Buy only from places you trust
Order at starlink.com (typed in yourself) or from an established store. Fake websites copy Starlink's look and offer impossible discounts. See Fake Starlink Deals and Scams.
Watch out
Second-hand kits
A used kit from a stranger may still be tied to someone else's account, or rented. If you're offered one, ask Starlink support how transfers work before you pay anything.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Plans, Prices & Ordering

Check Your Sky Before You Order

The Starlink app has a free tool that uses your phone's camera to scan the sky from where the dish would go. You can use it before you buy anything. If your property is heavily wooded, this step can save you money and trouble.

  1. Install the Starlink app from your phone's official app store, published by Starlink (SpaceX).
  2. Open it and tap Find an Install Location, or look for Check for Obstructions.
  3. Choose your hardware model when asked, such as Standard or Mini.
  4. Go to the place you'd mount the dish, at the height you'd mount it. For a roof, stand at a window or deck as close to that height as you safely can.
  5. Hold the phone up and follow the on-screen arrows to sweep the sky.
  6. Read the result: No Obstructions, or Obstructions with the blocked areas shown.
  7. Repeat at every spot you're considering.

Checked against Starlink's Help Center articles on checking for obstructions on November 13, 2026.

Tip
Higher usually wins
If the yard is blocked by trees, a spot higher up, such as a roof peak or a tall pole, often sees much more sky.
Watch out
Never stand on a roof to scan
Don't climb onto a roof or a ladder alone to run the scan. Use an upstairs window or ask a helper.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Plans, Prices & Ordering

The 30-Day Return Window

Starlink gives you 30 days to decide whether the hardware works for you. It isn't a free trial of the service: you pay as normal, and if you're unhappy within the window, you can return the hardware for a refund.

The key points

  • Return the kit within the 30-day window for a full hardware refund. After that, there's no refund for the hardware.
  • To start, cancel your service in your account and tick the box for a hardware return. Starlink emails a prepaid return label.
  • If you don't see the return option, your kit isn't eligible for a return.
  • If you bought the kit from a store, the store handles the hardware return. Cancel the service with Starlink yourself.

Checked against Starlink's Help Center article "How do I return my Starlink kit?" on November 13, 2026.

Tip
Set up right away
Install and test the kit in its real spot as soon as it arrives, so you have as many days as possible to judge it, including a rainy day and a busy evening.
Watch out
Write the date down
Note the delivery date and the last return date on your calendar. Cancellation steps are in Canceling and Returning the Kit.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

What's in the Box: the Standard Kit

The Standard kit is the usual choice for a home. Here's what current kits contain, according to Starlink's specification sheets.

ItemWhat it does
The Starlink (dish)A flat, rectangular dish that aims itself at the sky.
KickstandA stand for setting the dish on the ground or a flat surface.
Router 3The indoor Wi-Fi router, with two Ethernet (LAN) ports for wired devices.
Starlink cableAbout 15 meters (roughly 50 feet), from the dish to the router.
Power supply and cablesPlug into a regular household outlet.

Checked against Starlink's Standard kit and Router 3 specification sheets on November 13, 2026.

Watch out
Don't cut or splice the cable
Starlink advises against splicing or extending its cable with other cables. If you need a longer run, ask Starlink about its own longer cable.
Tip
Keep the box
Hold on to the box and packing until the 30-day return window has passed.
Good to know
The router is for indoors
Router 3 is built to handle some dust and water, but it's meant to live inside the house.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Starlink Mini

The Starlink Mini is a small, portable dish about the size of a laptop. It has Wi-Fi built in, so there's no separate router. People use it for travel, camps and backup internet, and some small homes use it every day.

Powering the Mini

  • Use the power supply and cable that came with it. Starlink only guarantees performance with those.
  • It can also run from a DC source of 12 to 48 volts rated for 60 watts.
  • Or from a USB-C Power Delivery source rated at 100 watts (20 volts, 5 amps). Supplies rated below 100 watts, including common 65-watt laptop chargers, won't run it.
  • It typically uses about 20 to 40 watts.

Checked against Starlink's Help Center articles on powering Starlink Mini and the Mini product page on November 13, 2026.

Wi-Fi on the Mini

The built-in Wi-Fi is the Wi-Fi 5 kind and supports many devices at once, more than enough for a household. Wi-Fi reach is shorter than a separate router's, so in a large house a mesh system may help.

