What are you trying to do?
Type it in plain words — like "connect my VCR to a new TV" or "picture is black and white."
Hello, and welcome. Maybe you just brought home a beautiful new TV, carried the DVD player over from the old one, and found that the cables don't fit anywhere. Maybe there's a VCR in the closet with thirty years of birthdays and holidays on tape, and you'd like to watch them again. Or maybe the picture comes up, but it's black and white, stretched, or rolling. Whichever it is, this guide is for you.
I'm Bill. I've spent more than 30 years working with technology, and these days I help folks here in Portage County feel at home with theirs. Hooking an older player to a new TV is a very common puzzle, and the good news is that it nearly always has a simple answer once you know what the jacks are called. I wrote this guide the way I'd explain it kneeling behind your TV: patiently, in plain English, and without trying to sell you anything.
Plugging a cable into the wrong jack won't hurt your TV or your player. The worst that happens is no picture, or a strange-looking one, and you move the plug. The one thing worth a little care is a precious videotape: an old tape that's moldy or damaged should not go into a player at all. Caring for Discs, Tapes and Players explains why.
If anything in this guide leaves you unsure, call me at (330) 200-8042. There's no such thing as a silly question about the back of a TV.
Let's start with why your new TV looks so different from the old one.
— Bill
Call Bill and he'll walk you through it — or come do it for you.
A disc player connected by HDMI can do more than play discs. These three extras make movie night simpler: one remote for the TV and the player, watching the movies you bought on a phone or tablet too, and playing your saved family videos straight from a USB stick.
Checked against Samsung Support, LG Support, Roku Support and the Sony BDP-S3700 Operating Instructions on November 15, 2026.
Checked against Movies Anywhere on November 15, 2026.
Checked against Roku Support and TCL Support on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
If you turn a TV from the 1990s or 2000s around, you'll often find a whole panel of colored jacks. Turn a new one around and you may see only a few flat HDMI ports, a USB port, an antenna jack and maybe one small round hole. That isn't a mistake. TV makers have been removing the old jacks for years.
The yellow, red and white plugs are called composite (or "AV") connections. The yellow one carries the picture; the red and white carry the sound. They carry an analog signal, the kind of picture TVs used before digital TV. They're limited to standard definition, about the sharpness of an old tube TV.
Today almost everything — streaming sticks, cable boxes, game consoles, Blu-ray players — uses HDMI, a single digital cable that carries both a sharp picture and the sound. With fewer people using the old jacks, makers stopped including them so they could make TVs thinner and cheaper. Some TVs kept one small round AV in jack that needs a special adapter; many kept nothing at all.
Some older DVD players also have component video: three plugs colored green, blue and red. Component gives a sharper picture than composite, but it's analog too, and it has largely disappeared from new TVs as well. Know Your Jacks: A Field Guide shows how to tell the two red plugs apart.
Nearly every TV still has a round, threaded coax jack for an antenna or cable. That's how many VCRs used to connect, through "channel 3." It's still there, but whether the TV can still tune a VCR's old-style signal depends on the model. VCRs and the Antenna Jack (Channel 3 or 4) explains.
Checked against TCL Support (sibling check) on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
Before buying anything, take a flashlight and look at the back of your player and the back (or side) of your TV. Write down what you see. This table will help you name it.
