Bill's Home Tech
Home Solar — help from Bill

Home Solar: Panels, Inverters & Apps

What are you trying to do?

Type it in plain words — like "gateway not reporting" or "why is my solar low in winter."

Keep it handy
Reading is free, with no sign-up. If you'd like, we can email you the link.
Bill's Home Tech · All manuals · (330) 200-8042 · Serving Portage County, Ohio
Prefer paper? Print this guide
All topics
Getting Started

A Note from Bill

Hello, and welcome. Maybe you had solar panels put on your roof last spring and the installer handed you a phone app on the way out the door. Maybe you bought a house that already had them. Or maybe a son or daughter set it all up and now you're the one getting the emails that say "system not reporting." Whichever it is, this guide is for you.

I'm Bill. I've spent more than 30 years working with technology, and these days I help folks here in Portage County feel at home with theirs. I wrote this guide the way I'd explain it at your kitchen table: slowly, in plain English, and without trying to sell you anything. When I use a word like "kilowatt-hour" or "inverter," I'll stop and explain it right then.

What this guide will do for you

  • Explain what the panels, the inverter and the other boxes on your house do, in a few minutes.
  • Teach you the two numbers that matter most — kW and kWh — so the app finally makes sense.
  • Walk you through the three apps most Ohio homes use: the Enphase App, mySolarEdge and the Tesla app.
  • Show you why production drops in winter, under snow and on cloudy days, and when a drop is worth a call.
  • Help you get the system back online after a new router or a new internet provider — the most common "problem" of all.
  • Explain home batteries, outages, net metering on your bill, warranties, and the solar scams to steer clear of.

The big promise: you can't break it by looking

Your solar app is a window, not a control panel. Opening it, tapping around, switching between the day and month views, reading the graphs — none of that changes anything on your roof. You can explore it as much as you like. Your system makes power on its own every sunny day whether or not you ever open the app.

Safety
My one firm rule in this guide
I'm a technology helper, not an electrician. Solar panels make electricity whenever light hits them, even when your power is out, and the wiring can be dangerous. So this guide never asks you to open a panel or box, touch wiring, flip breakers or disconnect switches, or climb on the roof. When something needs hands on the equipment, the right call is your solar installer or a licensed electrician. I'll say so plainly every time it comes up.
Why it helps
Why this matters
Once you can read your app, you'll know at a glance whether your system is doing its job — and you'll stop worrying about the normal ups and downs. That peace of mind is worth a lot when you've made a big investment in your home.

I'm only a phone call away

If anything in this guide leaves you unsure, call me at (330) 200-8042. I'm glad to help with the app, the account and the Wi-Fi side. For anything electrical, I'll point you to the right person.

Let's start with the simplest question: how does sunlight turn into power for your toaster?

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Ways Your Solar Can Make Life Easier

Your solar system already works on its own. These three small setups, all done from your phone, make it a little more helpful and a lot less worrying. A family member can help with any of them, and none of them involve touching the equipment.

1. Let your Powerwall get ready for storms by itself

Why it helps
Why this helps
Severe weather is the leading cause of power outages, Tesla says. With Storm Watch on, your Powerwall charges up when severe weather is forecast for your area, so it's ready if the power goes out — even if you keep a low backup reserve the rest of the time to save money.
  1. Open the Tesla app and choose your home energy site.
  2. Look in the Powerwall's settings for Storm Watch. Where it sits can move between app versions.
  3. Turn Storm Watch on.
  4. Make sure the app's notifications are allowed in your phone's settings, so you'll see when Storm Watch is active.
  5. Leave it on all year. It only acts when severe weather is forecast.
Tip
Good to know
No extra cost; it needs a Powerwall that's online (see the guide's chapter on Powerwall and Wi-Fi). Tesla doesn't promise it will act for every storm, so for a storm you're worried about, you can also raise the Backup Reserve yourself, which is the next item.

Checked against Tesla Support on November 15, 2026.

2. Top up your battery before a storm you're watching

Why it helps
Why this helps
If an ice storm or a summer windstorm is on the way and you'd feel better with a full battery, you can tell the Powerwall to keep more in reserve. It's one slider, and you can move it back once the weather passes.
  1. A day or so before the storm, open the Tesla app.
  2. Tap Settings, then Powerwall.
  3. Move the Backup Reserve slider up, for example to 80 or 100 percent.
  4. Give the battery time to fill. Sunny hours before the storm help most.
  5. After the storm passes, move the slider back to your everyday setting.
Tip
Good to know
No cost. Tesla says a 100 percent reserve stops Self-Powered and Time-Based Control from using the battery, so you'll buy more from the grid while it's set that high, and it shows a Low Backup Reserve warning below 20 percent. Enphase and SolarEdge batteries have their own reserve settings in their apps; ask your installer where.

Checked against Tesla Support on November 15, 2026.

3. Keep your solar app working through a router change

Why it helps
Why this helps
The most common reason solar monitoring goes offline is a change to your internet: a new provider, a new Wi-Fi name or a new password. Planning the switch keeps the app reporting, so you never get the scary "not reporting" email.
  1. Before your new router or internet service arrives, write down your current Wi-Fi network name and password exactly, capital letters and all.
  2. When the new router is set up, ask the technician, or do it yourself in the router's app, to use exactly the same network name and password.
  3. If the router offers separate 2.4 GHz and 5 GHz networks, keep a 2.4 GHz network available. Several solar devices need it.
  4. The next day, open your solar app and check that today's numbers are coming in.
  5. If they aren't, use your app's reconnect steps (Enphase, SolarEdge or Tesla chapters in this guide).
Tip
Good to know
No cost. Enphase says a changed provider, network name or password is what usually causes its gateway-not-reporting message. Keeping the same name and password won't help every device, but it often saves a reconnect.
From Bill
Want a hand with any of these?
I'm happy to set up your new router so your solar keeps reporting, or walk through Storm Watch and the Backup Reserve with you. $49 remote · $99 in your home. Anything electrical goes to your installer.

Checked against Enphase homeowner pages on November 15, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

How Home Solar Works, in Plain English

A home solar system has only a few main parts. Once you can picture how energy moves from the roof to your kitchen — and sometimes out to the street — the app's pictures and graphs start to make sense.

The parts, roof to street

PartWhat it does
Solar panelsThe dark glass rectangles on your roof or in the yard. They turn sunlight into electricity. Light, not heat, is what they need — a cold, bright day can be a very good day.
InverterPanels make DC power, like a battery. Your home runs on AC power, like a wall outlet. The inverter converts one to the other. Your system has either one large inverter or many tiny ones (Microinverters, Optimizers and String Inverters).
Gateway or monitoring deviceA small box, often near your electrical panel, that collects the system's readings and sends them over your home internet to the app. Enphase calls it the IQ Gateway (older ones were called the Envoy); Tesla calls its version the Gateway.
Your electrical panelThe gray metal box with the breakers. Solar power flows in here and feeds your home. It's a box for electricians only.
Utility meterThe meter outside, from your electric company. With solar it counts power in both directions: what you buy from the grid and what you send back.
Home battery (optional)Stores extra solar power for the evening or for an outage. Home Batteries in Plain English explains them.

