Bill's Home Tech
Netgear Nighthawk & Orbi — help from Bill

Netgear Nighthawk & Orbi Manual

What are you trying to do?

Type it in plain words — like "change my Wi-Fi password" or "is this Netgear call real?"

Quick guides for one question
This manual covers Netgear Nighthawk & Orbi from start to finish. These short guides each answer one question.
Keep it handy
Reading is free, with no sign-up. If you'd like, we can email you the link.
Bill's Home Tech · All manuals · (330) 200-8042 · Serving Portage County, Ohio
Prefer paper? Print this guide
All topics
Getting Started

A Note from Bill

Hello, and welcome. I'm Bill, and for more than 30 years I've helped people make technology behave. Here in Portage County, Netgear equipment turns up in a lot of homes. Some people bought a Nighthawk router at the store to replace the one the internet company rented them. Others have an Orbi system, with a main unit and one or two matching "satellites" that spread Wi-Fi through the whole house. Either way, it's the box that every phone, tablet, TV and computer in your home depends on.

That makes it worth understanding, even a little. When you know which app runs it, which password is which, and what Netgear's subscription offers really are, you stop feeling at the mercy of a blinking box.

Why it helps
What this guide does for you
It explains your Netgear router or Orbi mesh system in plain English, then walks you slowly through the jobs that matter: changing the Wi-Fi password, setting up guest Wi-Fi, pausing a device, installing updates, deciding whether you need Netgear Armor or Smart Parental Controls (and canceling them if you don't), knowing when an older model is too old to keep, and spotting the fake "Netgear support" scams that target router owners.

Who this guide is for

  • Anyone who owns a Netgear Nighthawk router or an Orbi mesh system, new or old.
  • Anyone who was just charged for "Netgear Armor" and wants to know what it is.
  • Family members who set up Wi-Fi for a parent and want clear steps to leave behind.
  • Anyone shopping for new Wi-Fi equipment who's considering Netgear.

The big promise: you can't break it

Almost everything in the Nighthawk and Orbi apps can be changed back. Looking around the app, checking which devices are connected, turning guest Wi-Fi on and off, and running a speed test are all safe. Two things deserve a slower hand, and this guide flags them clearly: changing your Wi-Fi password (every device has to be reconnected) and a factory reset (it erases all your settings). Neither harms the equipment, but both take some time to recover from.

You're never stuck alone

Take this at your own pace and in any order. And if you get stuck, call or text me at (330) 200-8042. Sometimes ten minutes with someone beside you is all it takes.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Ways Your Netgear Can Make Life Easier

Your Netgear router or Orbi system can do a few helpful things that most owners never switch on. Here are three: checking on your home Wi-Fi while you're away, guest Wi-Fi that turns itself off, and a safety net for the admin password. Each takes about five minutes.

Anywhere Access — check on home Wi-Fi from away

Why it helps
Why it's worth five minutes
On a trip, or visiting family, you can open the Nighthawk or Orbi app and see whether your home network is online and which devices are connected, such as the doorbell camera or a smart thermostat. You can also change settings like guest Wi-Fi for a house sitter without being there.
  1. At home, open the Nighthawk or Orbi app and sign in with your NETGEAR account.
  2. Open the Menu, then Settings > Anywhere Access.
  3. Make sure Anywhere Access is turned on. Netgear turns it on by default.
  4. When you're away, open the app. If it asks, tap CONNECT VIA ANYWHERE ACCESS.
  5. Check your network and devices as you would at home.
Tip
Good to know
Free, built into the apps. Netgear says it uses a secure connection through the Netgear cloud that doesn't open any ports on your router, and you must sign in with your NETGEAR account, so turn on two-step sign-in for that account. It replaces the older Remote Management feature, which Netgear is removing from most routers. A restart still needs someone at home to unplug the boxes.

Checked against NETGEAR Support (How do I enable or disable Anywhere Access on my NETGEAR Orbi or Nighthawk router?; Remote Management is now Anywhere Access) on November 15, 2026.

Guest Wi-Fi that turns itself off

Why it helps
Why it's worth five minutes
When the grandkids visit for a weekend, or a contractor needs the internet for an afternoon, you can give them guest Wi-Fi with a time window. When the time is up, the guest network goes away on its own, and you don't have to remember to turn it off.
  1. Open the Nighthawk app and tap the Guest WiFi tile.
  2. Choose the band (2.4 GHz reaches farthest).
  3. Turn on the Guest WiFi Enabled slider.
  4. Type a guest network name and a password that's easy to read aloud.
  5. Set the optional time window for how long guest Wi-Fi should stay on, then save.
  6. Share the name and password with your visitor.
Tip
Good to know
Free. These steps are from Netgear's Nighthawk app article. Orbi owners can turn guest Wi-Fi on in the Orbi app or at orbilogin.com under Guest Network; a time window may not be offered there, so turn it off by hand when your guests leave.

Checked against NETGEAR Support (How do I set up guest WiFi using the Nighthawk app?; How do I set up a guest network on my Orbi WiFi System?) on November 15, 2026.

A safety net for the admin password

Why it helps
Why it's worth five minutes
Forgetting the router's admin password usually means a factory reset, which erases your Wi-Fi settings and makes every device in the house reconnect. Turning on password recovery lets you get back in by answering two security questions instead.
  1. On a computer connected to your Netgear Wi-Fi, go to routerlogin.net (Nighthawk) or orbilogin.com (Orbi) and sign in as admin.
  2. Select Advanced > Administration > Set Password.
  3. Check the Enable Password Recovery box. (Some older models call it Enable Password Reset.)
  4. Choose two security questions and type answers you'll remember.
  5. Click Apply. Write the router's serial number from its label somewhere safe; recovery asks for it.
Tip
Good to know
Free. If you forget the password later, enter it wrong three times and the router offers the recovery screen: type the serial number and answer the questions. Netgear says recovery doesn't work in the Safari browser, so use Chrome or Firefox.

Checked against NETGEAR Support (How do I enable the admin password recovery feature on my NETGEAR router?; How to reset your NETGEAR router admin password) on November 15, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Nighthawk or Orbi: Which Do You Have?

Netgear sells two families of home Wi-Fi equipment, and each one has its own app. The first job is figuring out which family yours belongs to.

Nighthawk: one router

Nighthawk is Netgear's name for its single-box routers. They're usually black, often with antennas or a tall, angular shape. One Nighthawk router does the whole job from one spot. Netgear also uses the Nighthawk name on some mobile hotspots, cable modems and range extenders, and many of those are managed in the same Nighthawk app.