| Name | What it looks like | Carries | Found on |
|---|---|---|---|
| HDMI | Flat, wide port, a bit like a squashed trapezoid. One plug. | Sharp digital picture and sound together | Every new TV; DVD players from the mid-2000s on; every Blu-ray player |
| Composite (AV) | Three round plugs: yellow, red, white | Yellow = picture; red and white = sound | VCRs, older DVD players, camcorders |
| Component | Three round plugs: green, blue, red (plus red and white for sound) | A sharper analog picture; no sound | Many older DVD players, some VCR/DVD combos |
| S-Video | Small round plug with four tiny pins | Picture only, a little better than yellow | Better VCRs, camcorders |
| Coax (RF) | Round, threaded jack with a thin center wire | Picture and sound together, as a TV channel | VCRs ("Out to TV"), antennas, cable |
| AV in mini jack | One small round hole, like a headphone jack, labeled AV IN | Composite, through a special breakout cable | Some newer TVs |
| Optical audio | Small square port, often glows red | Digital sound only | TVs, players, soundbars |
This is where many people get stuck. A red plug might be sound (part of the yellow-red-white set) or picture (part of the green-blue-red component set). Look at the label next to the jack on the player:
A player's jacks are marked OUT (they send the picture to the TV). A VCR or recorder may also have IN jacks for recording from something else. Always connect a player's OUT to the TV's IN. On a VCR, the coax jack marked ANT IN or IN FROM ANT is for an antenna, and OUT TO TV is the one that goes to the TV.
Call Bill and he'll walk you through it — or come do it for you.
With your notes from Know Your Jacks: A Field Guide, find your situation in this table. It points you to the chapter that walks you through it.
| Your player has | Your TV has | What to use | Chapter |
|---|---|---|---|
| HDMI | HDMI | One HDMI cable. The best picture, and the easiest. | 5 |
| Yellow-red-white only | Yellow-red-white jacks | The cable you already have. | 8 |
| Yellow-red-white only | An AV IN mini jack | The TV maker's AV breakout adapter. | 8 |
| Yellow-red-white only | HDMI only | A powered composite-to-HDMI converter box. | 9 |
| Component (green-blue-red) | HDMI only | A powered component-to-HDMI converter box. | 9 |
| Coax only (old VCR) | Coax antenna jack | A coax cable and channel 3 or 4 — if the TV can tune it. | 11 |
| A DVD/VCR combo | HDMI | Often HDMI for both, but check — some combos send tapes only over yellow. | 12 |
If your player has both HDMI and the older jacks, use HDMI. It's one cable instead of three, the picture is sharper, and many players and TVs can then work together so one remote controls both (the "Ways … Make Life Easier" topic shows how).
If you still have an older TV with all the jacks and room for it, a VCR in a spare room or bedroom with that TV is a perfectly good answer. It needs no adapters at all.
Call Bill and he'll walk you through it — or come do it for you.
If your player has an HDMI port, you're in luck. One cable carries the picture and the sound, and it plugs in only one way.
Checked against HDMI Licensing Administrator (sibling check) on November 15, 2026.
Any HDMI port will work for a disc player. If one port is labeled ARC or eARC, save it for a soundbar if you have one or might get one (Soundbars and Your Disc Player).
Call Bill and he'll walk you through it — or come do it for you.
A TV can show many things: the antenna, a cable box, a streaming stick, your DVD player. Each plugs into a different jack, called an input (some TVs say source). If the TV is on the wrong one, you'll see "No Signal" or the wrong thing entirely.
| TV | The button is usually called | Then look for |
|---|---|---|
| Samsung | Source (or the Home button, then Source) | HDMI 1, HDMI 2, or the device's name |
| LG | Input (or the Home button, then the input list) | HDMI 1, HDMI 2, AV |
| Roku TV (TCL, Hisense, others) | Home, then the input tiles on the home screen | Tiles named HDMI 1, HDMI 2, AV |
| Google TV (Sony, TCL, Hisense) | Input (a square with an arrow) or Settings | Inputs list |
| Vizio | Input | HDMI-1, HDMI-2, Comp/AV |
Button names vary from model to model, so if you don't see one of these, look for a picture of a box with an arrow going into it. Some TVs also show the list when you press the Home button.
Most TVs let you rename an input so the list says DVD or VCR instead of HDMI 2. On a Samsung TV, press Source, highlight the input, press up and choose Edit. On a Roku TV, highlight the input's tile, press the star (*) button and choose Rename input. Other TVs have a similar option in the input list or under Settings.