Where the power goes, moment to moment

  1. The sun shines and the panels make power.
  2. The inverter turns it into household power.
  3. Your home uses it first — the refrigerator, the furnace fan, the TV.
  4. If the panels make more than the house is using right now, the extra goes to your battery (if you have one) or out through the meter to the grid.
  5. If the house needs more than the panels are making — at night, or when the dryer runs — the rest comes from the battery or the grid, just as it did before you had solar.

All of that happens automatically, second by second. You don't switch anything over. Your lights don't flicker when a cloud passes; the grid simply fills in the difference.

Good to know
Most systems shut off when the power is out
A regular grid-connected solar system without a battery usually stops making power for your house during an outage, even in full sun. That's a safety design so it doesn't send power down the lines while utility crews are working on them. A home battery with backup is what changes that (Home Batteries in Plain English and When the Power Goes Out). Ask your installer exactly what your system does.
Why it helps
What this does for you
With this picture in your head, the app's animated arrows — sun to house, house to grid — stop being a mystery. You'll see your own home's story told in real time.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Microinverters, Optimizers and String Inverters

The single biggest difference between solar systems is how the inverting is done. It decides which app you use, what you see in it, and who you call. You don't need to understand the electronics — just which kind you have.

The three common setups

MicroinvertersInverter with optimizersString inverter
Where the inverting happensA small inverter under each panelOne wall-mounted inverter; a small "optimizer" under each panelOne wall-mounted inverter for the whole roof
Common brand in Ohio homesEnphaseSolarEdgeSeveral, including Tesla's solar inverter
What the app can showEach panel's outputEach panel's output (through the optimizers)Usually the whole system, not each panel
If one panel is shadedOnly that panel dropsOnly that panel dropsCan pull down a group of panels

How to tell which one you have

  1. Look at your paperwork or contract from the installer. It usually lists the inverter brand and model.
  2. Check which app the installer set up for you: Enphase, mySolarEdge or Tesla.
  3. From the ground, look at the side of the house or garage near the electric meter. A single box about the size of a small suitcase, with a brand name on it, is often a central inverter. Look only — don't open it.
  4. If you're still not sure, call your installer and ask, "What inverter brand and model do I have, and which app should I use?" Write the answer on the Cheat-Sheet in Your Home Solar Cheat-Sheet.
Tip
The plain-English words
A microinverter is a tiny inverter for one panel. An optimizer is a small box under a panel that tunes its output and reports on it, but leaves the inverting to the big box on the wall. A string is simply a group of panels wired together in a row.
Why it helps
What this does for you
Knowing your system type tells you which chapters of this guide are yours: The Enphase App section for Enphase, The SolarEdge App section for SolarEdge, The Tesla App: Solar and Powerwall section for Tesla. You can skip the others with a clear conscience.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Who Does What: You, Your Installer, Your Utility

Solar involves more people than most home technology. Knowing who handles what saves you phone calls — and keeps you safe.

Yours to handle (no tools needed)

Your installer's job

  • Anything on the roof: panels, wiring, microinverters, optimizers, leaks around mounts.
  • Anything inside the inverter, gateway, battery or electrical panel.
  • Error codes or faults that the app says need service.
  • Warranty claims for the equipment they installed (Warranties and Paperwork).
  • Telling you where the system's shutoff switches are, and what they're for.

Your utility's job

Safety
Shutoff switches and breakers
Most systems have a shutoff switch or rapid shutdown switch. Your installer should show you where it is and explain when emergency responders might use it. That's all you need to know about it. Don't flip breakers or switches to "reset" your solar — call your installer, and if you ever smell burning or see smoke or sparks, get out and call 911.
Good to know
If your installer has gone out of business
It happens. The equipment maker's support line (Enphase, SolarEdge or Tesla) can usually help you find another certified installer in the area. A licensed electrician can also help with electrical problems.
Why it helps
What this does for you
When something seems off, you'll know in one breath whether it's a Wi-Fi job for you (or me), an equipment job for the installer, or a bill question for the utility.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Reading the Numbers

kW and kWh: The Two Numbers That Matter

Every solar app shows two kinds of numbers, and they're easy to mix up. One is about right now. The other is about how much, over time. Get these two straight and the rest of the app is easy.

kW: how fast, right now

A kilowatt (kW) is 1,000 watts. It tells you how much power is flowing at this moment — like the speedometer in your car. When the app says your panels are making 3.2 kW, that's the rate at this instant. It changes all day as the sun moves and clouds pass.

kWh: how much, over time

A kilowatt-hour (kWh) is an amount of energy — like the odometer, or the gallons in the tank. Making 1 kW for one hour gives you 1 kWh. Your electric bill charges you by the kWh, and your app's daily, monthly and lifetime totals are in kWh.

You'll seeWhat it means
kW (kilowatts)The rate right now. Look for it on the live or "now" screen.
kWh (kilowatt-hours)The amount over a day, month or year. Look for it on history graphs and your bill.
MWh (megawatt-hours)1,000 kWh. Some apps show lifetime totals this way.
System size (kW)The size printed on your contract, such as "8.4 kW." It's the most the panels could make in ideal test conditions. Real-world output is usually lower.
Tip
A handy way to remember
kW is the speed. kWh is the distance. Your bill, like a road trip, cares about distance.
Good to know
Why your system rarely hits its "size"
An 8 kW system almost never shows 8 kW in the app. Heat, the angle of the sun, wiring and inverter losses all take a little. Seeing a peak somewhat below the system size on a bright day is normal. Your installer can tell you what peak to expect from your roof.
Why it helps
What this does for you
You'll read your app correctly the first time, and you'll be able to compare it with your electric bill without getting tangled in the units.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Reading the Numbers

Production, Consumption and the Grid

Your app may show up to four flows of energy. Here's what each one means and why some homes see only one of them.

LabelMeaning
Production (Solar)What your panels made.
Consumption (Home)What your house used, from any source.
Grid importWhat you bought from the electric company.
Grid exportExtra solar you sent out to the grid. Your utility credits it (Net Metering and Your Ohio Electric Bill).
BatteryWhat went into or came out of your home battery, if you have one.
NetProduction minus consumption. A positive net means you made more than you used.

Why you might see production only

To show how much your house uses, the system needs extra measuring sensors installed in your electrical panel, usually called consumption meters or CTs (current transformers). Some systems were installed without them. In that case, the app shows what the panels made but not what the house used. Adding consumption monitoring is an installer job, done inside the panel.

Good to know
Not sure whether you have consumption monitoring?
If your app shows only a solar or production number and never a "home" or "consumption" number, you probably don't have it. Ask your installer whether it was included and what adding it would involve. It's their job, not yours.