Tip
Same sky rules apply
The Mini needs a clear view of the sky just like the Standard dish. Run the obstruction check for the Mini model in the app.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Getting the Starlink App and Activating

The Starlink app is your control panel. It helps you choose a spot, shows whether you're online, runs speed tests, changes Wi-Fi settings and sends support requests.

  1. Install the Starlink app from the App Store (iPhone) or Google Play Store (Android). Check that the publisher is Starlink (SpaceX).
  2. Sign in with the email and password you used when ordering.
  3. Set the dish in your chosen spot and connect the cable to the router, then plug the router into power.
  4. Give the dish a few minutes. It moves to aim itself at the sky; that's normal.
  5. On your phone, join the Starlink Wi-Fi network. The app guides you through naming it and setting a password.
  6. When the app shows Online, you're connected.
Good to know
It may take a little while
On the very first start, the dish may download updates and search the sky. Give it time before deciding something is wrong. If the app says Booting for a long time, see Internet Stopped Working: First Steps.
Scam alert
The real app only
Install only the official Starlink app from your phone's app store. Never install an app, or give remote access to your computer, because a caller says it's needed for Starlink.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Check for Obstructions: Finding the Spot

Before you mount anything, use the app to find the spot with the clearest sky. This is the most important step in the whole setup.

  1. Open the app and tap Find an Install Location (or Check for Obstructions).
  2. Select your hardware model.
  3. Stand where the dish would go, holding the phone at the planned mounting height.
  4. Sweep the sky as the app directs.
  5. Look at the result: No Obstructions is what you want.
  6. Try each candidate spot and compare.

Checked against Starlink's Help Center articles on checking for and fixing obstructions on November 13, 2026.

Good spots, and spots to avoid

Usually goodUsually poor
A roof peak or high on a gableUnder or beside tall trees
A tall pole in an open yardClose against a two-story wall that blocks half the sky
An open area of lawn, away from treesLow on a porch with a roof overhead
Somewhere snow won't bury itSpots where snow slides off the roof onto the dish
Tip
Think a few years ahead
Small trees grow. A spot that's clear today may be blocked in a few summers. Higher spots tend to stay clear longer.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Mounting the Dish

The kickstand lets you test the dish on the ground. For everyday use, most homes mount it somewhere higher and more permanent. Starlink sells mounts for walls, roofs and poles in its online shop.

Your options

OptionIn short
Kickstand on the groundQuick and easy. Fine in an open yard; watch for mowers, pets and snow.
Roof mountOften the clearest view. Involves a ladder and drilling into the roof.
Wall or eave mountGets the dish up high without going onto the roof.
Pole mountLifts the dish above fences and low trees in the yard.

Before you drill

  1. Test the exact mounting spot with the kickstand first, and check the app for a day.
  2. Plan the cable route from the dish to the router (next chapter).
  3. Make sure the mount suits your roof or wall, and seal any holes against water.
  4. Keep the dish away from power lines.
Safety
Ladders and roofs
Please don't go up a ladder or onto a roof alone. A fall is a far bigger problem than a slow internet connection. A family member, a handyman or a professional installer is worth it.
From Bill
I can help plan it
I'm glad to help you pick the spot and the cable route, set up the app and Wi-Fi, and point you toward the right kind of installer for the roof work.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Running the Cable Indoors

The cable from the dish has to reach the router inside. With the Standard kit you have about 15 meters (roughly 50 feet) to work with.

  1. Measure the path from the dish to where the router will sit, following walls and eaves rather than a straight line.
  2. Decide how the cable will come in: through a wall, a window frame, a basement rim joist or an existing cable entry.
  3. Avoid sharp kinks, pinching in doors or windows, and spots where it can be stepped on.
  4. Place the router somewhere central and off the floor, where its Wi-Fi can reach the rooms you use most.
  5. Connect, power up, and check the app shows Online.

Checked against Starlink's Help Center article "How much cable do I have and how do I route it indoors?" on November 13, 2026.

Watch out
No cutting, no splicing
Don't cut the cable to feed it through a small hole, and don't extend it with other cables. Starlink advises against both.
Tip
A drip loop
Where the cable enters the house, let it dip down a little before it goes in. Rainwater then drips off the low point instead of following the cable inside.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

The Router and Your Wi-Fi

Router 3 turns the Starlink connection into Wi-Fi. You set its network name and password in the Starlink app.