Orbi: a mesh system

Orbi is Netgear's mesh Wi-Fi. You get a main router plus one or more satellites that look almost identical. The router connects to your modem; the satellites sit around the house and pass the Wi-Fi along, so you get one network name that works in every room. Orbi units are usually white or gray towers.

How to tell for sure

  1. Look at the front or top of the box for the word Nighthawk or Orbi.
  2. Turn it around or tip it up and find the label. It shows the model number (for example RS300, RBR750 or RBE970), the serial number, and the Wi-Fi name and password it came with.
  3. Write the model number in the "Keep this handy" table at the end of this guide (see Your Netgear Cheat-Sheet).

Netgear's current lineup

FamilyCurrent models (Wi-Fi 7)What it suits
Nighthawk routerRS300, RS700S and othersSmaller homes or apartments; one central spot
Orbi 370 seriesDual-band meshAverage homes on a budget
Orbi 770 seriesTri-band meshLarger homes, many devices
Orbi 870 / 970 seriesTri- and quad-band meshBig homes and very fast fiber plans

Checked against netgear.com product pages (Nighthawk RS300, RS700S; Orbi 370, 770, 870, 970 series) on November 15, 2026.

Good to know
What it costs, roughly
As of November 2026, Netgear's own store listed an Orbi 370 set with one router and two satellites at about $290 on sale, an Orbi 770 three-pack at about $570 on sale, and the Nighthawk RS700S at about $600. The top Orbi 970 systems run well over $1,000. Prices and sales change often, so treat these as a rough guide.
Tip
Orbi Pro is different
If your label says Orbi Pro, that's Netgear's small-business line. It's managed with Netgear's Insight app rather than the regular Orbi app, so some steps in this guide won't match.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Modem, Router, Satellites: How It Fits Together

Home internet usually involves two or three boxes, and it helps to know which one does what. When something goes wrong, this is how you'll know which box to look at.

BoxWhat it does
Modem (or fiber box)Brings the internet into the house from Spectrum, AT&T or whoever your provider is. Often rented from them.
RouterYour Nighthawk, or the Orbi router. Creates your Wi-Fi network and hands the internet to every device.
Orbi satelliteRepeats the Orbi Wi-Fi farther away from the router. Same network name, same password.
Your devicesPhones, tablets, TVs, computers, doorbells, printers. They connect to the Wi-Fi.

The cable that matters most

An Ethernet cable runs from your modem to the Internet port on your Nighthawk or Orbi router. That port is usually a different color or labeled clearly. If that cable comes loose, every device in the house loses the internet even though the Wi-Fi name still shows up.

Some boxes do both jobs

A few Netgear models are a modem and router in one, such as Netgear's cable Orbi and cable Nighthawk models. If yours plugs straight into the round cable-TV wire on the wall, it's one of these. Internet providers' own gateways often combine both jobs too.

Watch out
Two routers can fight
If your internet company's box also makes Wi-Fi and you added a Netgear router behind it, you may have two Wi-Fi networks and devices bouncing between them. That setup can work, but it's a common cause of "the Wi-Fi keeps dropping." It's a good job for a second pair of eyes.
Tip
Bought your own equipment?
If you're thinking about returning your provider's rented gear and using your own Netgear modem or router, Bill's guide Buying Your Own Modem & Router covers the money side and which providers allow it.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Three Different Passwords

This is the single most confusing thing about Netgear equipment, so let's settle it once. There are three separate passwords, and they do three different jobs. Netgear says so itself.

PasswordWhat it's for
Wi-Fi passwordWhat you type on a phone, tablet or TV to join your Wi-Fi. Guests need this one (or the guest one).
Admin passwordOpens the router's own settings, in the app or at routerlogin.net or orbilogin.com. The username is usually admin.
NETGEAR account passwordYour online account with Netgear (your email address plus a password). The apps ask for it, and it holds your registration and subscriptions.

Checked against NETGEAR Support (Admin, WiFi network, and MyNETGEAR credential differences) on November 15, 2026.

Where each one comes from

  • Wi-Fi: printed on the router's label at first; you probably changed it during setup.
  • Admin: set during setup in the app. On older routers the factory default was username admin and password password, which should never be left that way.
  • NETGEAR account: created when you first opened the Nighthawk or Orbi app.
Tip
Write all three down
Use the "Keep this handy" table in Your Netgear Cheat-Sheet, or your password manager. Most calls I get about locked-out routers come down to not knowing which password is being asked for.
Safety
Never share the admin password
Guests need the Wi-Fi password, and nobody else needs the admin password. A real Netgear agent will never ask for your NETGEAR account password over the phone.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

The Nighthawk and Orbi Apps

Netgear runs its home Wi-Fi through two free phone apps. Use the one that matches your equipment: the Nighthawk app for Nighthawk routers (and most Netgear extenders and hotspots), the Orbi app for Orbi mesh systems. They look and work much alike.

What the apps do for you

  • Set up a new router or Orbi system step by step.
  • Show and change your Wi-Fi name and password.
  • List every device connected to your Wi-Fi, and pause any of them.
  • Turn on guest Wi-Fi and share it.
  • Run an internet speed test.
  • Check for and install firmware updates.
  • Sell and manage Netgear's subscriptions: Armor and Smart Parental Controls.

Getting the app

  1. On an iPhone or iPad, open the App Store. On Android, open the Google Play Store.
  2. Search for Netgear Nighthawk or Netgear Orbi.
  3. Check that the developer listed is NETGEAR before you tap Get or Install.
  4. Open the app and sign in with your NETGEAR account, or tap Create Account if you don't have one.

Checked against NETGEAR Support (Set up an Orbi WiFi System; Nighthawk app sign-in steps) on November 15, 2026.

Good to know
Yes, the apps want an account
Netgear's setup steps have you create a NETGEAR account before you can set up an Orbi, and the Nighthawk app asks you to sign in too. The account is used for product registration, security updates and warranty. It is separate from the router's admin password (see Three Different Passwords).
Watch out
Lookalike apps
App stores carry "router helper" apps from other companies that use Netgear's name. They aren't needed and some push paid support. Stick to the apps published by NETGEAR.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Your NETGEAR Account and Two-Step Sign-In

Your NETGEAR account ties together your equipment, its registration and warranty, and any subscriptions you pay for. Protecting it protects your home network, because the apps can change router settings from anywhere.

Turn on two-step sign-in

Netgear accounts support two-factor authentication (2FA): after your password, you also enter a code. Once it's on, you can mark your own phone as a trusted device so it doesn't ask for a code every single time.

  1. Open the Nighthawk or Orbi app.
  2. Open the menu and look for Account Management (some versions call it Account or Profile).
  3. Find the two-factor or two-step setting and follow the prompts to add your phone number or an authenticator app.
  4. When asked whether to trust this device, say yes on your own phone only.