Reading a day, start to finish

  1. Open your app and switch to the Day view for a sunny day.
  2. Find the production curve: it rises in the morning, peaks around midday, and falls in the evening, like a hill.
  3. If you have consumption, find the home-use line. Spikes are big appliances — the dryer, the oven, a heat pump.
  4. Where production is above consumption, you were exporting. Where it's below, you were importing.
  5. Switch to the Month view to see the totals add up in kWh.
Tip
Compare with your bill, not with your neighbor
Every roof is different: direction, tilt, trees and size. The most useful comparison is your system this month against your system the same month last year.
Why it helps
What this does for you
Knowing the difference between production and consumption helps you spot real savings — like running the dishwasher or dryer midday when the panels are covering it.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Reading the Numbers

What Normal Looks Like: Ohio Seasons and Weather

Here in Northeast Ohio we get long summer days, gray Novembers, lake-effect clouds and real snow. Your solar production follows all of it. Most of the "drops" folks worry about are simply the weather and the season.

The seasons

  • Late spring and summer are your biggest months: long days and a high sun.
  • Fall production slides as days shorten and the sun sits lower in the sky.
  • December and January are usually the smallest months by far — short days, low sun, frequent clouds and snow. A winter month that's a fraction of a summer month is normal.
  • Cold and bright is good for panels. A crisp, clear February day can produce surprisingly well.

Weather and surroundings

CauseWhat it does
CloudsHeavy overcast can cut production to a small fraction of a sunny day. Thin clouds cut it less. The panels still make some power.
SnowPanels covered in snow make little or nothing until it slides or melts off. That's expected.
ShadeTrees, a chimney or a neighbor's new addition can shade part of the roof. Shade changes with the seasons as the sun moves lower in winter, and as trees leaf out in spring.
HeatVery hot days slightly lower panel efficiency. A hot July day may peak a little below a cool May day.
Dirt and pollenUsually a small effect. Rain does most of the cleaning (Cleaning, Snow and Roof Care).
Safety
Snow on the panels: let it be
Snow covering the panels for a few days is normal, and production comes back when it slides or melts off. Please don't climb a ladder, go on the roof, or reach up with a shovel or rake to clear them. A fall from an icy ladder is a far bigger risk than a few lost kilowatt-hours, and tools can scratch the glass. If snow worries you, ask your installer what they recommend for your roof.
Why it helps
What this does for you
Once you know the shape of an Ohio solar year, a low week in December won't send you to the phone. You'll save your worry for the things that really need attention.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Reading the Numbers

When Production Drops: A Calm Checklist

Something looks off in the app. Before you call anyone, take five minutes with this list. Most of the time, the answer is one of the first three items.

Work through it in order

  1. Check the weather. Was today cloudy, rainy or snowy? Look out the window at the roof from the ground.
  2. Check the date. Is it late fall or winter? Compare with the same month last year, not with July.
  3. Check whether the app is showing data at all. If the numbers stopped completely, or the app says "not reporting," "offline" or "device offline," that's almost always a Wi-Fi or internet problem — not a solar problem. Go to "Offline" or "No Data": Any Brand.
  4. Check for a single panel. On Enphase and SolarEdge, the panel view can show one panel at zero while the rest are working. Note which one and call your installer.
  5. Check for an alert. Read any message in the app. Write down the exact words or take a screenshot.
  6. Check for a power outage. Systems without a battery usually stop during an outage (How Home Solar Works, in Plain English).
  7. Still a big drop on a sunny day? Call your installer, and tell them what you found.
Safety
What not to do
Don't climb onto the roof, open the inverter or gateway, or flip breakers and switches to see if it helps. Solar wiring can carry power even when the house power is off. Equipment faults are a job for your installer or a licensed electrician.
Tip
What to tell the installer
Have this ready: your system's brand and size, the date the drop started, a screenshot of the app, any alert wording, and whether it's one panel or the whole system. You'll get a faster, clearer answer.
Why it helps
What this does for you
This checklist turns a worried phone call into a calm, useful one — or saves the call altogether.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Enphase App

Getting Into the Enphase App

If your system uses Enphase microinverters, your monitoring lives in Enphase's homeowner app. It shows how your system is performing right now and over time, down to each solar panel.

A note on the name

For years the app and website were called Enlighten (or MyEnlighten). Enphase's current materials call it the Enphase App. You'll still see the Enlighten name in older emails, on some web pages and in instructions your installer gave you. It's the same account and the same sign-in.

Getting signed in

  1. Look for an email from Enphase, sent when your system was activated. It invites you to set a password. Check your spam or junk folder if you can't find it.
  2. On your phone, open the App Store (iPhone) or Google Play (Android) and search for Enphase. Install the app published by Enphase Energy.
  3. Open it and sign in with the email address your installer used for your system.
  4. If you've forgotten the password, use the app's forgot-password link and follow the email.
  5. If no account exists in your name, call your installer. They set up the account and can add you, or send a new invitation.
Tip
Bought a house that already has Enphase?
The account is probably still in the previous owner's name. Contact Enphase support or the original installer about transferring the system to you. Have your closing date and address ready.
Watch out
Use only the official app
Install the app from Enphase Energy in your phone's app store. Don't sign in through links in unexpected texts or emails; open the app yourself instead (Fake Utility Calls, Texts and Emails).
Why it helps
What this does for you
Once you're signed in, you can check your whole system in a few seconds from anywhere — the porch, the doctor's waiting room, or a winter trip south.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Enphase App

Reading the Enphase App

Enphase's homeowner app focuses on three things: how the system is doing right now, how it did over time, and how each panel is doing. Screens change a little with app updates, but these ideas stay the same.

Live Status: right now

Live Status shows the current flow of energy in your home: what the panels are making, and — if you have consumption monitoring — what the house is using and whether you're drawing from or sending to the grid. Numbers here are in kW (kW and kWh: The Two Numbers That Matter).

History: days, months, years

  1. From the main screen, look for your energy totals for today. These are in kWh.
  2. Switch between day, week, month and year views to see how production adds up.
  3. Compare this month with the same month last year to see whether things are on track (What Normal Looks Like: Ohio Seasons and Weather).
  4. If you have consumption monitoring, compare what you made with what you used.

Panel by panel

Because each Enphase panel has its own microinverter, the app can show each panel's output on a picture of your roof. Panels in afternoon shade will look lower late in the day; that's normal. A single panel that shows nothing on a sunny day while the others are producing is worth a call to your installer.

Good to know
If a number looks odd
Give it a few minutes, close the app and open it again before you worry. A single strange reading is usually just a moment's delay in the data, not a problem on the roof.
Tip
Notifications
Look in the app's settings or your account settings for notification options, and turn on alerts for problems like a gateway that stops reporting. That way you'll hear about an outage of data without checking every day.
Why it helps
What this does for you
The panel view gives you something most homeowners never had: a way to see a problem on the roof without climbing a ladder.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Enphase App

"Gateway Not Reporting": Back on Wi-Fi

The most common Enphase message of all is that your IQ Gateway is not reporting. It sounds alarming, but Enphase says this usually happens after a change to your internet: a new internet provider, a new Wi-Fi password, or a new Wi-Fi network name. Your panels are almost always still making power. The gateway just can't send the readings to the app.

