Bill's Home Tech
Portable Power Stations — help from Bill

Portable Power Stations Manual

What are you trying to do?

Type it in plain words — like "how long will it run my CPAP" or "nothing comes out of the outlets."

Keep it handy
Reading is free, with no sign-up. If you'd like, we can email you the link.
Bill's Home Tech · All manuals · (330) 200-8042 · Serving Portage County, Ohio
Prefer paper? Print this guide
All topics
Getting Started

A Note from Bill

Hello, and welcome. If you've seen those boxy batteries with handles in the store or in a TV ad and wondered, "Would one of those keep my things going when the power goes out?" — this guide is for you. And if someone in the family just gave you one for a birthday or the holidays, and it's still sitting in the box, this guide is for you too.

I'm Bill. I've spent more than 30 years working with technology, and these days I help folks here in Portage County feel at home with theirs. I wrote this guide the way I'd explain it at your kitchen table: slowly, in plain English, and without trying to sell you anything. When I use a word like "watt-hour" or "inverter," I'll stop and explain it right then.

What this guide will do for you

  • Explain what a portable power station is — and what it isn't — in a few minutes.
  • Teach you the two numbers on the box that matter most, so you buy the right size the first time.
  • Walk you through the first charge, the buttons, the screen and the phone app.
  • Show you how solar panels work with a power station, and how to choose ones that fit.
  • Help you build a simple outage plan: Wi-Fi, phones, a CPAP, the refrigerator.
  • Cover safe use, storage, recalls, recycling, and the fake "huge discount" websites to steer clear of.

The big promise: you can't break it by learning

A power station is one of the friendliest gadgets in the house. You press a button, plug something in, and it works. Most of what's in this guide is about choosing, charging and plugging in — things you can do slowly and undo if you change your mind. The one job that is truly dangerous — connecting backup power to your home's wiring — I'll mark clearly as a job for a licensed electrician. I'm a technology helper, not an electrician, and I'll always tell you honestly which is which.

Why it helps
Why this matters
A power station is quiet, makes no fumes, and can sit safely in your living room. During an outage it can keep your phone charged, your internet on, a lamp lit and, with the right size, a CPAP or a refrigerator running. That's the difference between sitting in the dark wondering and staying in touch with the people who matter.

I'm only a phone call away

If anything in this guide leaves you unsure, call me at (330) 200-8042. There's no such thing as a silly question, especially about electricity, where it's always smarter to ask first.

Let's start with the simplest question: what exactly is this box?

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Ways Your Power Station Can Make Life Easier

A power station isn't only for emergencies. These three small setups take a little time on a calm day and make it far more useful, and far less worrying, every day of the year. A family member can help with any of them.

1. Check on your power station from anywhere

Why it helps
Why this helps
Once the station is on your home Wi-Fi, the maker's app shows its battery level and what it's powering from wherever you are. If you're away and hear the power went out at home, one look at your phone tells you whether the internet and the refrigerator are still running, and how long the battery has left.
  1. Install the maker's app — Jackery, EcoFlow, Anker (for Anker SOLIX) or BLUETTI — from the App Store or Google Play, and sign in.
  2. Stand near the power station with your phone's Bluetooth on, and add the station in the app (often the + sign).
  3. When the app offers Wi-Fi, choose your home network and type the password. Pick the 2.4 GHz network if your router lists two.
  4. Turn on the app's notifications when your phone asks, so you can be alerted about the station.
  5. Test it: turn off your phone's Wi-Fi so it uses cell data, open the app, and check that you still see the battery level.
Tip
Good to know
Free with the station; it needs your home Wi-Fi and an account with the maker. Jackery and Anker say the first connection is made over Bluetooth and then Wi-Fi is added, and Jackery's stations join 2.4 GHz Wi-Fi only. Bluetooth alone works only within a short distance of the station.

Checked against Jackery Support, Anker SOLIX Support and BLUETTI on November 13, 2026.

2. Let it switch on by itself when the power fails

Why it helps
Why this helps
Leave the station plugged into the wall with the modem and router plugged into it. When the power fails, it takes over in a fraction of a second, so your Wi-Fi, and a cordless phone base if you power it too, keep working, even in the middle of the night when nobody's awake to plug anything in.
  1. Check your manual or the maker's product page to confirm your model offers UPS or EPS (backup) mode.
  2. Plug the station into a wall outlet and let it charge to full.
  3. Plug the modem and router into the station's outlets, and turn its AC outlets on.
  4. In the app, look for a backup or UPS setting, and a charge limit if offered, and follow your maker's recommendation.
  5. Test it on a calm day: unplug the station's charging cord from the wall. The Wi-Fi lights should stay on. Plug it back in.
Tip
Good to know
No extra cost if your model supports it. Makers list a switchover time in milliseconds; Jackery, for example, lists 20 milliseconds or less for the Explorer 1000 v2, which routers and lamps don't notice. For a desktop computer that must never blink, or for life-support equipment, follow the advice in the guide's battery-backup chapter instead.

Checked against Jackery product page on November 13, 2026.

3. Practice a solar charge on a sunny afternoon

Why it helps
Why this helps
Setting up solar panels for the first time during a storm cleanup is stressful. A practice run on a sunny day shows you which spot in the yard works best, how many watts you really get, and that the cables fit. Then you'll know exactly what to do in a long outage.
  1. Check that your panels are listed as compatible by your station's maker, or that their voltage (Voc) and current are inside your station's solar input range.
  2. Pick a sunny spot facing roughly south, away from shade. Unfold the panel and tilt it toward the sun.
  3. Keep the station indoors or in the shade. Connect the panel cable, using the maker's adapter if needed.
  4. Watch the input watts on the screen. Turn and tilt the panel slightly to find the highest number.
  5. Write the best number and the spot on your Cheat-Sheet. Unplug at the station first, then fold the panel and bring it in.
Tip
Good to know
Free once you own panels; folding panels are an added cost, often sold in bundles with the station. Jackery says third-party panels can work if their voltage and current fall within the station's DC input range, but it doesn't guarantee other brands, and too high a voltage can stop charging or cause damage.
From Bill
Want a hand setting these up?
I'm happy to connect your power station to the app, set up backup mode for your internet, and do a solar practice run with you. $49 remote · $99 in your home.

Checked against Jackery Help Center on November 13, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

What a Portable Power Station Is

A portable power station is a big rechargeable battery in a sturdy case with a handle. On the front you'll find ordinary household outlets, USB ports for phones and tablets, and usually a round car-style outlet. A small screen shows how full the battery is. You charge it from a wall outlet, a car, or solar panels, then use it to power things wherever you need them.