Checked against NETGEAR Support (How do I add a trusted two-factor authentication (2FA) device to my NETGEAR account using the Nighthawk or Orbi app?) on November 15, 2026.

Good account habits

  • Use a password you don't use anywhere else.
  • Keep the email address on the account current; that's where reset links go.
  • If you get a NETGEAR password-reset email you didn't ask for, don't click it. Open the app yourself instead.
Scam alert
Check phone numbers in "Netgear" emails
Netgear owners have reported emails that look like account or password-reset messages but list a phone number that isn't Netgear's. Real support numbers come from netgear.com, never from an email, text or pop-up. See Fake Netgear Support and Other Scams.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Setting Up a New Orbi

The Orbi app walks you through setup one screen at a time. Plan on 20 to 30 minutes, and do it on a day when you don't need the internet for anything urgent.

Before you start

  • Your phone, charged, with the Orbi app installed (see The Nighthawk and Orbi Apps).
  • Your NETGEAR account email and password, or a few minutes to create one.
  • The Ethernet cable from the box, and a spot near your modem for the Orbi router.
  • If you're replacing an old router, its Wi-Fi name and password. Reusing them saves reconnecting every device.

The setup, step by step

  1. Unplug your modem for a minute, then plug it back in and let it start up.
  2. Connect the Ethernet cable from the modem to the Internet port on the Orbi router (the unit marked as the router, not a satellite), and plug in the router's power.
  3. Open the Orbi app, sign in or create your NETGEAR account, then tap Set up an Orbi (or Get Started).
  4. Follow the prompts. The app may ask you to scan the QR code on the router's label.
  5. Choose your Wi-Fi name and password, and set the router's admin password when asked.
  6. Place each satellite where the app suggests and plug it in. The app finds and connects it.
  7. Let the app finish any firmware update. Don't unplug anything while it says it's updating.

Checked against NETGEAR Support (Set up an Orbi WiFi System) and NETGEAR's Orbi Login and Setup Guide on November 15, 2026.

Tip
Keep the old name and password
If you give the Orbi the same Wi-Fi name and password your old router used, most of your devices, including smart TVs, printers and doorbells, rejoin on their own. That alone can save an hour.
Good to know
A cable Orbi is set up a little differently
Orbi models with a built-in cable modem (such as the CBK40) connect to the coax wire, and your cable company has to activate the modem part. Netgear has a separate setup article for those.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Setting Up a Nighthawk Router

A Nighthawk router sets up much like an Orbi, minus the satellites. The Nighthawk app does the heavy lifting.

  1. Turn off or unplug your modem for a minute, then plug it back in.
  2. Connect an Ethernet cable from the modem to the Nighthawk's Internet port (often yellow or labeled), and plug in the router.
  3. Wait a couple of minutes for the router's lights to settle.
  4. On your phone, join the Wi-Fi name printed on the router's label, using the password on the label.
  5. Open the Nighthawk app and sign in with your NETGEAR account (or create one).
  6. Follow the prompts to name your Wi-Fi, set its password, and set the admin password.
  7. Let the app check for a firmware update and install it.

Where to put it

A single router reaches farthest when it sits in the middle of the house, up off the floor, out in the open. If your modem is stuck at one end of the house in the basement, that's a reason people choose Orbi instead. Where to Put the Router and Satellites has more.

Tip
Replacing a provider's Wi-Fi box
If your internet company's gateway also makes Wi-Fi, the Nighthawk can still go behind it. Many people then turn off the provider box's Wi-Fi so there's only one network. Your provider can tell you how on its equipment.
Watch out
Leave it plugged in during updates
Netgear warns not to interrupt a firmware update. Pulling the plug halfway through can leave the router unable to start.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Where to Put the Router and Satellites

Where the boxes sit matters more than which model you bought. Wi-Fi is a radio signal, and walls, floors, metal and water all soak it up.

For any Netgear router

  • Out in the open, not inside a cabinet, closet or entertainment center.
  • Up off the floor, on a shelf or table.
  • Away from microwaves, cordless phone bases, fish tanks and big mirrors.
  • As central as the modem's cable will reasonably allow.

For Orbi satellites

  • About halfway between the router and the area that needs better Wi-Fi, not in the dead spot itself.
  • Within a good signal of the router. A satellite can only pass along what it receives.
  • One per floor works well in a two-story home.
  • If your home has Ethernet wiring, some Orbi models can use a wired connection to a satellite for the fastest, steadiest link.

Let the app tell you

The Orbi app shows how well each satellite connects to the router. If it reports a weak or fair connection, move the satellite a little closer to the router and check again. The colored light on the satellite tells you the same thing (see Adding or Re-Syncing a Satellite).

Tip
Test where you actually sit
Run a speed test (see Checking Your Internet Speed) from your favorite chair, the kitchen and the bedroom. That tells you more than any map.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Adding or Re-Syncing a Satellite

Orbi satellites that came in the box usually connect during setup. An add-on satellite you bought later, or one that lost its connection, can be joined with the Sync buttons.

Syncing with the buttons

  1. Plug in the satellite and wait until its light shows it's ready to sync (solid white on many models).
  2. Press the Sync button on the back of the satellite.
  3. Within two minutes, press the Sync button on the back of the router.
  4. Watch the satellite's light. When it shows a good connection, move it to its final spot.

Checked against NETGEAR Support (How do I sync my Orbi router and satellite?) on November 15, 2026.

What the satellite's light is telling you

LightWhat it means
Pulsing whiteStarting up. Wait.
Solid whiteReady to sync. Press the Sync buttons.
BlueSynced, good connection. The light turns off after a few minutes.
AmberSynced, but only a fair connection. Move it closer to the router.
MagentaSync failed, or it lost the router. Move it closer and try again.
Good to know
Models differ a little
Colors and timings vary between Orbi generations. If yours doesn't match the table, search Netgear's support site for your model number plus "LED."
Tip
Use the app for add-ons
In the Orbi app, look for an option to add a satellite. The app guides the same sync process and tells you when it's done.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Setting Up

Without the App: routerlogin.net and orbilogin.com

Every Netgear router also has settings pages you can open in a web browser on a computer connected to its Wi-Fi or by cable. They hold some settings the apps don't, and they're the way in when the app won't connect.

How to get there

  1. Connect your computer to your Netgear Wi-Fi (or plug it in with a cable).
  2. Open a web browser and type routerlogin.net for a Nighthawk or orbilogin.com for an Orbi into the address bar, then press Enter.
  3. If that doesn't open, try the router's address, often 192.168.1.1.
  4. Sign in with the admin username and your admin password (see Three Different Passwords).

Checked against NETGEAR Support (Router Login Page Access; How do I change my Orbi WiFi System's admin login password?) on November 15, 2026.