First, the simple checks

  1. Is your home internet working? Check on a phone or computer connected to your Wi-Fi.
  2. Did anything change recently — a new router, a technician visit, a new password? That's your likely answer.
  3. If your router was just restarted, give everything 15 to 30 minutes to reconnect on its own.

Reconnecting the gateway with the app

Enphase points homeowners to the reconnection steps inside the Enphase App, so follow the app's own screens. Menu names shift a little between app versions. Here's what to expect:

  1. Have your Wi-Fi network name and password written down in front of you.
  2. Stand close to the IQ Gateway with your phone — Enphase suggests within about 10 feet (3 meters).
  3. Open the Enphase App. In recent versions, the steps are under Menu > Settings > Connectivity, then Configure Wi-Fi. If yours looks different, look for the gateway's Wi-Fi or connectivity steps.
  4. The app may ask your phone to join the gateway's own small Wi-Fi network for a moment. Its name includes the last six digits of the gateway's serial number. Then you return to the app.
  5. Choose your home network and type the password carefully. Capital letters matter.
  6. When the app says it's connected, give it time. Enphase notes the "not reporting" notice can take up to about 30 minutes to clear.
Safety
If the app asks you to do something at the gateway
Some reconnection paths involve a button on the gateway, and Enphase suggests restarting the gateway once if the steps keep failing. Only press a button the official app or Enphase support tells you to press. Don't open the gateway cover, unplug wiring or flip breakers. If a restart would mean touching a breaker, that's a call to your installer or Enphase support, not a job for you.

Checked against Enphase homeowner pages on November 15, 2026.

Tip
A new router doesn't have to mean a call
If you're getting a new router, you can save trouble by giving it the same network name and password as the old one. Many devices, including some gateways, then reconnect on their own. "Offline" or "No Data": Any Brand has more.
From Bill
Happy to help with the Wi-Fi side
Reconnecting a gateway after a new router is exactly the kind of job I help with: $49 remote · $99 in your home. Anything electrical goes to your installer.
Why it helps
What this does for you
Most "my solar stopped" worries end right here, with a Wi-Fi password and five minutes.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The SolarEdge App

Getting Into mySolarEdge

If your installer put in a SolarEdge inverter, usually a gray or white box on an outside or garage wall, with small optimizers under the panels, your homeowner app is mySolarEdge.

Which SolarEdge app is the right one?

Name you may seeWhat it is
mySolarEdgeThe homeowner app. This is the one to install. It shows your production, your home's use if you have consumption monitoring, a SolarEdge battery if you have one, and SolarEdge smart devices.
SolarEdge Monitoring (older app)The older app. SolarEdge has been moving homeowners off it and onto mySolarEdge. If you still have it, switch.
SolarEdge ONENot a separate app for you to find. It's SolarEdge's name for its energy-management system, which decides automatically when to use solar, battery or grid. Homeowners see and control its features through mySolarEdge.
Installer setup appsTools installers use during installation. You don't need them.

Checked against SolarEdge on November 15, 2026.

Getting signed in

  1. Look for an email from SolarEdge or your installer inviting you to set up your account. Check spam or junk if you can't find it.
  2. In the App Store or Google Play, search for mySolarEdge. Install the app published by SolarEdge.
  3. Open it and sign in with the email address your installer registered. If you've never had a password, use the app's sign-up or forgot-password option with that same email.
  4. If the app says there's no system linked to your email, call your installer. They can add you as the owner.
Tip
Bought a home with SolarEdge already on it?
The monitoring account may still belong to the previous owner or to the original installer. Ask the installer or SolarEdge to transfer the site to you. Have the inverter's serial number ready: it's printed on a label on the side of the inverter, which you can read without opening anything. A photo from a step away works well.
Why it helps
What this does for you
With the right app and your own login, you can check the system from your phone and get alerts in your own name, instead of relying on the previous owner or a salesperson.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The SolarEdge App

Reading the mySolarEdge App

mySolarEdge opens on a picture of your home's energy: where it's coming from and where it's going right now. Below that are your totals and history. Screens change with updates, but the ideas stay the same.

The main screen

  • Solar: what the panels are making right now, in kW.
  • Home: what the house is using, if your system has consumption monitoring (Production, Consumption and the Grid).
  • Grid: whether you're buying from the grid or sending extra out.
  • Battery: if you have a SolarEdge battery, how full it is and whether it's charging or discharging.
  • Animated lines show the direction power is flowing between them.

Looking back at your history

  1. Tap the energy or history area to open the graphs.
  2. Switch between day, week, month and year. Totals are in kWh.
  3. Pick the same month from last year to compare like with like (What Normal Looks Like: Ohio Seasons and Weather).
  4. If you have consumption monitoring, look at how much of what you used came from your own panels.

Panel by panel

Because each panel has an optimizer, SolarEdge can show each panel's output on a layout of your roof, if your installer set that layout up. A panel in morning or afternoon shade will look lower at those times. One panel that stays at zero on a bright day while its neighbors are working is worth a call to your installer.

Tip
Turn on notifications
When your phone asks whether mySolarEdge may send notifications, say yes. That way you'll hear about a communication problem or an alert without opening the app every day.
Good to know
SolarEdge ONE features
Newer SolarEdge systems with a battery and smart devices may show SolarEdge ONE features, such as automatic battery decisions or EV charger control, inside mySolarEdge. What you see depends on the equipment you have. If you're not sure what's switched on, ask your installer.
Why it helps
What this does for you
A minute with the main screen tells you whether the sun is paying for what you're running right now — handy when you're deciding whether to start the dryer.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The SolarEdge App

SolarEdge Offline: Back on Wi-Fi

If mySolarEdge suddenly shows no new data, or says the system isn't communicating, the most common reason is a change to your home internet: a new router or modem, a new provider, or a new Wi-Fi password. The panels keep making power; the inverter just can't report it.

First, the simple checks

  1. Is your internet working on your phone or computer at home?
  2. Did anything change recently — a new router, a technician visit, a new password?
  3. If the router was just restarted, give everything 15 to 30 minutes to reconnect.

Reconnecting with the app

Installers' help pages describe a reconnection path inside mySolarEdge for many inverters. Your screens may differ by model, so follow what the app shows you.

  1. Write down your Wi-Fi network name and password.
  2. Stand near the inverter with your phone.
  3. In mySolarEdge, look for the inverter communication or Wi-Fi option.
  4. The app may ask your phone to join the inverter's own temporary Wi-Fi network. Allow it.
  5. Tap Configure (or similar), choose your home network, type the password and tap Join.
  6. The inverter should then reconnect to your home Wi-Fi. Give the data time to start flowing again.
Good to know
2.4 GHz Wi-Fi
Installer guides say SolarEdge inverters use the 2.4 GHz Wi-Fi band. Many routers broadcast 2.4 GHz and 5 GHz under one name, which usually works fine. If it won't connect, your router may need a separate 2.4 GHz network name. That's a router setting, and it's the kind of thing I help with.

Checked against Palmetto Help Center on November 15, 2026.