What's inside, in plain words

PartWhat it does
The batteryStores the energy. Most newer models use LiFePO4 batteries (lithium iron phosphate, sometimes written LFP). Choosing a Size and a Brand explains why that matters.
The inverterTurns the battery's power into the same kind of power that comes out of your wall, so you can plug in a lamp or a CPAP. The household outlets only work when the inverter is switched on.
The chargerLets you refill the battery from the wall, a car outlet, or solar panels.
The brainCalled the battery management system. It watches temperature and charge levels and shuts things off if something is wrong.

Names you'll see on the box

Different companies call these different things. A power station, a portable power station, a battery generator and a solar generator are all the same kind of product. "Solar generator" usually just means a power station sold together with solar panels. There's no engine and no fuel inside any of them.

How it's different from the things it gets confused with

Power stationGas generatorBattery backup (UPS)Power bank
FuelNone — a batteryGasoline or propaneNone — a batteryNone — a battery
Safe indoors?YesNeverYesYes
NoiseQuiet (a fan at times)LoudQuietSilent
Typical sizeAbout 250 to 5,000 WhRuns for hours on a tankMinutes to an hourPhone-sized
Best forOutages, CPAP, campingWhole rooms, long outagesComputer, routerPhones, tablets
Good to know
Pairs with your surge and battery-backup guide
Our Surge Protectors & Battery Backups guide covers small battery backups for computers and routers, and the dangers of gas generators. This guide goes much deeper on power stations themselves: sizing, charging, solar panels, and living with one.
Why it helps
What this does for you
Once you know a power station is simply a big, safe, quiet battery, the rest of this guide is just learning how big a battery you need and how to keep it ready.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Is a Power Station Right for You?

Power stations are wonderful for some jobs and the wrong tool for others. It's worth five minutes to think about what you actually want to keep running before you spend several hundred dollars.

Good reasons to own one

  • Power outages. Keeping phones charged, the internet on, a lamp and a radio going, maybe a small refrigerator or a freezer for a few hours at a time.
  • A CPAP or other plug-in medical device you'd rather not go a night without (CPAP, Oxygen and Medical Equipment).
  • Camping, an RV, a fishing trip or the tailgate — a quiet alternative to a noisy generator.
  • Working outdoors — running a string of lights, a fan, or charging tool batteries away from an outlet.
  • Peace of mind for someone who lives alone and worries about storms.

When a power station is not the answer

  • Running the whole house. Central air conditioning, an electric furnace, an electric water heater or an electric range use far more power than portable units are built for.
  • Long, multi-day outages with heavy needs, unless you also have solar panels and plenty of sun, or a very large system.
  • Life-support equipment as your only plan. A power station can be one layer of backup, but your doctor and equipment supplier should help you plan (CPAP, Oxygen and Medical Equipment).
  • A well pump or sump pump — often possible only with large models, and some need wiring work by an electrician. Ask before buying for that job.
Tip
Start with a list, not a store
Before you shop, write down the three to five things you'd most want running in an outage. Make Your "Must Keep Running" List shows you how to find the watts for each. That one sheet of paper will steer you to the right size.
Good to know
What they cost
As of November 2026, small power stations (roughly 250 to 500 Wh) commonly sell for around $200 to $400; mid-size units around 1,000 Wh often run $400 to $900 depending on sales; and large home-backup units of 2,000 Wh and up can cost $1,000 to several thousand dollars. Prices swing a lot with holiday sales, so treat these as rough ranges.
Why it helps
What this does for you
Knowing what a power station can and can't do keeps you from buying one that's too small to help — or paying for one far bigger than you'll ever use.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Sizing It Right

Watt-Hours and Watts: The Two Numbers That Matter

Every power station lists two numbers in big print. Almost every buying mistake comes from mixing them up. Here's the simplest way I know to keep them straight.

Watt-hours (Wh): the size of the fuel tank

Watt-hours, written Wh, tell you how much energy the battery holds. A 1,000 Wh station holds about four times as much as a 250 Wh one. Bigger means things run longer. Larger units sometimes list kWh (kilowatt-hours) instead: 1 kWh is 1,000 Wh, so a "2 kWh" station is a 2,000 Wh station.

Watts (W): how hard it can push at once

Watts, written W, are about how much power the station can deliver at the same moment. Think of it as the width of the hose. A station rated at 1,500 W can run things that add up to 1,500 watts all at once. Plug in more than that and it will shut off its outlets to protect itself.

Surge or peak watts

You'll also see a larger surge or peak number. Some appliances — refrigerators, freezers, pumps, and power tools with motors — need a short burst of extra power for a second or two when they start. The surge rating tells you how big a burst the station can handle. It is not a number you can run at all day.

What it saysWhat it meansWhy you care
1,024 WhBattery capacityHow long things will run
1,800 WContinuous outputHow many things (or how big a thing) at once
2,700 W surgeShort burst for start-upWhether a refrigerator or pump can start
LiFePO4Battery typeHow many years it should last
Tip
A quick memory trick
Wh = how long. W = how much at once. If your things keep shutting off, you need more watts. If they run fine but the battery empties too soon, you need more watt-hours.
Why it helps
What this does for you
With these two numbers in hand, you can look at any power station from any brand and know in seconds whether it fits your needs — no sales pitch required.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Sizing It Right

Make Your "Must Keep Running" List

The right size depends entirely on what you want to run. This chapter helps you make a short list and find the watts for each item. Grab a pencil and a flashlight — some of these labels hide on the back or bottom of things.

Finding the watts on a device

  1. Look on the back or bottom of the device, or on its power brick (the little box on the cord), for a label.
  2. If you see a number followed by W, that's the watts. Write it down.
  3. If you only see volts (V) and amps (A), multiply them. For example, a power brick that says 12V and 2A uses up to 12 × 2 = 24 watts.
  4. For appliances, look for the yellow EnergyGuide label or the owner's manual. It may list yearly energy use in kWh rather than watts; Refrigerators and Freezers shows how to use that for a refrigerator.
  5. If you can't find anything, search the model number online with the word "watts".
Good to know
Labels show the most, not the usual
The number on a label is usually the most the device can draw, not what it normally uses. A router brick labeled 24 watts may really use 10 to 15. That's fine: using the label gives you a safety cushion. Many power stations also show the live watts on their screen, which is the real number (Reading the Screen and the Buttons).

A sample list

DeviceTypical range (always check yours)
Modem and routerOften about 10 to 30 W together
Cell phone chargingAbout 5 to 25 W while charging
LED lampAbout 5 to 15 W
LaptopAbout 30 to 100 W while charging
CPAPVaries widely by model and settings — the heated humidifier uses the most (CPAP, Oxygen and Medical Equipment)
Full-size refrigeratorOften a few hundred watts while running, with a bigger start-up surge
Microwave, coffee maker, toasterOften 800 to 1,500 W or more — heavy, but only for minutes
Space heaterCommonly 1,500 W — drains a power station very fast
Watch out
These are rough ranges
The numbers above are typical ranges, not promises. Your own devices' labels and the power station's screen are what count. Write your own numbers on the list in the Cheat-Sheet (Your Power Station Cheat-Sheet).
Why it helps
What this does for you
A five-minute list replaces guesswork. You'll know whether a small, light station will do, or whether you need a bigger one for the refrigerator.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Sizing It Right

The Runtime Math, Step by Step

"How long will it last?" is the question everybody asks. You can get a good rough answer with simple division. A calculator on your phone is all you need.