Good to know
These addresses only work at home
routerlogin.net and orbilogin.com lead to the box on your own shelf, so they only open when you're connected to that router. They are not websites on the open internet.
Scam alert
Don't trust "routerlogin" lookalike sites
If you search the web for "routerlogin" you may land on pages run by other companies that ask you to call a support number or pay for help. Type the address yourself, at home, on your own Wi-Fi.
Tip
Menus have English names
Most settings live under a Basic or Advanced tab. Firmware updates, for example, are usually under Advanced > Administration.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Finding and Changing Your Wi-Fi Name and Password

Your Wi-Fi name (Netgear also calls it the SSID) is what shows in the list of networks on a phone. Your Wi-Fi password is what lets a device join. You'll look these up far more often than you change them.

Just looking it up

  • Open the Nighthawk or Orbi app and tap WiFi Settings (or the WiFi tile). The name and password are shown there.
  • Never changed it? It's printed on the router's label.
  • An iPhone or Android phone that's already connected can also show or share the password from its own Wi-Fi settings.

Changing it in the Nighthawk app

  1. Connect your phone to your Netgear Wi-Fi and open the Nighthawk app.
  2. Tap WiFi Settings. If asked, sign in with the router's admin password.
  3. Choose the network to change, then type the new name and password.
  4. Tap Save.

Checked against NETGEAR Support (How do I change my WiFi network name and password using the Nighthawk app?) on November 15, 2026.

Changing it in the Orbi app

  1. Open the Orbi app.
  2. Tap WiFi Settings.
  3. Type the new network name and password.
  4. Tap Save. The router passes the change to the satellites automatically.

Checked against NETGEAR Support (How do I change the network name (SSID) and password of my Orbi WiFi System?) on November 15, 2026.

Watch out
Every device has to reconnect
When you change the password, every phone, TV, printer, doorbell and thermostat drops off and has to be joined again with the new password. Do it when you have time, and make a list of your smart devices first. Changing only the name (or only the password) has the same effect.
Tip
A good Wi-Fi password
Make it long and easy to say aloud, like three or four unrelated words with a number: maple-bucket-river-42. Long beats complicated.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Seeing What's Connected

The Nighthawk and Orbi apps keep a Device List of everything connected to your Wi-Fi. It's a simple way to spot a device you don't recognize, or to check that the TV or doorbell is actually online.

  1. Open the Nighthawk or Orbi app.
  2. Tap Device List (some versions show a Devices tile on the main screen).
  3. Scroll through the names. Tap one to see more about it.

Making sense of the names

  • Many devices show a sensible name, like "Living-Room-TV" or "Marys-iPhone."
  • Some show only the maker ("Espressif," "Amazon," "Roku") or a string of letters and numbers. Smart plugs and cameras often look like this.
  • Phones and tablets may use a private or random address, so the same phone can appear under a new entry over time.
Tip
Rename what you recognize
When you figure out what a device is, tap it and give it a name you'll recognize next time. In a few minutes the whole list becomes readable.
Watch out
Something you don't recognize?
It's usually a gadget you forgot about. If you're truly unsure, pause it (see Pausing the Internet for a Device) and see what stops working. If nothing does and it keeps coming back, change your Wi-Fi password.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Pausing the Internet for a Device

Pausing cuts one device off the internet until you turn it back on. It's handy for a grandchild's tablet at dinner, or for testing whether an unknown device matters. It's free and built into both apps.

In the Nighthawk app

  1. Open the Nighthawk app and sign in with the router's admin password if asked.
  2. Tap Device List.
  3. Find the device and move its Pause/Resume slider to pause it.
  4. Move the slider back to resume.

Checked against NETGEAR Support (How do I pause or resume Internet for a device on my network using the Nighthawk app?) on November 15, 2026.

In the Orbi app

  1. Open the Orbi app and tap Device List.
  2. Find the device and move its slider to the left to pause its internet.
  3. Move it back to restore the internet.
Good to know
You can't pause the phone you're holding
Netgear notes that you can't pause the phone or tablet you're using to make the change. That stops you from locking yourself out of the app.
Tip
Schedules and bedtimes
Pausing in the Device List is on and off by hand. Bedtimes, daily time limits and filters are part of Smart Parental Controls (see Smart Parental Controls).
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Guest Wi-Fi for Visitors

A guest network is a second Wi-Fi with its own name and password. Visitors get the internet, but they don't get your main password, and their phones are kept apart from your computers and printers.

Turning it on in the Nighthawk app

  1. Open the Nighthawk app and tap the Guest WiFi tile.
  2. Choose the band to set up (2.4 GHz or 5 GHz). If you're not sure, set up 2.4 GHz; it reaches farther.
  3. Turn on the Guest WiFi Enabled slider.
  4. Type a guest network name and password, then save.

Checked against NETGEAR Support (How do I set up guest WiFi using the Nighthawk app?) on November 15, 2026.

On an Orbi

The Orbi app lists guest Wi-Fi among its features; look for a Guest WiFi tile or setting. If you don't see it, use the browser pages: go to orbilogin.com, sign in as admin, select Guest Network, check Enable Guest Network, set a name and password, and click Apply.

Good uses for guest Wi-Fi

  • Family visiting for the holidays.
  • A repair person, caregiver or house sitter.
  • Smart plugs, cameras and gadgets you'd rather keep away from your computer.
Tip
Make it easy to share
Write the guest name and password on a card by the door, or show it on your phone. Ways Your Netgear Can Make Life Easier has a trick for guest Wi-Fi that switches itself off.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Checking Your Internet Speed

A speed test tells you whether you're getting the internet you pay for, and whether a slow spot is the Wi-Fi or the internet company. Netgear says its apps are the simplest way to check.

  1. Open the Nighthawk or Orbi app.
  2. Look for Internet Speed or Speed Test on the main screen and tap it.
  3. Tap the button to start the test, and wait a minute while it measures.
  4. Compare the download number with the speed on your internet bill.

Checked against NETGEAR Support (How do I check my Internet speed?) on November 15, 2026.

Reading the result

What you seeWhat it usually means
Close to your plan's speedThe internet is fine. A slow room is a Wi-Fi placement problem (see Where to Put the Router and Satellites).
Much lower than your planRestart the modem and router (see Restarting the Right Way) and test again. Still low? Call your internet company.
Fast near the router, slow far awayMove the router or an Orbi satellite, or consider adding a satellite.
Good to know
Orbi keeps a history
The Orbi app keeps a record of past speed tests, so you can see whether the internet is slower than it used to be.
Tip
A second opinion
From a computer on your Wi-Fi you can also use speedtest.net. Netgear suggests it too.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Restarting the Right Way

Turning it off and on again really does fix a lot of internet trouble. The trick is doing it in the right order, so each box finds the one before it.

