Bill's Home Tech
Business Cameras & Door Access — help from Bill

Business Cameras, Recorders & Door Access

What are you trying to do?

Type it in plain words — like "export a clip for the police" or "remove an employee's code."

Keep it handy
Reading is free, with no sign-up. If you'd like, we can email you the link.
Bill's Home Tech · All manuals · (330) 200-8042 · Serving Portage County, Ohio
Prefer paper? Print this guide
All topics
Getting Started

A Note from Bill

Hello, and welcome. Maybe you run a small shop and want to see the register and the back door. Maybe you just bought a business and inherited a recorder in a closet that nobody knows the password to. Maybe an employee left on bad terms and you're wondering who still has a key. Or maybe the police asked you for video and you have no idea how to get it off the box. Whoever you are, this guide is for you.

I'm Bill. I've written this guide the way I'd explain it standing next to you in the back room, looking at the equipment together: plainly, patiently, and without the installer jargon. When a word like "NVR," "PoE" or "retention" comes up, I'll stop and tell you what it means.

You can't break it by looking around

Opening the camera app, scrolling back through recordings or reading the settings won't hurt anything. There are only a few places where care really matters: formatting a hard drive (it erases the video), resetting a recorder or lock (it erases settings and sometimes every user code), and passwords (lose the only admin password and you may have to start over). I'll point those out clearly when we get to them.

Why it helps
What a good system does for your business
Cameras let you check on the shop from home, settle a "he said, she said" at the counter, and hand the police or your insurance company a clear clip when something goes wrong. Electronic door access means no more re-keying the locks every time someone leaves: you delete a code or a card, and that person is out. Both give you a record of what happened and when.

What's in this guide

Good to know
This guide is not legal advice
I'll mention a few places where the law comes into it, such as recording sound or watching employees. Rules vary by state and by situation, so for anything beyond common sense, ask your attorney, your insurance agent or your local police department.

And I'm only a phone call away

If you get stuck, you're never stuck alone. Call me at (330) 200-8042. No question is too small, and no one will make you feel silly for asking. Let's get started.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Ways Your Business Cameras & Locks Can Make Life Easier

A few small setups can save you hours of scrolling, trips to the shop and locksmith bills. Each takes about fifteen minutes and uses features you likely already have.

1. Find a person on the video in seconds

Why it helps
Why this helps
Instead of watching a whole day of recordings, you ask the system to show only the moments a person or a car appeared. A two-hour hunt becomes a two-minute one.
  1. In the Reolink app, tap the camera and open Playback.
  2. Tap the magnifying glass to open AI Video Search.
  3. Choose Person (or Vehicle for the parking lot) and pick the date.
  4. Scroll the short list of clips and tap one to watch it.
  5. When you find the right moment, download it or note the time and export it from the recorder (see Chapter 12).
Tip
Good to know
No extra cost. AI Video Search works only on supported Reolink cameras and recorders, and what it can find (person, vehicle, animal) varies by model. Other brands have similar event filters in playback.

Checked against Reolink Support on November 15, 2026.

2. Give the cleaning crew a code that only works on their night

Why it helps
Why this helps
You don't have to come back at night to let anyone in, and their code simply doesn't work the rest of the week. The lock's history shows when they came and went.
  1. Open the Schlage Home app and choose your Encode Plus lock.
  2. Open Access Codes and tap to add a new code.
  3. Name it, such as "Cleaning crew," and choose the code.
  4. Choose Recurring, then pick the days and the hours, for example Tuesday and Friday, 6 to 10 p.m.
  5. Save, then test the code at the door during that time.
  6. If you change cleaning companies, delete the code in the same list.
Tip
Good to know
No extra cost. The Encode Plus holds up to 100 codes. Make scheduled codes in the Schlage Home app; codes made in Apple Home are always on. Saved codes keep working at the keypad if the Wi-Fi goes down.

Checked against Allegion (Schlage) Support on November 15, 2026.

3. Let a manager see only the cameras they need

Why it helps
Why this helps
Your manager can check the sales floor from home without seeing your office or the safe, and they can't delete video or change settings. You stay in control.
  1. In the Ring app, open the menu and choose Shared Users (in some versions, under Control Center).
  2. Pick the business location and choose to add a shared user.
  3. Enter the manager's email address and send the invitation.
  4. Open that person's entry and turn off any cameras they shouldn't see.
  5. When they move on, open the same screen and remove them.
Tip
Good to know
No extra cost. Only the account owner can add, change or remove shared users. Shared users can't delete videos, change device settings or invite anyone else.
From Bill
Want a hand setting these up?
Bill can set up search, scheduled codes and staff access with you: $49 remote · $99 in your home. Call (330) 200-8042 or book at billshometech.com/book.

Checked against Ring Support on November 15, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

What Cameras and Door Access Can Do for a Small Business

Before buying anything, it helps to be clear about what you want the system to do. A camera system and a door-access system are two different things that often get sold together. You can have either one, or both.

Cameras and recorders

  • See it live from your phone: is the shop open on time, is the parking lot clear, did the delivery come?
  • Look back at what happened: a slip-and-fall, a dispute over change, a broken window overnight.
  • Hand over evidence: a clip the police or your insurance company can actually use (Exporting a Clip for the Police or Your Insurance).
  • Get alerts when someone is on the property after hours (After-Hours Alerts).
  • Discourage trouble: visible cameras and a sign tell people they're being recorded (Privacy, Signs, Sound and Employees).