The simple formula

  1. Find the station's capacity in watt-hours. Say it's 1,000 Wh.
  2. Add up the watts of everything you'll run at the same time. Say a modem and router (20 W) plus a lamp (10 W) = 30 W.
  3. Divide: 1,000 ÷ 30 = about 33 hours.
  4. Now take a fair bite off that answer — about a fifth is a common rule of thumb — because some energy is lost turning battery power into household power, and batteries keep a little in reserve. That leaves roughly 26 hours.
  5. Treat the answer as a rough guide, not a promise. Cold weather and devices that cycle on and off change it.

Two more worked examples

ExampleThe math
Phones onlyCharging a phone fully takes very roughly 10 to 20 Wh. A 300 Wh station can recharge a phone many times over — enough for a household for days.
A laptop all eveningA laptop using about 50 W for 5 hours is 250 Wh. A 500 Wh station handles that with room to spare; a 250 Wh station would be cutting it close.
Tip
Use USB when you can
Charging phones and tablets from the station's USB ports, instead of plugging their wall chargers into its household outlets, usually wastes less energy — and you can leave the household outlets (the inverter) switched off, which also saves power.
Good to know
The station will tell you, too
Most power stations show an estimated "time remaining" on the screen based on what's plugged in right now. It jumps around as devices turn on and off, but after a few minutes it settles into a useful number.
Why it helps
What this does for you
Ten seconds of division tells you whether you'll make it through the night — before the storm, not during it.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Sizing It Right

What It Can and Can't Run

Here's a plain-English look at common household items and how they get along with power stations. "Small" means roughly 250 to 500 Wh, "medium" about 1,000 Wh, and "large" 2,000 Wh and up.

ItemSmallMediumLargeNotes
Phones, tablets, hearing-aid chargersYes, for daysYesYesThe easiest job of all
Modem & routerMany hoursA day or moreDaysKeeping Wi-Fi and Phones Going
LED lamps, radio, fanYesYesYesSmall fans use little
CPAPA night or so*Several nights*Many nights**Humidifier off; CPAP, Oxygen and Medical Equipment
TV and streaming boxA few hoursMany hoursYesCheck the TV's watts
RefrigeratorUsually notSome hoursLongerCheck surge rating; Refrigerators and Freezers
Microwave, coffee makerUsually notOften, brieflyYes, brieflyDrains fast
Space heater, hair dryerNoVery brieflyBrieflyNot a good use
Central A/C, electric furnace, water heater, rangeNoNoNoWhole-house jobs
Watch out
Heat is the battery-killer
Anything that makes heat with electricity — space heaters, hair dryers, toasters, electric blankets on high, kettles — uses a lot of power. Even a large station will drain in an hour or two running a space heater. In a winter outage, blankets and layers go much further.
Safety
Gas furnaces and power stations
Many gas furnaces need electricity for the blower and controls. Connecting a furnace to backup power usually means wiring work, which is a job for a licensed electrician or your heating contractor — never something to improvise with extension cords or by cutting a plug onto the furnace.
Why it helps
What this does for you
Knowing ahead of time what's realistic keeps you from being disappointed in the middle of an outage, and helps you save the battery for the things that matter.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Sizing It Right

Choosing a Size and a Brand

The four brands you'll see most in stores and online are Jackery, EcoFlow, Anker SOLIX and BLUETTI. All four sell a range from small to very large, and all four have phone apps. I don't recommend one brand over another; I'd rather teach you what to look for on any box.

Five things to check on any model

  1. Capacity (Wh) that fits your list from Make Your "Must Keep Running" List, with some cushion.
  2. Output (W) higher than the total of what you'll run at once, and a surge rating high enough for anything with a motor.
  3. Battery type. LiFePO4 (LFP) is the type most new models use. Makers rate these batteries for thousands of charge cycles before they fall to about 70 to 80 percent of their original capacity. For most households that's many years of use.
  4. A safety listing. Look for a listing to UL 2743, the safety standard for portable power packs, from a recognized testing lab, on the product or in its specifications.
  5. Warranty and support. Many major brands offer several years of warranty on newer models. Check the length and that there's a U.S. support phone number or website.

Checked against UL Solutions on November 13, 2026.

Weight matters more than you'd think

A 1,000 Wh station commonly weighs somewhere around 20 to 30 pounds, and 2,000 Wh models can weigh 40 to 60 pounds or more. If you'll carry it up from the basement in the dark, try lifting one in the store first. Some larger models have wheels and a pull handle.

Expansion batteries

Many mid-size and large models can add an expansion battery (sometimes called an extra battery) that plugs into the main unit to add more watt-hours. It's a way to start smaller and grow later. Expansion batteries only work with the specific models the maker lists, so check before buying.

Good to know
What "LiFePO4" means for you
LiFePO4 batteries are known for long life and stability. Older and some lighter models used other lithium-ion types that wear out sooner. If two models are similar in price, the LiFePO4 one will usually last more years. Each maker publishes its own cycle rating — some rate to 70 percent capacity, some to 80 — so compare carefully.

Checked against Jackery, EcoFlow, Anker SOLIX and BLUETTI product pages on November 13, 2026.

Tip
One size for most households
For an outage plan focused on Wi-Fi, phones, lights and maybe a CPAP, a station of about 1,000 Wh is a sensible middle ground for many homes. If the refrigerator is a must, look at 2,000 Wh and up, or plan on solar panels to refill it.
Why it helps
What this does for you
Comparing on these five points — not on the color of the box or the size of the discount — gets you a station that will still be doing its job years from now.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Day One with Your Power Station

Unboxing and the First Charge

Most power stations arrive partly charged. Even so, the best first step is a full, calm charge at home, so you know it works and you learn how long charging takes.

What's usually in the box

  • The power station itself.
  • A wall charging cord. Many newer models have the charger built in, so it's an ordinary cord; others use a separate power brick.
  • A car charging cable that plugs into a car's 12-volt outlet (sometimes sold separately).
  • Sometimes a solar adapter cable for panels from other makers.
  • A user manual and a warranty card. Keep both — Your Power Station Cheat-Sheet has a place to write down the model and serial number.