Safety
If the steps point you to the inverter's switch
Some SolarEdge inverters have a switch or button on the box itself that's used during setup. Because that switch also turns the inverter on and off, I'd rather you not touch it on your own. If the app's steps lead there, stop and call your installer or SolarEdge support; they can walk you through it or do it for you. Never open the inverter or touch its wiring.
Tip
What to have when you call SolarEdge or your installer
Your router's brand and model, your inverter's serial number (from the label, read from a step away), when the data stopped, and anything that changed with your internet around then.
Why it helps
What this does for you
Most "SolarEdge stopped working" scares are really "my Wi-Fi changed." Knowing that saves you a worried evening and, often, a service call.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Tesla App: Solar and Powerwall

Tesla Solar and Powerwall in the Tesla App

Tesla uses one app for everything it makes: cars, solar and Powerwall batteries. If you have Tesla solar or a Powerwall, your home shows up in the Tesla app as an energy site. You don't need to own a Tesla car.

Getting signed in

  1. In the App Store or Google Play, search for Tesla and install the app published by Tesla.
  2. Sign in with the Tesla account your system was registered to. Often that's the email you gave the installer or Tesla when you ordered.
  3. If you forgot the password, use the app's forgot-password option.
  4. If you sign in and don't see your home, the system may be under someone else's account. Call your installer or Tesla support to have it added to yours.

The energy home screen

Open the app and choose your home if you have more than one Tesla product. The energy screen shows a picture of your home with power flowing between four places:

TileWhat it shows
SolarWhat your panels are making right now, in kW.
PowerwallHow full the battery is (as a percentage) and whether it's charging or powering the house.
HomeWhat your house is using right now.
GridWhether you're buying power or sending extra out. During an outage, it shows the grid is down.

Tap the tiles or the history area to see totals for the day, week, month and year in kWh. As with any solar app, compare a month with the same month last year (What Normal Looks Like: Ohio Seasons and Weather).

Watch out
Tesla texts and emails
Be careful with messages that claim to be from Tesla and ask you to sign in, pay, or "confirm" your account from a link. Open the Tesla app yourself instead. Fake Utility Calls, Texts and Emails covers these.
Why it helps
What this does for you
One glance tells you how full your Powerwall is and whether the sun is covering your home — the two things that matter most before a storm.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Tesla App: Solar and Powerwall

Powerwall Settings: Backup Reserve and Modes

The Tesla app gives owners a few settings for the Powerwall. These are owner-safe: they're made to be changed from your phone, and you can change them back any time. The most important one is the Backup Reserve.

Backup Reserve, in plain English

Your Powerwall's stored energy is split into two portions. The Backup Reserve is the part kept aside for an outage. The rest is used day to day by the mode you've chosen, for example to run the house in the evening on stored solar. A higher reserve means more saved for an outage and less used for everyday savings.

Changing the Backup Reserve

  1. Open the Tesla app and go to your energy home screen.
  2. Tap Settings, then Powerwall.
  3. Move the Backup Reserve slider to the percentage you want.
  4. Leave the screen. The change takes effect on its own.
Good to know
What Tesla says about the numbers
Tesla shows a "Low Backup Reserve" indicator if you set the reserve below 20 percent, because there may not be enough energy for a long outage. Setting it to 100 percent keeps the battery full for outages but stops the everyday modes from using it, so you lean more on the grid. Tesla also suggests raising the reserve ahead of an expected outage if Storm Watch hasn't already kicked in.

Checked against Tesla Support on November 15, 2026.

The everyday modes

SettingWhat it does
Self-PoweredStores extra solar during the day and uses it to power the house later, so you buy less from the grid.
Time-Based ControlUses the battery around your utility's rate schedule, if your electric plan charges different prices at different times of day. If your plan charges the same price all day, ask your installer whether this mode does anything for you.
Storm WatchWhen severe weather is forecast for your area, the Powerwall charges up so it's ready for an outage. You can turn it on in the app's settings. The Easier chapter shows how.

Checked against Tesla Support on November 15, 2026.

Safety
Settings in the app only
Everything in this chapter happens on your phone. Don't turn the Powerwall's own switch off or on, or flip any breaker, to "reset" it. If the app shows a fault or says the Powerwall needs service, call your installer or Tesla support.
Tip
Not sure what to choose?
If outages worry you more than the last few dollars of savings, a higher reserve is a perfectly sensible choice. If you rarely lose power, a lower reserve may save more. There's no wrong answer, and you can change it any time.
Why it helps
What this does for you
One slider lets you decide how much of your battery is saved for a storm, instead of leaving it to a default you never chose.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Tesla App: Solar and Powerwall

Powerwall Offline: Back on Wi-Fi

If the Tesla app says your Powerwall or Gateway is offline or shows old numbers, the usual cause is the same as with other brands: a new router, a new provider or a new Wi-Fi password. The battery and solar keep working; the app just can't hear from them.

First, the simple checks

  1. Is your home internet working on your phone or computer?
  2. Did anything change recently with your Wi-Fi or internet provider?
  3. If you just restarted the router, wait 15 to 30 minutes. Systems often reconnect on their own.

Reconnecting with the Tesla app

Tesla's steps differ a little by equipment. Follow what your app shows you.

  1. Write down your home Wi-Fi name and password.
  2. Stand near the Powerwall and Gateway with your phone, unless your system still has a cellular or wired connection (then the app may let you do this from anywhere).
  3. Open the Tesla app and choose your home energy site.
  4. For Powerwall 3, Tesla says you can tap Device Offline on the energy home screen. For other systems, go to Settings and tap Configure Wi-Fi near the bottom.
  5. If the app asks your phone to join a Wi-Fi network starting with TEG-, accept it. That's the system's own short-range network.
  6. Choose your home network, type the password and connect. Tesla says it may take up to five minutes.
Good to know
2.4 GHz and signal strength
Tesla's troubleshooting notes say Powerwall connects to 2.4 GHz Wi-Fi, not 5 GHz, and that the signal where the equipment sits should be at least two or three bars. A garage or basement far from the router can be the real problem. A Wi-Fi extender or mesh system near the equipment often fixes it — that's a Wi-Fi job, not an electrical one.

Checked against Tesla Support on November 15, 2026.

Safety
What not to do
Tesla's own troubleshooting mentions resetting the Gateway or Powerwall if the steps fail. Leave that to your installer or Tesla support unless the app itself walks you through it on screen. Don't open the Gateway, flip breakers or turn the Powerwall's switch off and on.
From Bill
The Wi-Fi side is my side
Weak Wi-Fi in the garage, a new router, a mesh system that won't play nicely — I'm glad to sort those out so your Powerwall stays online. $49 remote · $99 in your home.
Why it helps
What this does for you
Keeping the Powerwall online means the app can show you what's happening at home, and features like Storm Watch can do their job.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Batteries, Outages, Bills & Warranties

Home Batteries in Plain English

A home battery is a large rechargeable battery mounted on a wall or the floor, usually in the garage or basement. Tesla's is the Powerwall; Enphase and SolarEdge make their own batteries too. It does two jobs.