Power-cycling an Orbi or Nighthawk

  1. Unplug the power from the modem, the Netgear router, and any Orbi satellites.
  2. Wait about a minute.
  3. Plug in the modem first and wait until its lights settle (a few minutes).
  4. Plug in the router. Orbi devices take about two minutes to restart.
  5. Plug in the satellites last.

Checked against NETGEAR Support (How do I power cycle my Orbi network?) on November 15, 2026.

Watch out
Restart is not reset
Unplugging is a restart, and it erases nothing. The small Reset hole on the back is a factory reset, and it erases all your settings. Don't press it to fix a slow connection. See Factory Reset: The Last Resort.
Tip
Mark the plugs
Put a small sticker on each power cord: "modem," "router," "satellite." When something goes wrong, anyone in the house can follow the order.
Good to know
Restarting from away
If you're not home, a restart needs someone there to unplug the boxes. The app's Anywhere Access feature (see Ways Your Netgear Can Make Life Easier) lets you check on the network from away.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Netgear's Subscriptions

Netgear Armor: What It Is

Netgear Armor is a paid security service, powered by Bitdefender, that runs in your router and on your devices. The apps offer it during setup and on the Security tile, and many new routers come with a free trial. Plenty of people discover it only when the first renewal charge shows up, so it's worth knowing what it is.

What Armor does

  • Network protection in the router: blocks known harmful websites and watches for attacks on the devices in your home, including smart TVs and cameras that can't run antivirus.
  • Bitdefender software for your devices: with a subscription you can install Bitdefender protection on Windows and Mac computers and on phones and tablets.
  • Monitoring features: Netgear's current feature list includes breach and dark web monitoring.
  • Since January 2025, warranty and support: Armor now bundles an extended warranty and 24/7 priority tech support for eligible Netgear routers.

Checked against NETGEAR Support (What is NETGEAR Armor?; NETGEAR Armor's features), the netgear.com Armor page and NETGEAR's January 2025 press release on November 15, 2026.

Putting the Bitdefender software on a computer

  1. On the Windows or Mac computer, open a web browser and go to armor-install.com.
  2. Sign in with your NETGEAR account when asked, and follow the prompts.
  3. For a phone or tablet, use the Nighthawk or Orbi app instead: open the Security tile and look for the option to protect another device.

Checked against NETGEAR Support (How do I install Bitdefender Total Security on my Windows or MacOS device?) on November 15, 2026.

Watch out
One antivirus at a time
Netgear says the Bitdefender software needs other security software removed before it installs. If you already pay for Norton, McAfee or another antivirus, decide which one to keep, rather than running two.
Good to know
If you cancel, the software goes too
Netgear says you can't keep the Bitdefender software after an Armor subscription ends.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Netgear's Subscriptions

Armor Prices, Trials and Warranty

Here's what Armor costs in the United States as of November 2026, from Netgear's own Armor page. Netgear says the price depends on your region, and the app shows the price and any promotion for your area.

PlanPrice (U.S.)What's added
Free trial30 daysTry Armor before paying
Armor$8.33 a month, billed yearly (just under $100 a year)Network and device protection, extended warranty, 24/7 priority support
Armor Plus$12.50 a month, billed yearly ($149.99 a year)Everything in Armor, plus unlimited VPN for up to 50 devices, ad blocking and anti-tracking

Checked against the netgear.com Armor page and NETGEAR Support (How much does a NETGEAR Armor subscription cost?) on November 15, 2026.

The warranty part, in plain English

In the United States and Canada, Netgear says an Armor subscription extends your router's hardware warranty to two years, up to a maximum of three years from purchase. The warranty extras apply to eligible Netgear routers bought in the U.S., U.K. or Canada within the last three years.

Where to see what you're paying for

  1. Open the Nighthawk or Orbi app.
  2. Open the Menu and tap My Subscriptions.
  3. Tap a service to see the plan, the renewal date and whether Auto renew is on.

Checked against NETGEAR Support (How do I view my NETGEAR Armor subscription plan?; How do I cancel my NETGEAR service subscription?) on November 15, 2026.

Tip
Put the renewal date on your calendar
Armor renews automatically each year. Write the date down a week ahead so you can decide on purpose, not by surprise.
Good to know
Old prices you may see
Older articles and forum posts quote lower Armor prices from earlier years. Go by what the app or netgear.com shows today.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Netgear's Subscriptions

Canceling or Pausing a Subscription

If you don't want Armor or Smart Parental Controls, you can stop the renewal yourself in a few taps. How it works depends on how long ago you paid and where you bought it.

Stop it from renewing (most people)

  1. Open the Nighthawk or Orbi app.
  2. Open the Menu and tap My Subscriptions.
  3. Tap the service (Armor or Smart Parental Controls).
  4. Turn off the Auto renew toggle.

Netgear says the service keeps working until the end of the period you've paid for, and you aren't charged again when it ends.

Checked against NETGEAR Support (How do I cancel my NETGEAR service subscription?) on November 15, 2026.

Paid in the last 30 days and want your money back?

Netgear says a refund is possible within 30 days of purchase, but it isn't automatic. You cancel at my.netgear.com under Services, then fill in Netgear's cancellation and refund form. Access ends as soon as the refund is requested.

Bought it through Bitdefender?

If you bought Armor from the Bitdefender store, turning off the app toggle may not be enough. Sign in to your Bitdefender account at store.bitdefender.com, open My Products, and stop automatic renewal there.

Just want a break?

If Armor is blocking a site you trust or getting in the way, you can pause it rather than cancel: in the app, go to Menu > Settings > Security and turn off Enable NETGEAR Armor. Turn it back on afterward.

Scam alert
Nobody needs to cancel it for you
If a caller offers to cancel or refund your "Netgear subscription" and asks for remote access, a card number or gift cards, it's a scam. You can do all of this yourself in the app.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Netgear's Subscriptions

Smart Parental Controls

Netgear Smart Parental Controls (Netgear abbreviates it SPC) is Netgear's service for managing children's and grandchildren's internet time on Nighthawk and Orbi routers. It works from the Parental Controls tile in the app.

What it costs

PlanPrice
BasicFree, with limited features.
Premium$7.99 a month or $69.99 a year in the U.S., each with a 30-day free trial.

Premium adds the fuller features, such as time limits and filters, and includes the My Time by NETGEAR app for kids' devices at no extra charge. Prices differ by country; check the app before you subscribe.

Checked against NETGEAR Support (What subscription plans are available for NETGEAR Smart Parental Controls?) on November 15, 2026.