The first charge, step by step

  1. Set the station on a hard, flat surface — a floor, a table, a counter — away from beds, curtains, and anything that could fall on it.
  2. Leave a few inches of space around the vents so the fan can breathe.
  3. Plug the wall charging cord into the station's AC input port (the label usually says AC IN or shows a wall-plug symbol), then into a wall outlet.
  4. Watch the screen. It should show the battery percentage climbing and the watts coming in.
  5. Let it charge to 100 percent. Depending on the model and charging mode, this can take anywhere from about an hour to several hours.
  6. Unplug it. Press the power button to see that the screen comes on and shows 100 percent.
Tip
Write down the date
Note the date of the first full charge on the Cheat-Sheet in Your Power Station Cheat-Sheet. It's your starting point for the "top it up every few months" habit in Storage and Long-Term Care.
Watch out
Use the cords that came with it
Charge it with the maker's own cord or charger, or one the maker lists as compatible. A random charger from the junk drawer may not fit properly or may charge slowly.
Why it helps
What this does for you
One full charge on a calm day proves the station works, teaches you how long refilling takes, and means you're ready if the lights go out tonight.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Day One with Your Power Station

Reading the Screen and the Buttons

Every brand's layout is a little different, but almost all power stations have the same few buttons and show the same few numbers. Once you know them, you can use any model.

The buttons

ButtonWhat it does
Main power buttonTurns the station (and its screen) on and off. Usually you press and hold it for a second or two.
AC buttonTurns the household outlets on and off. This is the one people miss. If your lamp won't light, the AC outlets are probably switched off. A small light or an "AC" icon on the screen shows when they're on.
DC or USB buttonTurns the USB ports and the car-style outlet on and off. On some models the USB ports are always on.
Light buttonMany models have a built-in light on the side or front. Handy in a dark outage.
IoT or Wi-Fi buttonOn some models, used to pair with the phone app (The Phone App).

The numbers on the screen

ShowsMeans
Battery percentHow full it is. 100 percent is full.
Input wattsHow fast it's charging right now, from the wall, the car, or solar.
Output wattsHow much power everything plugged in is using right now — the real number for your list.
Time remainingAn estimate of how long until empty (or full, while charging). It changes as devices turn on and off.
Warning iconsSymbols for overload, high temperature, or a fault. Check the manual for your model's list.

Turning it on and plugging something in

  1. Press and hold the main power button until the screen lights up.
  2. Press the AC button if you're using a household plug, or the DC/USB button for USB devices.
  3. Plug in your device and turn it on.
  4. Check the output watts on the screen. That's what the device really uses.
  5. When you're finished, unplug the device and press the AC or DC button again to switch those outlets off. Leaving the AC outlets on with nothing plugged in still uses a little battery.
Tip
If it beeps or shuts off
Most often it's an overload: you've plugged in more watts than the station can deliver. Unplug the biggest item, then turn the AC outlets back on. If it shows a temperature warning, move it somewhere cooler and give the vents room.
Why it helps
What this does for you
The output-watts number turns guesswork into knowledge. Plug in each item on your list once, write down the real number, and your runtime math in The Runtime Math, Step by Step becomes far more accurate.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Day One with Your Power Station

Charging It: Wall, Car, and More

A power station is only useful if it's full when you need it. There are three common ways to fill it up, and many models let you combine them.

1. From a wall outlet (fastest and simplest)

This is how you'll charge it most of the time. Many newer models offer a fast-charge mode that can fill the battery in roughly an hour, and a quieter, slower mode that's easier on the battery and the fan noise. The app or a switch on the unit chooses between them. If you're not in a hurry, the slower mode is perfectly fine.

2. From the car

  1. Start the car (charging with the engine off can drain the car's own battery).
  2. Plug the car charging cable into the car's 12-volt outlet (the old cigarette-lighter socket).
  3. Plug the other end into the station's car or DC input port.
  4. Expect it to be slow: a car outlet delivers far less power than a wall outlet, so a 1,000 Wh station can take many hours. It's best for topping up during a drive.
Safety
Never charge in a closed garage
Never run a car in a closed or attached garage to charge anything, even with the door partly open. Car exhaust contains carbon monoxide, which you can't see or smell. Charge from the car only while driving or with the car parked outdoors, well away from the house.

3. From solar panels

Solar panels let you refill the station during a long outage or out at the campsite. That's a big enough topic for its own part of the guide — see How Solar Charging Works.

Good to know
Charging while using it
Most power stations can power your devices while they are being charged — sometimes called pass-through charging. That's how they work as a battery backup that takes over when the power fails (Using It as a Battery Backup (UPS Mode)). Check your model's manual for any limits.
Watch out
Cold-weather charging
LiFePO4 batteries generally shouldn't be charged when they're below freezing. Many stations will simply refuse to charge until they warm up, and some have built-in battery heating. If yours lives in the garage or a cold car, bring it inside to warm up before charging, and check your manual's charging temperature range.
Why it helps
What this does for you
Knowing more than one way to refill the station means a long outage doesn't have to leave you empty-handed.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Day One with Your Power Station

The Phone App

Each of the big four brands has a free phone app for iPhone and Android: the Jackery app, the EcoFlow app, the Anker app (used for Anker SOLIX power stations), and the BLUETTI app. You don't need the app to use a power station — the buttons work fine — but it adds some genuinely useful features.

What the app is good for

  • Seeing the battery level and time remaining from another room — or, over Wi-Fi, from anywhere.
  • Switching outlets on and off without getting up.
  • Choosing a quieter, slower charging mode, or setting a charging limit to protect the battery.
  • Installing firmware updates — improvements and fixes for the station's built-in software.
  • Getting a notification on your phone when the power goes out, if the station is plugged in as a backup.

Connecting the app, step by step

  1. Install the maker's app from the App Store (iPhone) or Google Play (Android). Check that the developer name is the brand itself.
  2. Open the app and create an account with your email address and a password. Write the password down somewhere safe.
  3. Turn on your phone's Bluetooth, and stand near the power station.
  4. Turn the station on. Some models need you to press a button or a button combination to start pairing; the app will show you which.
  5. In the app, tap the option to add a device (often a + sign). Choose your station when it appears.
  6. When asked, choose your home Wi-Fi network and type its password, if you want to check the station from away from home. You can skip this and use Bluetooth only.
  7. Let the app check for a firmware update and install it while the station is plugged in.

Checked against Jackery, Anker SOLIX and BLUETTI support on November 13, 2026.

Good to know
Bluetooth first, and 2.4 GHz Wi-Fi
Jackery and Anker both say the first connection is made over Bluetooth, and then you can add Wi-Fi. Many stations, including Jackery's, connect only to a 2.4 GHz Wi-Fi network, not 5 GHz. If your router uses one name for both, it usually works anyway; if setup fails, that's one of the first things to check. On some Jackery models, Wi-Fi and Bluetooth turn back off if the app doesn't connect within a few minutes — just start pairing again.

Checked against Jackery Support on November 13, 2026.