Changing the Wi-Fi name or password

  1. Open the Starlink app.
  2. Go to Settings and find the router's Wi-Fi settings.
  3. Change the network name or password and save.
  4. Reconnect each of your devices with the new password.

Getting Wi-Fi to every room

  • Place the router centrally and up off the floor.
  • Plug a TV or desktop computer into one of the router's two Ethernet ports for the steadiest connection.
  • For a big house, Starlink offers mesh Wi-Fi units that work with its router. Or you can connect your own mesh system, such as eero, to the router; see Bill's eero manual.

Checked against Starlink's Standard kit and Router 3 specification sheets on November 13, 2026.

Tip
Switching from an old provider
If you give the Starlink network the same name and password as your old Wi-Fi, most devices reconnect on their own. Turn the old router off first.
Good to know
Write it down
Record the Wi-Fi name and password in the cheat-sheet at the end of this guide.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

A Tour of the Starlink App

You don't have to open the app every day. But it's worth knowing what's in it, so you know where to look when something seems off.

AreaWhat you'll find
Home screenShows whether you're Online, plus any alerts.
Speed testMeasures the speed to the router and to your phone.
StatisticsShows outages and interruptions over time, and their causes.
ObstructionsA map of the sky showing where the dish's view is blocked.
SettingsWi-Fi name and password, snow melt, software update time, stow, reboot.
SupportHelp articles and sending a support ticket.
Good to know
Alerts aren't always problems
Some app alerts are just advice. Starlink notes that not every alert affects your service. Read it, and act if it suggests a step.

Checked against Starlink's Help Center article "What are the alerts on my Starlink App?" on November 13, 2026.

Tip
Keep the app up to date
Let your phone update the Starlink app along with your other apps. Menu names can shift a little between versions, so if a button in this guide looks different, look for the word in bold nearby.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

The Obstruction Map After Setup

Once your dish is running, the app builds an obstruction map from the dish's real connections to satellites. It's different from the camera scan you did before setup, and more accurate.

  1. Open the app and look for Obstructions, or the obstruction check in Settings or the visibility screen.
  2. Give it time. The map can take up to 12 hours to fill in after setup or after you move the dish.
  3. Look for marked areas. They show where something blocks the view.
  4. Match those areas to what's around you: a tree to the north, a chimney, a neighbor's barn.

Checked against Starlink's Help Center articles on checking for and fixing obstructions on November 13, 2026.

Fixing obstructions

  • Move the dish higher, or to a spot clear of the obstruction.
  • Trim the branches in the way, if they're yours and it's safe to do.
  • After moving the dish, reset the map and let it fill in again.
Tip
A little is normal
A small obstruction may cause only brief blips you never notice. A big one causes frequent dropouts, especially on video calls.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Snow, Rain and Ohio Weather

Starlink is designed for outdoor life, including Northeast Ohio winters. Knowing what the dish does on its own saves a lot of worry.

Snow

  • The dish has a snow melt feature that gently heats it to melt snow.
  • In the app, snow melt can be set to Automatic (recommended; heats only when it detects snowy conditions), Pre-heat (keeps the dish warm, using more power) or Off.
  • Starlink lists the Standard dish as melting up to about 1.5 inches of snow per hour.
  • Heavy snow that buries the dish can still interrupt service, so mount it where snow won't pile up or slide onto it.

Checked against Starlink's Help Center articles "How Starlink Performs in Snow and Ice" and "How do I adjust snow melt mode?" on November 13, 2026.

Rain, wind and cold

  • The dish is built to work in the wet. Very heavy rain or wind can slow it or cause a rare brief outage.
  • The Standard dish is rated to keep working in winds up to about 60 miles per hour.
  • Light ice and icicles generally don't affect it.
Watch out
Hands and tools off the dish
Don't scrape the dish with picks, chisels or scrapers, and don't put a cover on it. Covers degrade performance and get in the way of snow melt.
Good to know
Severe storms
Starlink says its hardware isn't designed for hurricanes, tornadoes or similar extreme events.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Software Updates and the Overnight Reboot

Your Starlink downloads software updates on its own. To apply them, it normally reboots overnight, around 3:00 a.m. local time. You'll rarely notice, unless you're up late on a video call.