Checked against Samsung Support and Roku Support (sibling check) on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
A DVD or Blu-ray player has its own setup menu, separate from the TV's. When a player moves from an old tube TV to a new flat one, a couple of its settings may still be set for the old TV. That can make the picture look squeezed or boxed in.
| Setting | What to choose |
|---|---|
| TV type or screen format | Set it to 16:9 (widescreen) for any flat-screen TV. "4:3" is for old square tube TVs. |
| Output resolution | Leave it on Auto for HDMI. The player and TV agree on the best setting by themselves. |
| Audio output (digital) | If there's no sound through a soundbar or receiver, try PCM instead of Bitstream (Soundbars and Your Disc Player). |
| Control for HDMI (HDMI-CEC) | Turn it On so the TV remote can work the player. Sony calls it Control for HDMI. |
On Sony Blu-ray players such as the BDP-S3700, Control for HDMI is in the player's HDMI Settings. Sony's manual suggests turning the player off and on again after changing an HDMI connection, and switching the setting off and back on if it stops working after a power failure.
Checked against Sony BDP-S3700 Operating Instructions on November 15, 2026.
Pressing Menu or Top Menu while a disc is in brings up the disc's own menu — the one with Play Movie, Scene Selection and Special Features. Subtitles and languages for that movie are usually set there, or with the player's Subtitle and Audio buttons.
Call Bill and he'll walk you through it — or come do it for you.
If your TV still has yellow, red and white jacks, or one small round jack labeled AV IN, you can connect a VCR or older DVD player without buying a converter box. The picture will be standard definition — the same as it always was — but it will work.
Some TVs save space by sharing one set of jacks between composite and component. The picture jack is then colored green and labeled something like Y/VIDEO. In that case the yellow plug goes into the green jack, and red and white go into the audio jacks beside it. If you plug yellow into green and get a black-and-white picture, see Black and White, Rolling or Flickering.
Some newer TVs have a single small round jack, about the size of a headphone jack, labeled AV IN. It needs a short breakout adapter: a mini plug on one end and yellow, red and white jacks on the other. Your old cable plugs into those jacks.
Checked against TCL Support (sibling check) on November 15, 2026.
Many older VCRs are mono: they have one white or yellow-ringed audio jack instead of red and white. Plug that into the TV's white (left) audio jack. Most TVs then play it from both speakers; if yours plays it from only one side, an inexpensive "Y" splitter cable that feeds one plug into both red and white fixes it.
Call Bill and he'll walk you through it — or come do it for you.
If your new TV has only HDMI ports, a VCR or older DVD player needs a small converter box. It takes the old analog signal and turns it into digital HDMI. This is the adapter that actually works, and for most families it's the answer.
Checked against TCL Support (sibling check) on November 15, 2026.
The converter can't add detail that was never on the tape. A VHS tape on a big new TV will look soft and a bit fuzzy, just as it did on the old TV, only bigger. That's normal. Sitting a little farther back helps, and so does setting the TV's picture size to show the tape's original square shape (Stretched, Squeezed or Boxed In).
Call Bill and he'll walk you through it — or come do it for you.
Online stores are full of cables that have an HDMI plug on one end and yellow, red and white plugs on the other, with nothing in between. They look like exactly what you need. For a VCR or older DVD player going into a new TV, they can't work.
Yellow-red-white carries an analog signal; HDMI carries a digital one. Changing one into the other takes a small computer chip and power — that's what the converter box in Converter Boxes: The Adapter That Works is. A plain cable has no chip and no power, so the TV simply sees nothing and says No Signal. The player isn't broken, and neither is the TV.
Call Bill and he'll walk you through it — or come do it for you.
Years ago, many people connected a VCR with a single round coax cable, and watched tapes on channel 3 or channel 4. The VCR made its own little TV channel. Every new TV still has an antenna jack, so it's natural to try this again — but it often doesn't work any more.