Tip
If it won't connect
Move closer to the station, turn your phone's Bluetooth off and back on, and close and reopen the app. Make sure no other phone is connected to the station at the same time. Most models also have a way to reset their Wi-Fi and Bluetooth pairing; your manual shows the button to hold.
Scam alert
Only the maker's app
Download the app only from the official App Store or Google Play listing, published by the brand itself. Never install an app from a link in a text message or an ad, and never give your app password to someone who calls offering "support."
Why it helps
What this does for you
With the app set up, a quick look at your phone tells you whether the station is full and ready — even while you're away visiting family.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Solar Panels

How Solar Charging Works

Portable solar panels fold up like a briefcase and open to face the sun. A cable runs from the panels to the power station, which stores the energy. No installer, no roof work, no wiring into the house — just unfold, aim and plug in.

The number on the panel

Panels are sold by their watts — 100 W, 200 W, 400 W and so on. That number is what the panel produces in ideal, laboratory-bright sun. In everyday conditions you'll usually get noticeably less. Clouds, haze, a low winter sun, shade on even part of the panel, and heat all cut the output.

A realistic estimate

  1. Take the panel's rated watts. Say 200 W.
  2. Assume you'll get a good deal less in practice — on a decent day, perhaps half to three-quarters of it. Call it about 120 W.
  3. Multiply by the hours of good, direct sun. In Northeast Ohio, a clear summer day gives more good hours than a gray December one. Say 4 hours.
  4. 120 × 4 = about 480 Wh in a day — roughly half of a 1,000 Wh station.
Good to know
The screen tells the truth
The station's input watts number shows exactly what the panels are delivering right now. Move the panel a little and watch it change. It's the easiest way to learn the best spot in your yard.
Watch out
Ohio winters
In a winter outage, short days and gray skies can mean very little solar charging. Panels are a big help in spring, summer and fall, but don't count on them alone in January.
Why it helps
What this does for you
With panels, an outage that lasts for days doesn't mean an empty battery. On a sunny day, you can refill and keep going.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Solar Panels

Choosing Panels That Fit

The simplest choice is to buy panels from the same brand as your power station, in a size the maker lists as compatible. Then the plugs match and the numbers are already checked for you. If you want to use another brand's panels, there are three things to check.

1. The voltage must be in range

Every power station lists a solar input range in volts on its spec sheet, such as "12–60V." Every panel lists its open-circuit voltage, written Voc. The panel's Voc — or the total Voc if you connect panels together in a chain — must be inside the station's range. Too high can stop charging or damage the station.

2. The current must be in range

The station also lists the most current (amps) its solar input accepts. The panel's current rating should not exceed it. Your manual lists both numbers.

3. The plug must fit

Most stand-alone panels end in a pair of MC4 connectors (chunky, clicking plugs used across the solar world). Many power stations have a different port, so you'll need the maker's MC4 adapter cable. Jackery stations use a round DC8020 solar input on many models; others use an XT60 or similar port. The manual shows which yours has.

Good to know
What Jackery says about other panels
Jackery says third-party panels can be used as long as the panel's voltage and current fall within the station's DC input range — and that it can't guarantee compatibility with other brands. Connecting a panel whose voltage exceeds the input limit may stop charging or damage the product. The other makers give similar advice in their manuals.

Checked against Jackery Help Center on November 13, 2026.

More panels, faster charging — up to a limit

A station's spec sheet lists its maximum solar input in watts. Adding panels beyond that number won't charge it any faster. Some larger stations have two solar inputs. When in doubt, match the maker's recommended bundle.

Tip
Write the numbers on the Cheat-Sheet
Copy your station's solar input range (volts), its maximum current (amps) and its maximum solar watts onto the Cheat-Sheet in Your Power Station Cheat-Sheet. Then you can check any panel in seconds.
Why it helps
What this does for you
Three quick checks keep you from buying panels that won't plug in, won't charge, or worse, could damage an expensive power station.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Solar Panels

Setting Up Panels Outdoors

Portable panels are meant to be set up and taken down by hand. Here's a calm, safe routine.

Step by step

  1. Pick a spot with full sun for as many hours as possible, away from trees and the shadow of the house. In our part of the country, panels facing roughly south do best.
  2. Unfold the panel and open its kickstand, or lean it against something sturdy. Tilt it so it faces the sun as squarely as you can.
  3. Keep the power station indoors or in the shade, out of rain and direct sun. Run the cable to it; many people pass it through a slightly opened window or door.
  4. Connect the panel's cable to the adapter (if needed), then to the station's solar input.
  5. Check the screen: you should see input watts above zero. If not, check the connections and the voltage range from Choosing Panels That Fit.
  6. Every couple of hours, turn the panel to follow the sun if you're able. It makes a noticeable difference.
  7. Before dark or before bad weather, unplug the cable at the station first, then fold the panel and bring it in.
Watch out
Weather and wind
Many portable panels are water-resistant but not built to sit out in storms, and their light frames can catch the wind like a sail. Bring them in when weather turns, and never leave connectors lying in puddles.
Safety
Trip hazards and a tight window
A cable across a walkway is easy to trip over in the dark. Route it along the wall, and don't pinch it hard in a window or door — that can damage the cable over time.
Tip
Keep the panels clean
Dust, pollen and bird droppings cut output. Wipe the panel gently with a soft, damp cloth — no harsh cleaners or scrubbers.
Why it helps
What this does for you
A few minutes of setup each morning can refill a good part of your battery on a sunny day, quietly and for free.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Using It in an Outage

Your Outage Plan with a Power Station

The time to plan for an outage is on a calm, sunny afternoon. Here's a simple plan you can write down once and follow when the lights go out.

Before an outage

  1. Keep the station charged to at least 80 percent during storm seasons, and check it every few months the rest of the year (Storage and Long-Term Care).
  2. Decide where it will sit during an outage: a central spot on a hard floor, near the router and your phone chargers.
  3. Keep the cords you'll need in a bag with it: phone cables, a short heavy-duty extension cord, and the station's own charging cables.
  4. Write your priority list on the Cheat-Sheet (Your Power Station Cheat-Sheet): what gets plugged in first, second and third.
  5. Show one other person in the household how to turn it on and press the AC button.

When the power goes out

  1. Stay calm and get a flashlight. Many stations have a built-in light you can turn on right away.
  2. Turn the station on. Plug in your first priority — often the modem and router, or a CPAP at bedtime.
  3. Charge phones from the USB ports.
  4. Check the output watts and the time remaining on the screen. Adjust: unplug what you don't need right now.
  5. Report the outage to your electric company, by phone, text or app, and check its outage map for an estimated restoration time.
  6. Every few hours, check the battery percent and decide what to keep running.

After the power comes back

  • Plug the station back into the wall and let it recharge to full.
  • Note what worked and what you wished you had, and add it to the plan.
Tip
Stretch the battery
Run the most important things, and only when needed. Switch off the AC outlets when you're only charging phones by USB. Turn off the TV when nobody's watching. Small habits can add hours.
Why it helps
What this does for you
A written plan means you aren't trying to remember what to do in the dark, and a family member can help even if you're not home.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Using It in an Outage

Keeping Wi-Fi and Phones Going

For many households, staying connected is the most important thing during an outage: hearing from family, checking the news, calling for help. A power station handles this job beautifully.