Pausing from Parental Controls

  1. Open the Nighthawk or Orbi app and tap the Parental Controls tile.
  2. Select the person's profile or device.
  3. Tap the pause icon. Tap play to resume.
Watch out
Careful with the Home profile
Netgear warns that pausing the Home profile pauses every device on the network, including yours. Pause the child's profile instead.
Good to know
What happened to Circle?
Older Netgear routers offered parental controls through a service called Circle. Netgear has since moved to Smart Parental Controls, and some owners report that old Circle rules stopped working. Bill's guide Parental Controls on Wi-Fi compares the options.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Netgear's Subscriptions

Do You Need a Subscription?

Your router works perfectly well without Armor or Smart Parental Controls. The Wi-Fi, guest network, device pause, speed test and firmware updates are all free. The subscriptions are add-ons, and whether they're worth it depends on your household.

Armor may be worth it if…

  • You'd use the Bitdefender software on several computers and phones instead of buying antivirus separately.
  • You value the extended warranty and priority phone support on a newer, expensive router.
  • You have many smart gadgets and want the router itself watching for trouble.

You can probably skip it if…

  • You already pay for antivirus you're happy with. (Windows and Mac also have built-in protection.)
  • Your router is old or out of warranty anyway.
  • Your internet company already includes a security service with your plan.

Smart Parental Controls may be worth it if…

  • Grandchildren stay often and you want bedtimes and time limits that work on every device.
  • You'd rather set rules once at the router than on each tablet and game console.
Tip
Free alternatives worth knowing
Pausing a device in the Device List is free (see Pausing the Internet for a Device). Phones and tablets also have their own free screen-time controls, such as Screen Time on iPhone and Google Family Link on Android.
From Bill
My honest take
There's no wrong answer here. Decide during the free trial, not after the first charge, and turn Auto renew off if you're not sure (see Canceling or Pausing a Subscription).
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Keeping It Safe and Up to Date

Firmware Updates

Firmware is the software inside your router. Netgear releases updates that fix security holes and bugs, and Netgear publishes security advisories every month. Keeping firmware current is the most important thing you can do to keep your home network safe.

Updating a Nighthawk in the app

  1. Connect your phone to your Netgear Wi-Fi and open the Nighthawk app. Sign in if asked.
  2. Enter the router's admin password if prompted.
  3. Tap the picture of your router, scroll down and tap CHECK FOR UPDATES.
  4. If an update is available, tap UPDATE. Leave the router alone until it finishes and restarts.

Checked against NETGEAR Support (How do I update my NETGEAR Nighthawk firmware?; How do I update the firmware on my NETGEAR router?) on November 15, 2026.

Updating an Orbi in the app

  1. Open the Orbi app.
  2. Go to Menu > Settings > Router Settings.
  3. Tap Check for Updates. If the button changes to Update Firmware, tap it.
  4. Wait while the router and satellites update and restart.

Checked against NETGEAR Support (How do I update the firmware of my Orbi WiFi System?) on November 15, 2026.

Automatic updates

Orbi systems update themselves automatically in the middle of the night, between about 1:00 a.m. and 4:00 a.m. local time. Netgear suggests checking that the router's time zone is right (at orbilogin.com under Advanced > Security > Schedule) so updates don't land at a bad hour. On many Nighthawk models, automatic updates are set in the browser pages under Advanced > Administration > Router Update.

Checked against NETGEAR Support (automatic firmware updates in the middle of the night for Orbi; How do I enable/disable auto firmware update?) on November 15, 2026.

Watch out
Never unplug during an update
Netgear warns that interrupting an update can corrupt the firmware. If the lights look odd for a few minutes, that's normal. Give it at least 10 minutes before you worry.
Tip
Check twice a year
Even with automatic updates on, open the app and tap Check for Updates when the clocks change in spring and fall. Orbi satellites occasionally miss an automatic update.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Keeping It Safe and Up to Date

Older Models and End of Support

Every router eventually stops getting updates. Netgear calls that End-of-Support, shown as EoS in its monthly security advisories. Once a model reaches it, Netgear says no further security updates are planned, and it strongly recommends retiring the device and upgrading.

Popular models marked EoS in 2026 advisories

ModelCommon name
R7000, R7000PNighthawk AC1900 / AC2300 era routers
R7800, R9000Nighthawk X4S and X10
RAX20, RAX28, RAX30, RAX40, RAX45Early Nighthawk Wi-Fi 6 routers
RAX120, RAX200High-end Nighthawk Wi-Fi 6 routers
MR60, MR70Nighthawk Mesh systems

Checked against NETGEAR Support (August, September and October 2026 NETGEAR Security Advisories) on November 15, 2026.

This is not a complete list. To check your own model, look up its model number on Netgear's support site, or search Netgear's latest monthly security advisory for it.

Why it matters

The FBI has warned that criminals take over end-of-life routers and use them to hide their activity, and it advises replacing them. A router that still works fine can still be unsafe if it no longer gets fixes.

Good to know
The 2026 FCC router rule
In March 2026 the FCC restricted new foreign-made router models. The FCC has said people who already own a router don't need to do anything, and previously approved models can still be sold and used. It isn't a reason to throw out a working, supported Netgear.
From Bill
Replacing an old one
If your router is on Netgear's EoS list, it's time to plan a replacement. I can help you pick one that fits your home and move everything over in one visit.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Keeping It Safe and Up to Date

Changing and Recovering the Admin Password

The admin password protects your router's settings. If someone else knows it, they can change your Wi-Fi, see your devices or turn off your security. Netgear recommends changing it from the default.

Changing it in the browser pages

  1. On a computer connected to your Netgear Wi-Fi, go to routerlogin.net (Nighthawk) or orbilogin.com (Orbi) and sign in as admin.
  2. Select Advanced > Administration > Set Password.
  3. Type the old password, then the new password twice.
  4. Check Enable Password Recovery if you see it, and pick two security questions (see Ways Your Netgear Can Make Life Easier).
  5. Click Apply.

Checked against NETGEAR Support (How do I change the admin password on my NETGEAR router?; How do I change my Orbi WiFi System's admin login password?) on November 15, 2026.

Forgot the admin password?

  • If you set up password recovery, enter a wrong password three times and the router offers a recovery screen: type the router's serial number and answer your two questions.
  • Netgear says the recovery screen doesn't work in the Safari browser, so use Chrome or Firefox on a computer.
  • If you never set up recovery, the only way back in is a factory reset (see Factory Reset: The Last Resort), which erases all settings.
Safety
Admin password, not Wi-Fi password
Guests only ever need the Wi-Fi password. Keep the admin password to yourself and one trusted family member.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Keeping It Safe and Up to Date

Security Settings Worth Checking

Netgear's apps make sensible choices for you. A few settings are still worth a once-a-year look, because they decide who can reach your network.