The VCR sends an old-style analog channel. Over-the-air TV went digital years ago, and newer TVs are built for digital channels. Some still include the older analog tuner that can find a VCR on channel 3; many newer models don't, and they'll never find the VCR's channel however you scan.
Even when channel 3 works, the picture is usually worse than yellow-red-white. If your VCR has a yellow VIDEO OUT jack, use Connecting with Yellow, Red and White and Converter Boxes: The Adapter That Works instead. Almost every VCR made after the early 1990s has one.
Call Bill and he'll walk you through it — or come do it for you.
A combo player plays both DVDs and tapes in one box. They were popular, and many families still have one. They're also the best way to keep watching tapes, because new VCRs are no longer made: the last company making them, Funai of Japan, stopped production in July 2016.
Checked against Associated Press and Fortune reports, July 2016 on November 15, 2026.
Some combos can also record a tape onto a blank DVD. That was once the most popular way to save home movies. If you have one that still works, it can still do the job — use blank discs of the type the manual lists, and finalize each disc when it's done (an option in the recorder's menu), or it won't play in other players. Doing It Yourself covers more modern ways to save tapes.
Call Bill and he'll walk you through it — or come do it for you.
"No Signal" means the TV is looking at an input where nothing is coming in. It's the most common message of all, and it's almost never a broken player. Work down this list in order.
If you see the player's logo or setup menu but a disc won't start, the connection is fine and the problem is the disc. Discs That Won't Play: Region Codes and More covers discs that won't play.
Checked against Roku Support (sibling check) on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
When the picture comes up but looks wrong, the symptom usually tells you the cause. Find yours below.
Many movies sold or rented on VHS were recorded with copy protection, the best-known being Macrovision. It was designed to confuse recording equipment. Plain TVs ignored it, but some converter boxes, capture devices and recorders react to it: the picture may slowly brighten and dim, roll, or show a warning. Your own home videos don't have it.
HDMI has its own protection, called HDCP. A Blu-ray or streaming picture won't pass through a device that isn't allowed to receive it, such as a video recorder or capture box, and you may get a blank screen or an error. Connect the player straight to the TV, try the cable the other way round, and take any recorder or splitter out of the chain.
Checked against Netflix Help Center (sibling check) on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
Old TVs were nearly square — a shape called 4:3. New TVs are wide — 16:9. Most tapes and many older DVDs are square-shaped, so they won't fill a wide screen naturally. You can stretch them to fill it, but people then look short and wide.
Call Bill and he'll walk you through it — or come do it for you.
A picture with no sound is almost always a cable or a setting. Here's the order to check.
A mono VCR connected to only the white jack may play from one speaker. See "Only one sound plug?" in Connecting with Yellow, Red and White.
When sound runs ahead of or behind the picture, it's usually a soundbar or converter adding a small delay. Many TVs have a setting to fix it. On LG TVs it's AV Sync Adjustment under Sound > Additional Settings; other TVs call it Audio Delay or Lip Sync. Some soundbars have their own setting in their app or remote.
Checked against LG Support (sibling check) on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
A soundbar makes movies sound fuller and voices clearer. The trick is getting the sound from the player, through the TV, to the soundbar. The simplest arrangement works for nearly everyone.
Checked against HDMI Licensing Administrator, Samsung Support and Roku Support (sibling check) on November 15, 2026.
If the TV or soundbar has no ARC, use an optical cable (the small square plug) from the TV's Optical or Digital Audio Out to the soundbar. It carries regular surround sound but not the newest formats such as Dolby Atmos.
Some Blu-ray discs use sound formats the TV can't pass along to a soundbar. Open the player's Audio settings and change Digital Audio Output (or BD Audio, or similar) from Bitstream to PCM. PCM means the player decodes the sound itself, so everything downstream can play it.
A VCR or older DVD player connected by yellow-red-white or a converter box plays through the TV, and the TV sends that sound on to the soundbar the same way. Nothing extra to set up.