Job one: saving solar for later

On a sunny day your panels often make more than the house is using. A battery stores that extra and lets the house use it in the evening, instead of sending it all out to the grid.

Job two: backup in an outage

If your system was installed with backup, the battery can keep some or all of your home running when the grid goes down, and on many systems the panels can recharge it during the day while the outage lasts. Without a battery set up for backup, most solar systems shut off in an outage (How Home Solar Works, in Plain English).

The numbers that describe a battery

TermMeaning
Capacity (kWh)How much energy it holds — the size of the tank. More kWh, longer backup.
Power (kW)How much it can deliver at once. This decides how many big things it can run together, like a well pump and a microwave.
State of charge (%)How full it is right now. The app shows this.
Backup reserve (%)The part saved for outages (Powerwall Settings: Backup Reserve and Modes).

Whole-home or some circuits?

Some installations back up the whole house. Others back up only certain circuits — often the refrigerator, furnace fan, some lights and outlets, the internet — on a separate small panel. This was decided when the system was designed, and it's the most important thing to know before an outage. Ask your installer, and write the answer on your Cheat-Sheet (Your Home Solar Cheat-Sheet).

Watch out
Adding a battery later
Adding a battery to an existing solar system is an electrical project with permits, utility paperwork and costs that vary a lot. Get more than one written quote from licensed installers, and be wary of anyone who pressures you to sign the same day (Solar Sales Pitches and "Free Solar" Scams).
Good to know
Portable power stations are different
A portable power station is a smaller battery you plug things into directly. It isn't wired to the house. Our separate Portable Power Stations guide covers those.
Why it helps
What this does for you
Knowing what your battery backs up, and for roughly how long, lets you plan an outage calmly instead of guessing in the dark.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Batteries, Outages, Bills & Warranties

When the Power Goes Out

What happens in an outage depends entirely on whether you have a battery set up for backup. Here's what to expect, and what to do.

If you have solar but no battery

  • Your solar system usually shuts off, even in bright sun. That's a safety design to protect line workers.
  • When the grid comes back, the system restarts on its own after a short wait. You don't need to do anything.
  • Report the outage to your electric company as usual.

If you have a battery with backup

  1. The battery takes over by itself. Many homes barely notice; on some, the lights blink.
  2. Open your app. It should show the grid as down and the battery powering the home.
  3. Check the battery percentage, and look at the home-use number to see how fast you're using it.
  4. Go easy on big users that aren't essential: the electric oven, the dryer, space heaters, an electric car charger. The battery lasts much longer that way.
  5. On sunny days, many systems recharge the battery from the panels during the outage. Cloudy or snowy days won't add much.
  6. Report the outage to your electric company — your battery doesn't tell them.
Safety
Generators and solar batteries
Never plug a portable generator into a wall outlet or try to connect one to the house yourself. Connecting a generator to a home with solar and batteries needs equipment and a design a licensed electrician or your installer has approved. Run any generator outdoors, far from windows and doors. Our Home Generators & Transfer Switches guide has more.
Tip
Your app may need the internet
If your internet modem and router aren't on backed-up circuits, your phone may not be able to see the system from home during an outage. Using cell data instead of Wi-Fi usually helps — if the system itself is still online through another connection. Don't worry if the app goes quiet; the battery still works.
Good to know
Medical equipment
If someone at home depends on oxygen, a CPAP or other powered medical equipment, don't count on solar or a battery alone. Ask your doctor and your electric company about their programs for customers who rely on medical equipment, and have a backup plan.
Why it helps
What this does for you
Knowing what to expect means an outage is an inconvenience, not a crisis — and you'll make the battery last.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Batteries, Outages, Bills & Warranties

Getting the Most from Your Panels

You don't need to change your life around your solar. A few easy habits, guided by your app, help you use more of your own power.

Small habits that help

  • Run big appliances when the sun's up. On a sunny day, start the dishwasher, washing machine or dryer late morning to mid-afternoon, when the panels are near their peak.
  • Look before you start. Open the app's live screen. If Solar is well above Home, you've got power to spare.
  • Use delay-start buttons. Many dishwashers and washers have them. Set them to finish in the early afternoon.
  • Keep trees trimmed. If branches have grown to shade the panels, call a tree service for anything near the roof or power lines. Don't climb up yourself.
  • Keep the monitoring online. Your app can only warn you of problems if it can report ("Offline" or "No Data": Any Brand).

A simple monthly check

  1. Once a month, open your app and switch to the month view.
  2. Compare this month's production with the same month last year.
  3. If it's close, you're done. If it's well below on a month with similar weather, look for a single panel at zero or an alert, then call your installer (When Production Drops: A Calm Checklist).
  4. Write the month's kWh on a calendar if you like. Over a year or two you'll know your system's rhythm.
Tip
Don't chase every kilowatt-hour
Whether you save a little more by shifting a load depends on how your utility credits extra solar (Net Metering and Your Ohio Electric Bill). The monthly check matters more than any single habit.
Why it helps
What this does for you
Five minutes a month tells you the system is healthy, so you can stop wondering and enjoy it.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Batteries, Outages, Bills & Warranties

Net Metering and Your Ohio Electric Bill

When your panels make more than the house is using, the extra goes out to the grid. Net metering is the arrangement where your electric company gives you credit for it. Here's the general picture in Ohio. The exact terms are set by your own utility, so treat this as a starting point, not the final word.

The general Ohio picture

  • Under rules from the Public Utilities Commission of Ohio (PUCO), the state's regulated electric utilities must offer a net metering arrangement to customers with their own solar, even if you buy your generation from a competitive supplier.
  • The system has to be at your home and sized mainly to cover your own use.
  • Your meter must be able to count power in both directions; the utility handles the meter.
  • Under the current PUCO rules, credit for extra power you send out is based on the energy-only part of the utility's standard price, not the full price per kWh you pay. So a kWh you send out is usually worth less on your bill than a kWh you avoid buying.
  • That credit is applied to your bill and can carry forward from month to month.

Checked against PUCO net metering rules on November 15, 2026.

Good to know
Rules can change, and your utility has the details
Net metering rules have been revised and challenged more than once in Ohio. If you get your power from a co-op or a city-owned utility, it sets its own policy. Call the customer service number on your bill and ask for their net metering or customer-generator information.

Reading your bill

  1. Find the meter readings or usage section. A net-metered bill often shows power delivered to you and power received from you, or a single net number.
  2. Look for a line about a net metering or generation credit, and any credit carried forward.
  3. Compare the bill's numbers with your app's grid import and export for the same dates, if your app shows them. They won't match exactly, because billing periods and meter readings differ, but they should be in the same neighborhood.
  4. If something seems far off, call your utility first. They own the meter and the bill.
Watch out
Why summer can help winter
Because credits may carry forward, a big summer can help with smaller winter months. Ask your utility how long credits carry and what happens to any left over at the end of their cycle.
Safety
Not financial or legal advice
I'm explaining the general idea so your bill makes sense. For questions about tax credits, loans, leases or contracts, talk with a tax professional, your lender or an attorney.
Why it helps
What this does for you
Understanding net metering explains why using your own solar at midday often saves more than sending it out, and why your bill doesn't drop to zero even in a great month.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Batteries, Outages, Bills & Warranties

Warranties and Paperwork

A solar system is meant to last a long time, and so are its warranties. The trouble is that the paperwork gets scattered. Here's what to gather, once, so you can find it on the day you need it.