Keep the internet on

  1. Find your modem (the box the internet cable plugs into) and your router (the box that makes Wi-Fi; sometimes it's the same box).
  2. Unplug their power cords from the wall or surge protector, and plug them into the power station's AC outlets. If either one uses a small brick that plugs into USB, you can use the USB ports instead.
  3. If you have fiber internet, there may also be a small box on the wall called an ONT that needs power. Plug it in too.
  4. Wait a few minutes for the lights to settle. Check that your phone shows Wi-Fi.
Good to know
The internet may be down anyway
If the outage is widespread, your internet provider's equipment in the neighborhood may also lose power. Powering your own modem only helps if the service outside is still running. Your cell phone's data may still work in that case.

Keep phones charged

  • Use the station's USB ports and your phone's own cable.
  • Turn on your phone's Low Power Mode (iPhone) or Battery Saver (Android) to make each charge last longer.
  • Charge everyone's phones early, while the battery is full, rather than waiting until they're nearly empty.

A cordless home phone

If you have a home phone through your cable or fiber company, it depends on that equipment having power. Powering the modem (and the cordless phone base) from the station can keep it working — as long as the service outside is up. Our Surge Protectors & Battery Backups guide covers home phones and 911 in an outage in more detail.

Why it helps
What this does for you
A modem, router and a few phones use very little power. Even a small station can keep you connected for many hours — often the single most reassuring thing it does.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Using It in an Outage

CPAP, Oxygen and Medical Equipment

Many people buy a power station for a CPAP or other plug-in medical device. It can be a real comfort. But medical equipment deserves extra care, and your equipment supplier and doctor should be part of the plan.

Safety
Life-support equipment needs a full plan
If you depend on an oxygen concentrator, a ventilator, or other equipment you can't safely go without, a power station should be only one layer of your backup plan. Ask your equipment supplier what backup they recommend (many supply oxygen cylinders for outages), ask your doctor what to do in a long outage, and tell your electric company that someone in the home relies on medical equipment. In an emergency, call 911.

Running a CPAP from a power station

  1. Check your CPAP's manual, or call your equipment supplier, and ask whether the maker approves running it from a battery or power station, and whether there's an official DC cable or converter for your model.
  2. Test it on a normal night first. Charge the station fully, run the CPAP from it all night, and see how much battery is left in the morning.
  3. For the longest runtime, turn off the heated humidifier and heated tubing when running on battery. CPAP retailers and makers say the humidifier is by far the biggest power user.
  4. If the maker offers a DC converter, it can run the CPAP from the station's DC outlet without converting to household power and back, which usually stretches the battery further.
  5. Write down what you learned: how many percent a night used, with and without the humidifier.
Watch out
Use only the maker's adapters
Use only the CPAP maker's own DC cable or converter for your exact model. Adapters from other machines or unknown sellers can have the wrong voltage or connector.

Other plug-in devices

  • Power wheelchairs and scooters: ask the maker whether charging from a power station is approved.
  • Refrigerated medicines like insulin: a power station can run a small refrigerator for a while (Refrigerators and Freezers). Ask your pharmacist how long your medicine can safely stay out of the refrigerator.
  • Hearing aids, phones and medical alert systems: easy jobs for the USB ports.
Why it helps
What this does for you
Testing your CPAP on a calm night turns "I hope it works" into "I know it works, and for how long" — the best kind of peace of mind.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Using It in an Outage

Refrigerators and Freezers

Keeping food cold is one of the most common reasons people buy a bigger power station. It can be done, but it takes a station that's big enough, and a bit of planning.

Why refrigerators are tricky

  • The compressor needs a start-up surge several times its running watts. The station's surge rating must handle it.
  • A refrigerator cycles on and off all day, so its average use is much lower than its running watts.
  • Older refrigerators often use much more energy than newer ones.

Estimating with the EnergyGuide label

  1. Find the refrigerator's yearly energy use in kWh per year on its yellow EnergyGuide label or in the manual. Say it's 600 kWh.
  2. Divide by 365 to get a day: 600 ÷ 365 = about 1.6 kWh, or 1,600 Wh a day.
  3. Compare to your station. A 2,000 Wh station might run that refrigerator for roughly a day, less the conversion losses from The Runtime Math, Step by Step. A 1,000 Wh station, perhaps half a day.
  4. Real use will vary: a full refrigerator in a cool kitchen with the door kept closed uses less.
Tip
Run it in shifts
Food stays cold for a while in a closed refrigerator. Many people run the refrigerator from the station for an hour or two at a time, a few times a day, rather than all day. Keep the door closed as much as possible and use a refrigerator thermometer.
Good to know
When in doubt, throw it out
Keep a simple thermometer in the refrigerator and the freezer. Food safety guidance from the U.S. Department of Agriculture (at foodsafety.gov) explains how long food stays safe without power and what to throw out. Look it up on a calm day and jot the key points on the Cheat-Sheet, so you're not guessing during an outage.
Why it helps
What this does for you
A little arithmetic tells you whether your station can save the groceries, and how to stretch it if it's close.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Using It in an Outage

Using It as a Battery Backup (UPS Mode)

Many power stations can stay plugged into the wall with your devices plugged into them. When the power fails, the station takes over automatically. Makers call this UPS mode (uninterruptible power supply) or EPS (emergency power supply).

Setting it up

  1. Plug the station into the wall and let it charge fully.
  2. Plug your devices — the modem and router, for example — into the station's outlets, and turn the AC outlets on.
  3. In the app, look for a UPS or backup setting. Some models let you set a backup reserve, a percentage the station keeps in reserve for outages.
  4. Test it: with everything running, switch off the wall outlet or unplug the station's charging cord. Your devices should keep going. Plug it back in.

Switchover time, in plain words

When the power fails, the station needs a split second to take over. Makers list this switchover time in milliseconds (ms) — thousandths of a second. For example, Jackery lists 20 milliseconds or less for the Explorer 1000 v2. Routers, lamps, phone chargers and refrigerators don't notice a gap that short. A desktop computer usually doesn't either, but not always.

Checked against Jackery product page on November 13, 2026.

Watch out
Not a substitute for a true UPS on some equipment
For a desktop computer that must never blink, a dedicated computer battery backup (covered in our Surge Protectors & Battery Backups guide) is built for that job. For life-support medical equipment, follow the supplier's backup plan, not a consumer power station's UPS mode.
Tip
Keep the battery happy
If the station lives on the charger all year as a backup, see whether the app offers a charge limit (for example, stop at 80 or 90 percent) or a battery-care setting. Check the maker's advice for your model.
Why it helps
What this does for you
With UPS mode, your Wi-Fi and phone base stay on through a blink or a long outage without you lifting a finger — even in the middle of the night.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Using It in an Outage

Home Backup Kits and Transfer Switches

The biggest power stations can power parts of your house directly — the furnace blower, the refrigerator, a well pump, the lights in certain rooms — through a transfer switch or a home backup panel. Examples include the EcoFlow Smart Home Panel, the Jackery Smart Transfer Switch, and the Anker SOLIX Home Power Panel. These can work very well. They must be installed by a licensed electrician.