  1. Open the app and go to Settings.
  2. Find Software Updates.
  3. Choose the time window that suits you: overnight, morning, afternoon or evening.

Checked against Starlink's Help Center article "What are the alerts on my Starlink App?" on November 13, 2026.

Good to know
If it rebooted by itself
A short overnight drop is usually just the update reboot. Nothing is wrong, and nothing needs to be done.
Tip
Apply an update now
If the app says an update is waiting, a manual reboot from the app applies it right away.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Stowing the Dish

Stowing tips the dish into a flat position for moving or packing. You'd do it if you take a Standard kit off its mount, or before storing it.

  1. Open the app and go to Settings, then Starlink.
  2. Drag the slider to Stow Starlink.
  3. Wait for the dish to finish moving before unplugging it.

Checked against Starlink's Help Center article "How do I stow my Starlink?" on November 13, 2026.

Good to know
Not every model needs it
Stowing applies to certain dish models. If you don't see the option, your model may not need it; Starlink's help article lists which do.
Tip
Unstowing
When you plug the dish back in at its spot, it aims itself again. Give it a few minutes.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Video Calls, Streaming and Smart Devices

Most households on Starlink video-call family, stream TV and run smart devices without trouble. A few habits help.

  • Video calls: a clear sky matters most. If calls freeze for a few seconds now and then, check the obstruction map.
  • Streaming TV: plug a TV near the router into an Ethernet port for the steadiest picture.
  • Smart speakers, plugs and cameras: they join the Starlink Wi-Fi like any device. Each needs its own app to switch networks if you changed the Wi-Fi name.
  • Security cameras upload video all day. If uploads feel slow, lower the camera's video quality in its app.
Good to know
Speed tests
Run tests near the router and compare with a test far away. If it's fast near the router but slow far away, the issue is Wi-Fi reach, not the satellite. Bill's Slow Internet? Speed Tests & Fixes manual goes deeper.
Tip
Medical alerts and alarms
If a medical alert or monitored alarm depends on your internet, test it with the monitoring company after switching to Starlink.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Moving or Changing Your Service Address

A Residential plan works at the service address on your account. If you move house, update the address before you use the kit at the new place.

  1. Check the new address on Starlink's coverage map at starlink.com/map.
  2. In the app, open the menu and choose Manage Subscription, then Service Location.
  3. Enter the new address and tap Set Service Address.
  4. Allow 15 to 30 minutes for your account to update.

Checked against Starlink's Help Center article "How do I change my service address?" on November 13, 2026.

Watch out
The old address stops working
Changing the service address turns off service at the old address, and you may not be able to switch back. Plan prices can also differ at the new address.
Good to know
On the website
You can also change it at starlink.com: sign in, go to Subscriptions, click Edit next to Service Location, enter the new address and save.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Away for a While? Pausing Service

If you're away for months, such as wintering in the South, you may not want to pay full price for a dish nobody's using. Starlink has offered a low-cost Standby Mode for this.

  • Standby Mode keeps a very slow connection active for a small monthly fee, instead of the full plan price.
  • In 2026 the Standby fee went up. It has been reported at about $10 a month. Check the current fee in the app.
  • You can switch back to your full plan when you return.
Watch out
Confirm before you go
Plan options and fees change. Before leaving, check the app's subscription screen for the current options, and write down what you chose and when it takes effect.
Tip
Doorbells and cameras
If you rely on cameras or a smart thermostat while away, Standby's very slow speed may not be enough for them. Weigh that before pausing.
Good to know
Canceling is different
Pausing keeps your account and plan option. Canceling ends service; see Canceling and Returning the Kit.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Staying Safe

Internet Stopped Working: First Steps

Take a breath. Most problems are fixed by the same few steps. Work down the list and stop as soon as things work again.

  1. Check another device. If your phone works on Wi-Fi but the TV doesn't, the problem is the TV.
  2. Open the Starlink app (using your phone's mobile data if Wi-Fi is down). Read any alert on the home screen. One alert tells you there's a service outage in your area that Starlink is working on.
  3. Check the power. Is the router plugged in and its light on? Has a breaker tripped or an outlet switched off?
  4. Restart. Unplug the router's power, wait a full minute, and plug it back in.
  5. Give it time. If the app says Booting, keep the dish outside with a clear view and wait at least 20 minutes.
  6. Still stuck? Send a support ticket from the app. Tickets from the app include details about your Starlink that help support.