Call Bill and he'll walk you through it — or come do it for you.
If a disc won't play, or the player says "Cannot play this disc" or "Region code error," one of a few simple things is usually to blame.
Movie studios divide the world into regions, and most players sold in a region only play discs from that region. In the United States:
| Disc | U.S. region |
|---|---|
| DVD | Region 1 (the U.S., Canada and U.S. territories). Discs marked Region 0 or "ALL" play anywhere. |
| Blu-ray | Region A (the Americas and parts of East Asia). Region B is Europe, Africa, the Middle East, Australia; Region C is much of the rest of Asia. |
| 4K Ultra HD Blu-ray | Almost always region free. A bonus regular Blu-ray in the same box may still be region-locked. |
Look for a small globe icon with a number or letter on the back of the case. A disc bought on a trip abroad, or from an overseas online seller, may not play here. European DVDs are also in a different TV system (PAL), which many U.S. players and TVs can't show.
Checked against BFI and disc publishers' region-code guides on November 15, 2026.
Checked against Panasonic Support on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
Discs and tapes last a long time with a little care. Tapes need the most attention, because once a tape is damaged, the picture on it can be gone for good.
Before you put an old family tape into a VCR, look at it through the little window, and lift the flap on the front gently to look at the tape itself.
Archivists advise handling moldy tapes as little as possible, keeping them apart from other tapes (a sealed plastic bag is fine for now), and having them cleaned by a professional before they're played. If you use a conversion service (Using a Service to Convert Your Tapes), tell them about any moldy tapes and ask how they handle them before you send them.
Checked against Electronic Arts Intermix preservation guide on November 15, 2026.
If every tape looks snowy, the VCR's heads may be dirty. A head-cleaning tape can help, but use it sparingly, following its directions — too much can wear the heads. Don't take the VCR apart. A VCR that chews tapes or makes grinding noises should be retired before it eats something precious.
Call Bill and he'll walk you through it — or come do it for you.
If your player has given up, here's an honest picture of what you can still buy as of November 2026.
No company makes new VCRs. The last one stopped in 2016. Used and refurbished VCRs and DVD/VCR combos are sold online and in thrift and secondhand stores. If you buy one, buy from a seller who tests it and offers returns, and test it first with a tape you don't care about.
Checked against News reports (Push Square, Cord Cutters News, October 2026) and Panasonic Support on November 15, 2026.
| Feature | Why it matters |
|---|---|
| HDMI output | Essential for any new TV. Every Blu-ray player has it. |
| Plays what you own | DVD only? Any player. Blu-ray? A Blu-ray player. 4K discs? A 4K Ultra HD player. |
| Simple remote | Big Play, Stop and Eject buttons make life easier. |
| Streaming apps | Nice to have, but your TV probably already has them. |
| Region | Buy a U.S. model for U.S. discs (Discs That Won't Play: Region Codes and More). |
Call Bill and he'll walk you through it — or come do it for you.
Videotape is magnetic, and it slowly fades and breaks down with age. Many family tapes are now 30 or 40 years old. At the same time, no new VCRs have been made since 2016, and the ones still around are getting older too. You don't have to do it all this week, but it's worth starting.
| Type | What it looks like | Plays in |
|---|---|---|
| VHS | The full-size tape, about the size of a paperback | A VHS VCR or DVD/VCR combo |
| VHS-C | A small tape from a compact camcorder | A VHS VCR, using a VHS-C adapter cassette |
| 8mm, Hi8, Digital8 | Small tapes, like an audio cassette | The camcorder that made them, or a service |
| MiniDV | Very small tapes from 2000s camcorders | A MiniDV camcorder, or a service |
| Betamax | Like VHS, but a little smaller | A Betamax player, or a service |
Call Bill and he'll walk you through it — or come do it for you.
For most families, a service is the easiest way. You drop off or mail your tapes, and you get back digital files (and the original tapes).