Your quick checklist

  1. Firmware is current (see Firmware Updates).
  2. Admin password changed from any default (see Changing and Recovering the Admin Password).
  3. Wi-Fi security is set to WPA2 or WPA3, never "None" or WEP. The FTC calls WPA3 the newest and best, with WPA2 still fine.
  4. Guest Wi-Fi is used for visitors and gadgets instead of handing out your main password.
  5. Two-step sign-in is on for your NETGEAR account (see Your NETGEAR Account and Two-Step Sign-In).

Checked against FTC (How To Secure Your Home Wi-Fi Network) (sibling check: securing-your-home-network) on November 15, 2026.

Anywhere Access and the end of Remote Management

Netgear's apps let you manage your router while you're away from home through a feature called Anywhere Access (it used to be called Remote Management). Netgear says it's a secure connection through the Netgear cloud that opens no ports on your router, and you must sign in with your NETGEAR account. It's on by default. The older browser-based Remote Management feature is being removed from most Netgear routers through firmware updates.

Checked against NETGEAR Support (Remote Management is now Anywhere Access; Why is Anywhere Access enabled by default?; Why is the Remote Management feature being removed?) on November 15, 2026.

Tip
If you never use it
If you never manage your router from away, you can turn Anywhere Access off in the app under Menu > Settings > Anywhere Access. Then a strong NETGEAR account password matters a little less, though it's still worth having.
Good to know
More on home network safety
Bill's guide Securing Your Home Network goes deeper on WPS, UPnP and smart gadgets, for every brand of router.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Keeping It Safe and Up to Date

Fake Netgear Support and Other Scams

Router owners are a favorite target for tech-support scammers. The trick usually starts with a web search: you type "Netgear support number" or "routerlogin help," click a convincing ad or website, and call a number that belongs to a scammer, not Netgear.

What Netgear itself says

  • Searches for support can turn up fraudulent sites that imitate Netgear's support pages.
  • Netgear does not call customers to ask them to install remote-access software such as AnyDesk, or to pay on the spot for support.
  • Netgear will never ask to take control of your computer or phone.
  • If that happens, hang up and call Netgear's real number, 1-888-NETGEAR (1-888-638-4327).

Checked against NETGEAR Support (How do I identify an official NETGEAR website or social media account?) on November 15, 2026.

How the scam usually goes

  1. You search for help and call a number from a search result, ad or pop-up.
  2. A friendly "technician" says your router is hacked, infected or out of date.
  3. They ask you to install a remote-access app so they can "look."
  4. They show you scary screens, then ask for a few hundred dollars for a "security package," often by card, gift card or wire.
Scam alert
The rule that stops it
Never call a support number from a search result, pop-up, email or text. Get it from netgear.com typed by you, from the box or from the app. And never let someone you didn't already know connect to your computer.
Safety
If you already let them in
Turn off the computer's Wi-Fi or unplug it. Call your bank or card company to dispute the charge. Change your important passwords from a different device. Report it at ReportFraud.ftc.gov. Then have the computer checked by someone you trust.
Watch out
Pop-ups that say your router is infected
A web page that shouts your router or computer is infected and shows a phone number is a scam. Close the browser. Your router doesn't send warnings through web pop-ups.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Getting Help

When the Internet Stops Working

When the internet goes out, work through this ladder one rung at a time, from the top. Check whether things work again after each step. Most outages are fixed in the first four.

  1. Is it everything, or one device? If only one phone or TV is stuck, restart that device and turn its Wi-Fi off and on. The router is probably fine.
  2. Is it an outage? Check your internet company's app or website on your phone's cellular data, or call the number on your bill.
  3. Check the cables. Make sure the cable from the modem to the Netgear's Internet port is snug at both ends, and every power plug is in.
  4. Restart in order: modem first, then the router, then satellites (see Restarting the Right Way).
  5. Look at the lights. A modem with no internet light means the problem is on the provider's side. An Orbi satellite showing magenta has lost the router (see Adding or Re-Syncing a Satellite).
  6. Open the app. The Nighthawk or Orbi app often says plainly whether the router sees the internet.
  7. Check for a firmware update once things are back (see Firmware Updates).
  8. Still stuck? Call your internet company if the modem has no connection, or Netgear support if the modem is fine and the router isn't.

Specific troubles

What you seeWhat it usually means
Wi-Fi name shows, but no internetThe router has lost the modem or the provider. Cables, then restart in order.
Wi-Fi name has vanishedThe router is off, restarting or updating. Wait 10 minutes, then check its power.
Slow in one room onlyPlacement. Move the router or a satellite (see Where to Put the Router and Satellites).
Slow everywhereRun a speed test (see Checking Your Internet Speed). Low result: restart, then call the provider.
One device won't connectForget the network on that device and rejoin with the password.
A satellite keeps droppingMove it closer to the router, or re-sync it (see Adding or Re-Syncing a Satellite).
Can't sign in to the appCheck which password it wants (see Three Different Passwords).
Tip
Keep your phone's data on
When the Wi-Fi is down, your phone can still reach your provider's outage page and the Netgear app over cellular data.
Watch out
Don't reach for the reset button first
A factory reset feels decisive, but it erases everything and rarely fixes an internet outage. Save it for the end (see Factory Reset: The Last Resort).
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Getting Help

Factory Reset: The Last Resort

A factory reset puts your router back exactly as it came out of the box. It's the right move when you've forgotten the admin password with no recovery set up, when you're giving the router away, or when Netgear support asks you to.

Watch out
What a reset erases
Netgear says a factory reset deletes all your personalized settings, including the admin username and password, your Wi-Fi name and password, and security settings. Every device in the house will need to rejoin, and you'll set the router up again from scratch.

How to do it

  1. Leave the router plugged in and turned on.
  2. Find the small Reset (or Restore Factory Settings) hole on the back or bottom.
  3. Press and hold the button inside with a straightened paper clip. Netgear's general guide says about seven seconds; its Orbi and Nighthawk password article says 15 seconds. Check your model's page if unsure.
  4. Release it and let the router restart. This takes a few minutes.
  5. Set it up again in the Nighthawk or Orbi app (see Setting Up a New Orbi or Setting Up a Nighthawk Router).

Checked against NETGEAR Support (How do I perform a factory reset on my NETGEAR router?; How to reset your NETGEAR router admin password) on November 15, 2026.