Checked against Starlink's Help Center articles "App Says Starlink is Offline - Booting" and "What are the alerts on my Starlink App?" on November 13, 2026.

Good to know
Power outages
The dish and router need electricity. When the power goes out, so does Starlink. A battery backup can carry you through short outages; see Bill's Surge Protectors & Battery Backups manual.
Tip
Snowy morning?
If it snowed heavily overnight, the dish may simply be covered. Snow melt usually clears it; see Snow, Rain and Ohio Weather.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Staying Safe

Slow or Dropping Connection

If Starlink works but feels slow, or drops for a few seconds at a time, sort out whether the cause is the sky view, the Wi-Fi inside, or simply a busy time.

What you noticeLikely causeWhat to try
Short dropouts, a few seconds eachObstructionsCheck the obstruction map; move the dish higher.
Fast near the router, slow far awayWi-Fi reachMove closer, use Ethernet, or add mesh Wi-Fi.
Slower in the eveningsBusy network timesSchedule big downloads overnight; consider plan priority.
Slow during a heavy stormWeatherWait it out; service usually recovers on its own.
One device slow, others fineThat deviceRestart it; forget and rejoin the Wi-Fi.

Using the app to find the cause

  • Check the Statistics or outages view in the app. It shows when interruptions happened and often why.
  • Run a speed test from the app, close to the router.
  • Look at the obstruction map for new blocked areas. Trees leaf out in spring.
Tip
Notes help
If you contact support, a short list of when the problem happens (time of day, weather) gets you further than "it's slow."
Good to know
Plan speed matters at busy times
Starlink says the 200 Mbps plan may be slower at peak hours than Residential Max, which gets the highest network priority.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Staying Safe

Getting Help from Starlink

Starlink's support is mostly online, through the app and your account at starlink.com. There's also a phone line for the U.S. and Canada.

Ways to reach real Starlink support

  • In the app: open Support and send a ticket. App tickets include helpful details about your equipment.
  • On the website: sign in at starlink.com and use the Support section.
  • By phone (U.S. and Canada): Starlink's Help Center lists 888-GO-STARLINK (888-467-8275), answered 24/7 in English. You can also ask for a call back through a support request.
  • Starlink says it doesn't charge a fee for phone calls with its support team.

Checked against Starlink's Help Center article "Contact Starlink Customer Support" on November 13, 2026.

Scam alert
Fake support numbers
Scammers buy search ads and post fake "Starlink support" numbers. Get the number from the app or from starlink.com typed in yourself. Real support won't ask for gift cards, cryptocurrency or remote control of your computer.
Tip
Have these ready
The email on your account, your service address, and a short description of the problem and when it started.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Staying Safe

Fake Starlink Deals and Scams

Because Starlink is popular and talked about, scammers use its name. News outlets and security researchers have reported fake ads on social media offering "lifetime" Starlink for one small payment, and copycat websites made to look like Starlink's.

Red flags

  • "Lifetime" service, or a deep discount for paying today.
  • An ad on social media that leads to a website address that isn't starlink.com.
  • Paying in cryptocurrency, gift cards, or through a payment app to a person.
  • Spelling mistakes, countdown timers and pressure to act now.
  • A "senior discount" or government-program offer you can't find on starlink.com.
Scam alert
Gift cards are for gifts
The Federal Trade Commission warns that only scammers ask you to pay with gift cards, including callers posing as internet companies who offer big discounts. Hang up, and contact the company using a number or website you know is right.

Checked against FTC consumer alerts on internet-provider impostors and gift-card scams on November 13, 2026.

If you already paid

  1. Call your bank or card company right away using the number on your card, and tell them it was a scam.
  2. If you paid with a gift card, contact the company that issued the card.
  3. Report it at ReportFraud.ftc.gov.
  4. Change the password on any account you entered on the fake site.
Watch out
Bill's guide for next steps
Bill's I Think I've Been Scammed manual walks through everything to do after a scam, calmly and in order.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Staying Safe

Canceling and Returning the Kit

If Starlink isn't right for you, cancel properly and, if you're eligible, return the hardware on time. Here's how Starlink's Help Center describes it.