Prices vary widely and change with sales. Some drop-off counters price by each 30 minutes of tape, and mail-in services commonly charge roughly $20 to $40 a tape, more for higher-quality or "upscaled" files. Capture, for example, listed standard-quality transfers at $19.99 a tape in 2026. Check the price on the company's own website or at the counter before you order.
Checked against Capture and Walmart Photo service listings on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
If you have a working VCR and some patience, you can save tapes yourself. The one thing to know: it happens in real time. A two-hour tape takes two hours to copy.
Many Ohio libraries now have a Memory Lab or media transfer station where you can copy tapes yourself, usually free, with the equipment already set up. The Akron-Summit County Public Library, next door to Portage County, has a Media Transfer Station you can book. Some libraries even lend a VCR-and-converter kit to take home. Bring a USB flash drive to save the files, and ask your own library what it offers.
Checked against Ohio public library Memory Lab pages (Akron-Summit County, Muskingum County, Bexley, Steubenville) on November 15, 2026.
Call Bill and he'll walk you through it — or come do it for you.
Once your tapes are files, they're easy to enjoy — and easy to lose if they live in only one place. A little planning keeps them safe for the grandchildren.
Online photo services let you share an album link so relatives can watch from anywhere. Our companion guide on making a photo slideshow can help you mix the videos with your photos.
Call Bill and he'll walk you through it — or come do it for you.
Most of what's in this guide you can do yourself, at your own pace. But part of being helpful is being honest about when a hand saves you time and worry. Here's my straight advice, with no pressure.
I'm a technology helper, not a repair shop. I can't fix the mechanical insides of a VCR or a disc player, and I don't clean moldy tapes — that's a job for a professional tape service. I'll tell you honestly if a player is worth keeping.
I work at your pace, explain what I'm doing in plain words, and never talk down to anyone. I'll tell you honestly when something isn't worth your money. I've been doing this kind of work for more than 30 years, and I serve Portage County, Ohio, in person, and folks farther away by remote help.
Thank you for taking the time with this guide. Enjoy your movies — and those family tapes.
— Bill
Call Bill and he'll walk you through it — or come do it for you.
Keep just this page near the TV. The whole guide, boiled down.
| Situation | What to do |
|---|---|
| Player has HDMI | One HDMI cable to any HDMI port on the TV. Best picture. |
| TV has yellow-red-white | Color to color. Choose the AV input. |
| TV has one small AV IN jack | Use the TV maker's AV breakout adapter. |
| TV has only HDMI | A powered AV-to-HDMI converter box. Not a plain cable. |
| Plain HDMI-to-RCA cable | Can't work for a VCR. Return it. |
| Channel 3 / 4 by coax | Often doesn't work on new TVs. Use yellow-red-white instead. |
| No Signal | Player on? Right input? Plugs pushed in? Converter powered? |
| Black and white | Yellow plug in the wrong jack, converter on PAL, or an overseas tape. |
| Rolling or lines | Use the VCR's tracking buttons. |
| Stretched picture | Player screen format 16:9; TV picture size 4:3 or Original for tapes. |
| No sound | Red and white plugged in? Mute? Try PCM for soundbars. |
| Disc won't play | Clean it; check the region (U.S.: DVD 1, Blu-ray A); right player type? |
| Moldy tape | Don't play it. Bag it and ask a professional service. |
| Saving tapes | Service, library Memory Lab, or a USB capture device. Keep two copies. |
| Keep handy | |
|---|---|
| TV brand & model | ____________________ |
| Player brand & model | ____________________ |
| Player's HDMI or AV input on the TV | ____________________ |
| Soundbar on HDMI port | ____________________ |
| Converter box (brand) and its power | ____________________ |
| Tape list kept at | ____________________ |
| Service used & date sent | ____________________ |
| Where the digital copies are kept | ____________________ |
Call Bill and he'll walk you through it — or come do it for you.
We use cookies only to see which pages help people most. Learn more