The kinds of warranty you may have

WarrantyWhat it covers
Panel product warrantyCovers defects in the panels themselves.
Panel performance warrantyPromises the panels will still produce a stated share of their original output after a number of years.
Inverter / microinverter / optimizerFrom Enphase, SolarEdge, Tesla or another maker. Lengths vary by product and date.
BatteryOften stated in years and a minimum remaining capacity.
Installer workmanshipFrom the company that installed it: covers their work, like roof penetrations, leaks and wiring. Length varies a lot between companies.

Exact lengths and terms depend on your specific equipment and contract, so read your own documents rather than going by what a neighbor or an ad says.

Build your solar folder

  1. Find the contract or purchase agreement, and the final invoice.
  2. Find the warranty documents for panels, inverter(s), battery and the installer's workmanship warranty.
  3. Write down the installer's name, phone number and website, and the date the system was turned on.
  4. Note the equipment brands and model numbers. Your app's settings or system information screen often lists them.
  5. Keep any permit, inspection or utility approval letters.
  6. Put it all in one folder, paper or digital, and tell a family member where it is.
Tip
If you sell the house
Buyers will ask about the system, its warranties and its monitoring account. Having the folder ready makes that easy. If you have a lease or loan, read its transfer terms early, and talk to the company holding it.
Watch out
Don't void your warranty
Having someone other than a qualified installer work on the system, or opening equipment yourself, can put a warranty at risk. Another good reason to leave the equipment to the pros.
Why it helps
What this does for you
When something does fail, one phone call with the right paperwork in hand can get it fixed under warranty instead of at your expense.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Care and Troubleshooting

Cleaning, Snow and Roof Care

Solar panels need very little care. In Ohio, rain and snowmelt do most of the cleaning. The main thing you need to know is what not to do.

Cleaning

  • A little dust or pollen usually costs only a small amount of production. Rain rinses most of it off.
  • If your monthly check (Getting the Most from Your Panels) shows a real drop and you can see heavy dirt, bird droppings or leaves from the ground, call your installer and ask whether cleaning is worth it and who they recommend.
  • Ask before hiring any cleaning service. Some cleaning methods, chemicals or pressure washers can damage panels or affect the warranty (Warranties and Paperwork).

Snow

  • Snow-covered panels make little or nothing. That's normal and temporary.
  • Panels are dark and slick, so snow often slides off within a day or two of sunshine.
  • Snow sliding off can land in a heap below the roof edge. Keep walkways and parked cars out of the way.
Safety
Stay off the roof and off the ladder
Please don't climb on the roof, go up a ladder, or use a roof rake, hose or brush to reach the panels. Roofs are slippery, panels carry electricity whenever light hits them, and falls are a serious risk at any age. Everything on the roof is a job for your installer or a professional they recommend.

What to watch for, from the ground

If you seeWhat to do
A loose or sagging panel, or a hanging wireKeep people away and call your installer right away.
A water stain on a ceiling under the panelsCall your installer; it may be a roof penetration issue covered by their workmanship warranty.
Animals nesting under the panelsCall your installer about critter guards. Don't reach under the panels.
Tree branches touching or shading panelsCall a tree service. Anything near power lines goes to the utility.
Burning smell, smoke or sparks from any equipmentLeave the area and call 911, then your installer.
Tip
Need a roof repair?
If you're having the roof repaired or replaced, the panels may have to come off and go back on. Talk to your installer before the roofer starts; it's a job for people who know solar.
Why it helps
What this does for you
You keep the system healthy and keep yourself safe, without ever leaving the ground.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Care and Troubleshooting

"Offline" or "No Data": Any Brand

"System not reporting." "Device offline." "No data." Every brand words it a little differently, but the story is nearly always the same: the monitoring box lost its internet connection. Your panels usually keep making power the whole time. Here's a plan that works for any brand.

Step one: is it the internet or the solar?

  1. Check your home internet on a phone or computer connected to your Wi-Fi.
  2. Look at the app: if it shows no new data at all, that's a connection problem. If it shows data but low numbers, that's a production question (When Production Drops: A Calm Checklist).
  3. Think back: a new router, modem, internet provider, Wi-Fi password, or a long power outage? Any of these can knock the monitoring offline.

Step two: give it time

After a router restart or a power blip, give the system 15 to 30 minutes, and sometimes a bit longer, to find the network again. Many reconnect on their own.

Step three: use your brand's official reconnect steps

BrandWhere to goDetails in
EnphaseEnphase App: Menu > Settings > Connectivity > Configure Wi-Fi (names may vary)"Gateway Not Reporting": Back on Wi-Fi
SolarEdgemySolarEdge: the inverter communication or Wi-Fi optionSolarEdge Offline: Back on Wi-Fi
TeslaTesla app: Device Offline (Powerwall 3) or Settings > Configure Wi-FiPowerwall Offline: Back on Wi-Fi

Step four: if it still won't connect

  • Check that your router offers a 2.4 GHz network. Several monitoring devices need it.
  • Check the signal where the equipment is. A garage or basement far from the router may need a Wi-Fi extender or mesh point nearby.
  • If your monitoring box was connected by a network cable or cellular, the installer set that up; call them.
  • Call the maker's support line or your installer. Have your router model and the system's serial number ready.
Tip
Getting a new router? Plan ahead
Before the old router goes, write down its network name and password. Give the new router exactly the same name and password, capital letters and all. Many solar gateways and smart devices then reconnect without any fuss. Enphase notes that changing your provider, network name or password is what usually triggers "not reporting."

Checked against Enphase homeowner pages on November 15, 2026.

Safety
Wi-Fi only
None of these steps involve opening equipment, unplugging wiring or flipping breakers. If a fix seems to need that, it belongs to your installer or a licensed electrician.
From Bill
A very common call
Getting solar monitoring back online after a new router is one of the most common jobs I see for solar homes, because it's really a Wi-Fi job. $49 remote · $99 in your home.
Why it helps
What this does for you
Instead of worrying that your expensive system is broken, you'll know it's almost always a five-minute Wi-Fi fix.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams, Help and Your Cheat-Sheet

Solar Sales Pitches and "Free Solar" Scams

Solar homes, and homes that could have solar, get a lot of sales attention: knocks on the door, phone calls, ads and mailers. Many come from honest companies. Some don't. The Federal Trade Commission (FTC) has warned that solar and clean-energy scams are rising along with solar's popularity.

Red flags the FTC warns about

  • Someone says a government program will pay the whole cost of solar panels, or that your system will be "free." The FTC calls these claims lies.
  • Someone says they're from the government, or working with it.
  • Someone says your utility already signed you up for a program, so now you have to pay or sign.
  • Pressure to sign today, on a tablet, before you've read the contract.