After the reset

  • Use the same Wi-Fi name and password as before so your devices reconnect on their own.
  • If you subscribe to Armor or Smart Parental Controls, reactivate them in the app afterward.
  • Install any firmware update the app offers.
Tip
Giving the router away?
Reset it first, then remove it from your NETGEAR account in the app so the new owner can register it.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Getting Help

Getting Real Help from Netgear

Netgear offers support for its products, but how much you get depends on how new your equipment is and whether you pay for Armor or ProSupport. Here's how to reach the real Netgear.

Where real help comes from

  • netgear.com/support, typed into your browser yourself. Search your model number for articles, manuals and firmware.
  • The Nighthawk or Orbi app, which links to Netgear support for your registered router.
  • my.netgear.com, where your registered products and subscriptions are listed.
  • Netgear's U.S. number, 1-888-NETGEAR (1-888-638-4327), as listed on Netgear's own website.

Free support, then paid

New Netgear products come with complimentary technical support for a limited time after purchase. Netgear's own pages give different lengths for this (90 days on some, one year on its newest warranty page), so check the warranty page for your product and purchase date. After that, support comes with an Armor subscription or a paid ProSupport plan.

Checked against NETGEAR Support (NETGEAR warranty and support offerings) and NETGEAR ProSupport for Home on November 15, 2026.

Tip
Register your router
Registering your router in the app (it happens during setup) puts the serial number and purchase date on file, which makes warranty and support calls much shorter. Keep your receipt or a photo of it.
Scam alert
Free support never starts with a search ad
If a "Netgear" agent you found through a search asks for money before helping, or wants remote access, hang up. See Fake Netgear Support and Other Scams.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Getting Help

Words You'll Hear

Router talk comes with plenty of jargon. Here's a plain-English dictionary so none of it can make you feel left out.

WordWhat it means in plain English
RouterThe box that makes your Wi-Fi and shares the internet.
ModemThe box that brings the internet in from your provider.
MeshSeveral matching units working as one Wi-Fi network. Orbi is mesh.
SatelliteAn Orbi unit that extends the router's Wi-Fi to another part of the house.
SSIDYour Wi-Fi network's name.
Admin passwordThe password for the router's own settings.
FirmwareThe software inside the router. Updates fix bugs and security holes.
EoS (End-of-Support)Netgear has stopped making updates for that model.
SyncPairing an Orbi satellite with its router.
BackhaulThe link between an Orbi router and its satellites, wireless or by cable.
Wi-Fi 6, 6E, 7Generations of Wi-Fi. Higher numbers are newer and faster.
2.4 GHz / 5 GHz / 6 GHzWi-Fi radio bands. 2.4 reaches farther; 5 and 6 are faster up close.
WPA2 / WPA3Wi-Fi security standards. WPA3 is newest.
Anywhere AccessNetgear's name for managing your router through the app while you're away.
ArmorNetgear's paid security service, powered by Bitdefender.
SPCSmart Parental Controls, Netgear's parental controls service.
Tip
A dictionary, not a quiz
Nobody expects you to memorize these. Come back whenever a word trips you up.
Good to know
Same idea, different brand
Other mesh systems use different words for the same things: eero calls satellites simply "eeros," and Google calls them "points." The ideas in this guide carry over.
Tip
Look up your model
Your model number (on the label) is the key to finding the right article on Netgear's support site.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Getting Help

When to Call Bill

Most of what's in this guide you can absolutely do yourself. But some jobs go faster with someone beside you, and there's no shame in that.

Good reasons to call

  • A new Orbi or Nighthawk to set up, with every TV, printer, doorbell and thermostat moved over.
  • Wi-Fi that's weak in part of the house and you're not sure whether to move, add or replace a satellite.
  • Your router is on Netgear's End-of-Support list and it's time to choose a replacement.
  • You were charged for Armor or Smart Parental Controls and want help deciding or canceling.
  • Two routers fighting each other: your provider's box and your Netgear.
  • You're locked out of the admin pages and don't know which password is which.
  • You called a "Netgear support" number and now you're worried it wasn't real.
Why it helps
Wi-Fi Help
My Wi-Fi Help service is made for exactly this: setting up or fixing your Netgear equipment, putting the router and satellites where they work best, checking your security settings and updates, and showing you how to do the everyday jobs yourself in the app.
Scam alert
A real technician never cold-calls you
If someone calls out of the blue saying your router or computer has a problem and they need remote access or payment, hang up. I'll never call you unasked to "fix" something.

How to reach me

Call or text (330) 200-8042, or book online at billshometech.com/book. Bill's Home Tech serves Portage County, Ohio, and I bring more than 30 years of professional experience to every visit. If you reach my assistant Sophie on the main line, she can answer simple questions and get you on my schedule.

From Bill
What it costs
My help is $49 remote · $99 in your home. The guides themselves, like this one, are free to read and share.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Fixing Problems & Getting Help

Your Netgear Cheat-Sheet

The most-used steps on one page. Keep it handy, save it or print it for the fridge.

Where things are in the app

I want to…Go to
Wi-Fi name and passwordWiFi Settings
See what's connectedDevice List
Pause a deviceDevice List, then the device's slider
Guest Wi-FiGuest WiFi tile (Nighthawk); Guest WiFi or orbilogin.com (Orbi)
Speed testInternet Speed / Speed Test
Firmware (Orbi)Menu > Settings > Router Settings > Check for Updates
Firmware (Nighthawk)Tap the router picture > CHECK FOR UPDATES
SubscriptionsMenu > My Subscriptions > Auto renew
Pause ArmorMenu > Settings > Security
Away-from-home accessMenu > Settings > Anywhere Access

Addresses to know

WhatWhere
Nighthawk settings (at home)routerlogin.net
Orbi settings (at home)orbilogin.com
Your account and subscriptionsmy.netgear.com
Real Netgear supportnetgear.com/support · 1-888-NETGEAR

Restart in order

  1. Unplug the modem, router and satellites.
  2. Wait a minute.
  3. Plug in the modem; wait for its lights.
  4. Plug in the router; wait two minutes.
  5. Plug in the satellites.

Safety in five

  1. Keep the firmware updated.
  2. Change the admin password from any default.
  3. Give visitors the guest Wi-Fi, not your main password.
  4. Replace routers on Netgear's End-of-Support list.
  5. Never call a support number from a search result, pop-up or email.

Keep this handy

WhatNotes
Model number (on the label)_______________________________
Wi-Fi name_______________________________
Wi-Fi password_______________________________
Guest Wi-Fi name and password_______________________________
Admin password_______________________________
NETGEAR account email_______________________________
Subscription renewal date_______________________________
Internet company and phone_______________________________
Bill's Home Tech(330) 200-8042 · billshometech.com/book
From Bill
You're in charge of your Wi-Fi now
You know which app runs it, which password is which, and what the subscriptions really are. If it ever gets tricky, call or text me at (330) 200-8042.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
Step 1 of 5
1