Safety
Never connect backup power to your home's wiring yourself
Never plug a power station or generator into a wall outlet to "feed" the house, and never use a cord with plugs on both ends (sometimes called a "suicide cord"). This is called backfeeding. It can start a fire, damage the station, and send electricity back out onto the power lines, where it can kill a utility lineworker. Connecting backup power to your home is a job for a licensed electrician, with a proper transfer switch, and often a permit and inspection. This guide gives no wiring steps on purpose.

Checked against EcoFlow Smart Home Panel installation manual on November 13, 2026.

What a transfer switch does, in plain words

A transfer switch is a device installed next to your electrical panel. It safely disconnects the chosen circuits from the power company's lines before connecting them to your backup power, so the two can never mix. EcoFlow's own installation manual, for example, says its home panel must be installed by a licensed electrician and verified by your local building authority.

How to get one, the right way

  1. Make your list of the circuits you'd most want backed up (Make Your "Must Keep Running" List and What It Can and Can't Run will help).
  2. Check which home-backup accessories your power station maker sells for your model.
  3. Call a licensed electrician. Ask for a written quote including the transfer switch or panel, labor, the permit and the inspection.
  4. Ask the electrician to label everything clearly and to show you, step by step, how to switch over in an outage.
  5. Write those switch-over steps on the Cheat-Sheet in Your Power Station Cheat-Sheet.
From Bill
Where I can help, and where I can't
I'm a technology helper, not an electrician. I'm glad to help you figure out what you want backed up, set up the power station and its app, and practice the switch-over steps your electrician leaves you. The wiring itself always belongs to a licensed electrician.
Why it helps
What this does for you
Done properly, a home backup kit lets you run the furnace blower or the well pump in an outage without dragging cords through the house — safely, and without putting anyone on the power lines at risk.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Care & Scams

Safe Use Indoors

One of the best things about a power station is that it's safe to use inside — no fumes, no fuel. Like anything with a big lithium battery, though, it deserves a little respect.

Good habits

  • Use and charge it on a hard, flat surface: a floor, table or counter. Not on a bed, couch or carpet where the vents can be blocked.
  • Keep a few inches clear around the vents. The fan may run while charging or under heavy use; that's normal.
  • Keep it away from water, sinks, and rain, and away from heaters, stoves and direct hot sun.
  • Keep children's hands and pets' paws away from the outlets.
  • Don't stack things on top of it or cover it with a blanket.

Extension cords and power strips

  • If you need a cord, use a heavy-duty, grounded extension cord that's no longer than you need.
  • Don't run cords under rugs or through doorways where they'll be pinched.
  • Don't plug power strips into power strips. Our Surge Protectors & Battery Backups guide explains why.
  • Remember the station's output limit (watts). A power strip doesn't add any power — it just adds outlets.
Safety
Stop and unplug if you notice this
If a power station swells, smells of burning or chemicals, gets unusually hot, hisses, or makes popping sounds, stop using it. Unplug it if you can do so safely, move people and pets away, and call 911 if there is smoke or fire. With a fire, don't try to be a hero — get everyone out and let the fire department handle it.
Good to know
Carbon monoxide isn't a power-station problem
Because there's no engine, a power station gives off no carbon monoxide. That's exactly why it's the right choice for indoor backup power. Gas generators are a very different story: they belong outdoors, far from the house.
Why it helps
What this does for you
A few simple habits let you keep the station right where you need it — next to the bed for a CPAP, or by the router — with confidence.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Care & Scams

Storage and Long-Term Care

A power station that sits forgotten in a closet for a year may be nearly empty — or worse, worn down — on the day you need it. A tiny bit of care keeps it ready for years.

What Jackery recommends, as an example

HabitGuideline
Charge level for storageAbout 50 to 80 percent. Never store it empty.
How often to checkAbout every 3 months: top it up if it has dropped.
WhereA cool, dry place, roughly 32°F to 104°F (0°C to 40°C), out of direct sun.
Unplug accessoriesDisconnect solar panels and devices so they don't slowly drain it.

Checked against Jackery Support on November 13, 2026.

Other brands give similar advice; your manual has the exact numbers for your model. The common thread is simple: don't let it sit empty, don't let it bake or freeze, and check on it now and then.

A four-times-a-year routine

  1. Put a reminder on your calendar or phone for the first of January, April, July and October.
  2. On that day, turn the station on and check the percent.
  3. If it's low, charge it. If storm season is coming, charge it to full.
  4. Open the app (if you use it) and install any firmware update.
  5. Plug in a lamp for a minute to make sure the AC outlets work.
Watch out
Garages and cars get too hot and too cold
Ohio garages can go well below freezing in winter and well above 100°F in a summer car. Neither is good for a big battery. Inside the house — a closet, a basement shelf — is a better home.
Tip
Keep the kit together
Store the cords, the car cable, the solar adapter, and a printed copy of the Cheat-Sheet in one bag next to the station. In the dark, you'll be glad everything is in one place.
Why it helps
What this does for you
Five minutes four times a year means your station is full and healthy when the storm comes — and it lasts years longer.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Care & Scams

Recalls, Damage and Recycling

Check for recalls

Now and then a power station or a battery product is recalled for a safety problem. For example, in August 2026 the U.S. Consumer Product Safety Commission (CPSC) announced a recall of Goal Zero YETI 3000X power stations because a circuit board can overheat, posing fire and burn hazards. Recalls are rare, but they're worth checking.

  1. Find your station's exact model name and serial number on the label (often on the bottom or back).
  2. Go to cpsc.gov/Recalls and search for the brand.
  3. Read any recall carefully to see whether your model and serial numbers are included.
  4. If yours is recalled, stop using it and follow the remedy in the notice: usually a free repair, replacement or refund from the maker.
  5. Register your product with the maker (often in the app or on its website) so they can contact you directly.

Checked against CPSC on November 13, 2026.

If it's damaged

If a station has been dropped hard, crushed, soaked, or shows any of the warning signs in Safe Use Indoors, stop using it. Contact the maker's support for instructions before you do anything else with it.

Recycling an old power station

Lithium batteries must never go in your household trash or curbside recycling bin. They can start fires in garbage trucks and recycling centers.

  1. Contact the maker first. Some brands run recycling or trade-in programs.
  2. Or take it to a household hazardous waste collection site or an electronics recycler. Your county's solid-waste district can tell you where and when.
  3. Use the locators at call2recycle.org or earth911.com, which the EPA lists as resources. Call ahead: many drop-off spots only take smaller batteries, so ask whether they accept a large power station.
  4. Before you drop it off, cover any exposed terminals with tape, and keep it in a dry place.