Checked against FTC Consumer Advice on November 15, 2026.

Loans and financing at the kitchen table

The Consumer Financial Protection Bureau has raised concerns about door-to-door sales where the salesperson signs you up for the solar system and a loan from their lender partner at the same time. A solar loan or lease is a long, serious commitment, and it can affect selling your home later. Never sign one on the spot.

How to handle a pitch

  1. Don't sign anything, and don't share your electric bill, account number or Social Security number at the door.
  2. Ask for the company name, the salesperson's name and a printed proposal. A real company will leave one.
  3. Close the door. Look the company up yourself and read reviews from several places.
  4. Get quotes from more than one licensed, established installer before deciding anything.
  5. Have a trusted family member, or an attorney for a big contract, read it before you sign.
  6. If someone lied to you or pressured you, report it at ReportFraud.ftc.gov.
Scam alert
"Free solar" and "government program" pitches
If someone says the government will pay for your solar, that it's free, or that your utility already enrolled you, it's a scam. Say "no, thank you," close the door or hang up, and report it at ReportFraud.ftc.gov.
Good to know
Already have solar? You'll still get pitches
Sellers may offer you batteries, "upgrades," cleaning contracts or "inspections." Check with your own installer first. They know your system and your warranty.
Tip
If you already signed and regret it
Federal rules generally give you a short window to cancel many sales made at your home. Look at your contract for a cancellation notice, act quickly, and put your cancellation in writing. For anything beyond that, the Ohio Attorney General's consumer protection office or an attorney can advise you.
Why it helps
What this does for you
Knowing the script ahead of time lets you say no calmly — and protects your home from a contract you never really wanted.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams, Help and Your Cheat-Sheet

Fake Utility Calls, Texts and Emails

Solar homeowners get the same fake "utility" calls as everyone else, plus a few with a solar twist. The fix is always the same: hang up, and call back on a number you trust.

Common versions

  • "Your power will be shut off today unless you pay now" — often by gift card, payment app or cryptocurrency.
  • "Your solar credit or rebate is ready; we just need your account number."
  • "We need to inspect your solar meter" from someone at the door who can't show ID.
  • An email or text that looks like Enphase, SolarEdge or Tesla, asking you to sign in from a link or "verify" a payment.

What the real utility does

FirstEnergy, the parent company of Ohio Edison, says it sends written disconnection notices, doesn't call or email demanding immediate payment to avoid a same-day shutoff, never requires prepaid cards, and that its employees carry photo ID. If your power comes from a different utility, look at its own scam page.

Checked against FirstEnergy on November 15, 2026.

What to do

  1. Hang up, or don't answer the door. You won't offend a real utility.
  2. Find the phone number on your printed bill or the utility's real website, and call it yourself.
  3. For solar app emails or texts, don't tap the link. Open the official app on your phone and check there.
  4. If you shared a password, change it in the official app right away. If you shared card or bank details, call your bank.
  5. Report the scam at ReportFraud.ftc.gov.
Scam alert
"Pay now or we'll cut your power"
A real utility won't demand gift cards, payment-app transfers or cryptocurrency, and won't threaten a same-day shutoff by phone. Hang up and call the number on your bill.
Scam alert
Fake solar-app emails
A message that looks like it's from your solar company and asks you to sign in from a link may be a phishing attempt. Open the Enphase, mySolarEdge or Tesla app yourself instead of tapping the link.
Why it helps
What this does for you
One simple rule, "hang up and call the number I trust," protects you from nearly every version of this scam.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams, Help and Your Cheat-Sheet

When to Call Bill

I've written this guide so you can live with your solar system confidently on your own. Part of being helpful is being honest about when a hand saves time and worry, and about what I don't do.

Times it's well worth a call

What I don't do

I don't do electrical work. Panels, wiring, inverters, gateways, batteries, breakers, disconnects and anything on the roof belong to your solar installer or a licensed electrician. I'm glad to help you get your questions ready for them, and to take care of the app and Wi-Fi side afterward.

What working with me is like

I work at your pace — no rushing, no talking down, no jargon. I explain what I'm doing in plain words, and I'll always tell you honestly when something isn't worth the money. Home visits are here in Portage County, Ohio; remote help reaches you wherever you are. I've been doing this work for more than 30 years.

From Bill
How to reach me
Call (330) 200-8042, or book a time at billshometech.com/book. My help is $49 remote · $99 in your home. This guide is free to read and share with family and neighbors.
Good to know
You may be greeted by Sophie
When you call or visit billshometech.com, you might first meet Sophie, my AI receptionist. She can answer quick questions and help you book a time. The actual help always comes from me.

Thank you for taking the time to understand your solar. It's a big investment, and you deserve to feel at home with it.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams, Help and Your Cheat-Sheet

Your Home Solar Cheat-Sheet

Keep a copy of this with your solar folder. The whole guide, boiled down.

The essentials

Remember
kWHow much power right now. The speedometer.
kWhHow much energy over time. The odometer, and what your bill counts.
Production / consumptionWhat the panels made / what the house used.
WinterShort days, low sun and snow. Small December and January numbers are normal.
"Offline" / "not reporting"Almost always Wi-Fi. Use the app's reconnect steps ("Offline" or "No Data": Any Brand).
Outage, no batterySolar usually shuts off. It restarts on its own when the grid returns.
Outage, with batteryBattery takes over. Go easy on big appliances. Report the outage.
Backup Reserve (Tesla)Settings > Powerwall, slider. Below 20 percent shows a warning.
Snow and cleaningStay off the roof. Let snow melt. Ask the installer about cleaning.
"Free solar" / government pitchA scam. Report at ReportFraud.ftc.gov.
Electrical anythingYour installer or a licensed electrician. Never open equipment or flip breakers.

Write it down once

Keep handy
System brand / inverter type____________________
System size (kW)____________________
Date turned on____________________
Monitoring app and login email____________________
Gateway / inverter serial number____________________
Battery? Whole home or some circuits?____________________
Wi-Fi network name (2.4 GHz)____________________
Installer (name and phone)____________________
Maker's support line____________________
Electric company and outage number____________________
Where my solar folder is____________________
Best month last year (kWh)____________________

When something's wrong, in order

  1. Numbers low? Check the weather, the season and snow first (What Normal Looks Like: Ohio Seasons and Weather).
  2. No data at all? Check your home internet, wait 30 minutes, then use the app's reconnect steps ("Offline" or "No Data": Any Brand).
  3. One panel at zero on a sunny day? Screenshot it and call your installer (When Production Drops: A Calm Checklist).
  4. An alert in the app? Write down the exact words and call your installer or the maker.
  5. Power out? Check the battery in the app, go easy on big appliances, and report the outage (When the Power Goes Out).
  6. Smoke, sparks or a burning smell? Get out and call 911.
  7. Wi-Fi or app trouble? Call Bill at (330) 200-8042.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
Step 1 of 5
1