Within the 30-day window

  1. Sign in to your account in the app or at starlink.com.
  2. Cancel your subscription, and tick the box for a hardware return.
  3. Watch your email for the prepaid return label.
  4. Pack the dish, router, cables and power supply, attach the label and ship it.

Checked against Starlink's Help Center article "How do I return my Starlink kit?" on November 13, 2026.

Other situations

SituationWhat happens
Rented kitReturn it in good condition within 30 days of canceling, or you're charged the full kit price.
Bought from a storeThe store handles the hardware return. Cancel the service with Starlink yourself first.
Mounts and accessoriesFrom the Starlink Shop, returnable within 30 days of delivery through Your Orders.
After 30 days (owned kit)No hardware refund. You can still cancel the service.
Tip
Protect yourself
Write down the date you canceled, keep the return label's tracking number, and take a photo of the packed box. Check your next statement for any unexpected charge.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When to Call Bill & Your Cheat-Sheet

When to Call Bill

This guide covers what you need to choose, set up and live with Starlink on your own. But part of being helpful is being honest about when a hand saves you time and worry. Here's when I'd pick up the phone.

Good reasons to call

  • You're deciding between Starlink, 5G home internet and DSL, and want a second opinion. That's what my Wi-Fi Help visit is for.
  • You'd like help running the obstruction check and choosing the spot and cable route.
  • Your Wi-Fi doesn't reach the far bedroom or the barn, and you're weighing mesh Wi-Fi.
  • You're moving every device, from TV to printer to doorbell camera, over from an old provider.
  • An ad or a caller is offering a Starlink "deal" that seems too good.
  • You're canceling and want to be sure everything goes back on time.

Things you can handle yourself

Checking the app, reading an alert, restarting the router, running a speed test, setting snow melt to Automatic, and ignoring a "lifetime Starlink" ad. These are yours now.

Safety
Roof work
I'll happily help plan a mount, but I'd always rather you hire a professional for anything on a roof than climb up yourself.
From Bill
How I like to help
I'm Bill, and I bring 30+ years of professional experience to helping folks feel at home with their technology, right here in Portage County, Ohio. I don't rush, I don't talk down to anyone, and there's no such thing as a silly question. $49 remote · $99 in your home. Call or text (330) 200-8042 or book at billshometech.com/book. If you reach my assistant Sophie on the main line, she can answer simple questions and get you on my schedule.

Thank you for taking the time to learn this. For a lot of homes on long country roads, a well-placed Starlink dish is the first truly good internet they've had, and now you know how to make the most of it.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When to Call Bill & Your Cheat-Sheet

Your Starlink Cheat-Sheet

Keep this handy. The everyday moves, all in one place.

The everyday moves

To do thisDo this
Check your skyStarlink app > Find an Install Location > choose model > scan at mounting height.
See the obstruction mapApp > Obstructions (allow up to 12 hours to fill in).
Snow meltApp > Settings > snow melt > Automatic.
Update timeApp > Settings > Software Updates > choose a window.
Stow the dishApp > Settings > Starlink > slide to Stow Starlink.
RestartUnplug the router's power, wait one minute, plug back in. If Booting, wait 20 minutes.
Change addressApp > menu > Manage Subscription > Service Location.
Get helpApp > Support > ticket, or 888-GO-STARLINK (888-467-8275).
Cancel / returnAccount > cancel subscription > tick hardware return (within 30 days).

The safety rules

  • Order only at starlink.com, typed in yourself, or from a store you know.
  • "Lifetime" Starlink deals are fake.
  • No real company asks for gift cards or cryptocurrency.
  • Get support numbers from the app or starlink.com, never from an ad.
  • Never climb onto a roof or ladder alone.

Keep these handy

My Starlink details
My plan__________________________________
Delivery date / last return date__________________________________
Account email__________________________________
Wi-Fi name__________________________________
Wi-Fi password__________________________________
Where the dish is mounted__________________________________
Starlink support888-GO-STARLINK (888-467-8275) · in the app
Bill's Home Tech(330) 200-8042 · billshometech.com/book
Why it helps
Connected, even out here
You can now judge whether your property suits Starlink, choose a plan without overpaying, find the clearest spot, keep it running through an Ohio winter, and spot the fake deals. That's real independence.

Bill's Home Tech · Complete Manuals Series · (330) 200-8042 · billshometech.com · Portage County, Ohio

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
Step 1 of 5
1