Checked against U.S. EPA on November 13, 2026.

Why it helps
What this does for you
A quick recall check protects your home, and proper recycling keeps a big battery from becoming somebody else's fire.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Care & Scams

Travel: Cars, Camping and Airplanes

In the car

  • Secure the station so it can't slide or fly forward in a sudden stop — on the floor behind a seat, or strapped in the trunk.
  • Don't leave it in a closed car on a hot summer day or a bitter winter night for long.
  • You can charge it from the car while driving (Charging It: Wall, Car, and More).

Camping and the RV

  • A power station runs lights, fans, phone chargers, a CPAP, and a small cooler quietly — a welcome change from a generator at a campground.
  • Keep it in the shade, and out of rain and morning dew.
  • Pair it with portable solar panels for longer trips (How Solar Charging Works).

Airplanes: leave it at home

The Federal Aviation Administration (FAA) allows lithium-ion batteries up to 100 Wh on passenger planes, allows 101 to 160 Wh only with the airline's approval, and forbids batteries larger than 160 Wh. Almost every portable power station is far larger than that, so it can't go in your carry-on or checked bag. Airlines can have even stricter rules for power banks.

Checked against FAA PackSafe on November 13, 2026.

Tip
Flying somewhere and need power?
Bring a small, airline-friendly power bank for your phone in your carry-on, and check your airline's current rules before you fly. If you need a power station at your destination, ship it by ground or rent or buy one there.
Why it helps
What this does for you
Knowing the rules saves you a surprise at the airport and keeps the station safe on the road.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Care & Scams

Scams and Fake Deals

Power stations are popular and expensive, which makes them a favorite of scammers. The most common trick is a fake online store with an unbelievable price.

Scam alert
The "90 percent off" power station
You see an ad on Facebook, Instagram, TikTok or in a search result: a big-name power station for a fraction of its price — "clearance," "warehouse closing," "only today." The website looks real and may copy the brand's logo and photos. You pay, and either nothing arrives, or something cheap and useless does. Your card details may be stolen too. If a deal on a $1,000 power station looks too good to be true, it is.

How to check a deal before you buy

  1. Type the brand's web address yourself (for example, jackery.com, ecoflow.com, ankersolix.com or bluettipower.com) instead of clicking the ad, and compare the price.
  2. Or buy from a store you already know: a big-box store, a hardware store, or a well-known online retailer.
  3. Search the website's name with the words scam or reviews.
  4. Be suspicious if the site only takes payment by wire transfer, Zelle, gift cards, or cryptocurrency, or says credit cards are "temporarily unavailable."
  5. Pay with a credit card, which gives you the strongest right to dispute a charge.
Scam alert
Other tricks to know
Watch out for fake "giveaway" posts asking you to pay shipping for a free power station; phone calls or texts claiming to be the maker's support and asking for your account password or a payment; and door-to-door sellers after a storm pressuring you to buy a "home battery system" on the spot. Real companies won't rush you.
Tip
If you already paid
Call your card company or bank right away, using the number on the back of your card, and ask about disputing the charge. Report the site at reportfraud.ftc.gov. Be wary of anyone who then contacts you offering to recover your money for a fee — that's often a second scam. Our I Think I've Been Scammed guide walks through the next steps.
Why it helps
What this does for you
Thirty seconds of checking protects hundreds of dollars — and gets you a real power station with a real warranty.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When to Call Bill & Your Cheat-Sheet

When to Call Bill

I've written this guide so you can choose, set up and live with a power station on your own. But part of being helpful is being honest about when a hand saves time, worry or money. Here's my straight advice, with no pressure.

Times it's well worth a call

What I don't do

I don't do electrical wiring. Transfer switches, home backup panels, and anything inside your electrical panel belong to a licensed electrician (Home Backup Kits and Transfer Switches). I'm happy to help you prepare questions for the electrician and to set up the technology side afterward.

What working with me is like

I work at your pace — no rushing, no talking down, no jargon. I explain what I'm doing in plain words, and I'll always tell you honestly when something isn't worth the money. Home visits are here in Portage County, Ohio; remote help reaches you wherever you are. I've been doing this work for more than 30 years.

From Bill
How to reach me
Call (330) 200-8042, or book a time at billshometech.com/book. My help is $49 remote · $99 in your home. This guide is free to read and share with family and neighbors.
Good to know
You may be greeted by Sophie
When you call or visit billshometech.com, you might first meet Sophie, my AI receptionist. She can answer quick questions and help you book a time. The actual help always comes from me.

Thank you for taking the time to get ready before the next storm. A little preparation goes a long way, and you don't have to figure it all out alone.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When to Call Bill & Your Cheat-Sheet

Your Power Station Cheat-Sheet

Keep a copy of this with your power station, in the bag with its cords. The whole guide, boiled down.

The essentials

Remember
Wh (watt-hours)How long it runs. The size of the tank.
W (watts)How much at once. Stay under the station's output rating.
RuntimeWh ÷ watts in use, then take off about a fifth. A rough guide.
AC buttonMust be on for the household outlets to work.
StorageAbout 50–80 percent charged, cool and dry; check every 3 months.
SolarPanel Voc and current must be inside the station's input range.
IndoorsSafe to use inside. Hard surface, vents clear.
Home wiringOnly through a transfer switch installed by a licensed electrician. Never backfeed.
AirplanesOver 160 Wh: not allowed. Leave it home.

Write it down once

Keep handy
Brand and model____________________
Serial number____________________
Capacity (Wh) / output (W) / surge (W)______ / ______ / ______
Solar input: volts / amps / max watts______ / ______ / ______
Date of first full charge____________________
App account email____________________
Outage priority 1, 2, 3____________________
Watts of each (from the screen)____________________
CPAP: percent used per nightWith humidifier ______ Without ______
Electric company outage number____________________
Electrician (name and phone)____________________
Maker's support (phone or website)____________________

When something's wrong, in order

  1. Nothing comes out of the outlets: press the AC button so the household outlets turn on (Reading the Screen and the Buttons).
  2. It beeps and shuts off: you've plugged in too much. Unplug the biggest item and turn the AC outlets back on.
  3. It won't charge: check the cord at both ends, try another wall outlet, and make sure it isn't below freezing (Charging It: Wall, Car, and More).
  4. Solar shows zero input: check the connections, the sun on the panel, and the voltage range (Choosing Panels That Fit).
  5. The app won't connect: move closer, turn Bluetooth off and on, use 2.4 GHz Wi-Fi (The Phone App).
  6. It swells, smells, hisses or gets very hot: stop using it, move away, call 911 if there's smoke (Safe Use Indoors).
  7. Still stuck: call Bill at (330) 200-8042.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
Step 1 of 5
1