Door access

  • No more copied keys. Each person gets their own code, card, fob or phone key.
  • Turn someone off in seconds when they leave, instead of changing the locks (Removing Someone, and Lost Fobs).
  • Schedules: a cleaning crew's code that only works on their night, or a door that unlocks itself during business hours (Schedules, Codes and the Door History).
  • A history of which code or card opened which door, and when.
Why it helps
What this does for you
The real value is peace of mind and less hassle. You stop wondering who still has a key, you stop driving in to check whether the back door got locked, and when something does go wrong you have facts instead of guesses.

What these systems don't do

  • A camera doesn't stop a break-in by itself. It records it. Good locks, lighting and an alarm still matter.
  • Nobody is watching your cameras unless you pay for professional monitoring. Alerts go to your phone; you decide what to do.
  • Video is only useful if it's still there when you need it and clear enough to see a face or a license plate. Much of this guide is about those two things.
Tip
Write down your three main worries
Before shopping, list the three things you most want to see or control, such as "the register," "the back door" and "the parking lot at night." It keeps you from buying eight cameras when three well-placed ones would do.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

A Recorder in the Back Room, or Cameras That Save to the Cloud?

Almost every business camera system works one of two ways. Either the video is saved on a recorder, a box with a hard drive that sits in your building, or it's saved on the camera maker's internet servers, which everyone calls "the cloud." Some systems do a bit of both.

Recorder systems (NVR or DVR)

The cameras are wired back to a recorder in a closet or office. The recorder saves the video, usually around the clock, and a free phone app lets you watch from anywhere. Reolink, Lorex and Swann sell boxed kits; Ubiquiti's UniFi Protect is a more business-oriented recorder system that many installers use.

  • Usually no monthly fee. You buy the equipment once.
  • Keeps recording when the internet is down, because the video doesn't need to leave the building.
  • Records all the time, not just short motion clips, so you can scroll back to any minute the drive holds.
  • Downside: if a thief takes or smashes the recorder, the video goes with it. Hide it and lock it up.

Cloud cameras

Each camera connects to the internet and the video is stored online. Ring sells a line it markets as Ring for Business, managed in the same Ring app as home cameras. At the larger end, companies like Verkada sell business cameras managed entirely through a web dashboard called Command, sold with a yearly license per camera.

  • Video is safe off-site even if a camera is stolen.
  • Easy to manage several locations from one app or website.
  • Downside: monthly or yearly fees per camera or per location, and recording depends on your internet connection and upload speed.
Good to know
Verkada keeps video on the camera, too
Verkada cameras store video on a drive inside each camera, with standard options from 15 to 365 days depending on the model, and the oldest video is deleted as the drive fills. Cloud backup is separate and set in Command under the camera's Storage & Retention settings; Verkada says 30 days of cloud backup is included with the camera license on most models. Pricing is by quote.

Checked against Verkada Help Center on November 15, 2026.

Side by side

Recorder systemCloud cameras
Where video livesA hard drive in your buildingThe company's servers (and sometimes the camera)
Monthly costUsually noneUsually per camera or per location
Internet goes downKeeps recordingMay record only to the camera, or not at all
Recorder stolenVideo is lostVideo is safe online
Several locationsOne app, one recorder per siteBuilt for it
Who installs itHandy owner or installerMostly owner (Ring) or a dealer (Verkada)
Tip
The best of both
Many small businesses do well with a recorder system plus a habit of saving important clips to a phone or a flash drive the same day (Exporting a Clip for the Police or Your Insurance). That gives you off-site copies of the moments that matter, without a monthly fee for every camera.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Taking Stock: What You Already Have

If you bought a building or a business, there may already be cameras, a recorder and a keypad on the door. Before you replace anything, spend half an hour finding out what's there. You'll need these answers whether you keep the old system or call someone in.

A walk-around checklist

  1. Count the cameras, inside and out. Note where each one points.
  2. Follow the cables back to the recorder. It's usually a flat box in a closet, office or basement, often near the internet router.
  3. Read the label on the bottom or back of the recorder: brand, model number and any QR code or "Device ID" or "UID." Take a photo of it.
  4. Look at the cables. Round coax cables with twist-on metal plugs mean a DVR system; network cables with clear clip-in plugs mean an NVR system (NVR, DVR and PoE in Plain English).
  5. Check for a monitor connected to the recorder, and a mouse. Many recorders are set up from that screen.
  6. Look at every exterior door: plain key lock, keypad, card reader or smart lock? Note the brand.
  7. Ask the previous owner or manager for every password, app login and the list of people with codes or cards.
Watch out
Passwords are the thing most often lost
When a business changes hands, the recorder's admin password and the app account are usually tied to the old owner's email. Get them transferred, in writing, before closing if you can. If you can't, plan on a reset (When Something Isn't Working) and know that some resets erase the settings.

Questions to answer before you spend money

QuestionHow to find out
Does the old system still record?Play back yesterday on the recorder screen. If you see video, it works.
How many days does it keep?Scroll back to the oldest recording. That's your retention (Hard Drives: How Many Days of Video You Keep).
Can you see it on your phone?Only if you have the app login or can set one up (Watching from Your Phone or Computer).
Who has keys, codes or cards?If nobody knows, assume too many people do and start fresh (Removing Someone, and Lost Fobs).
Is it worth keeping?Very old analog cameras give fuzzy pictures. Newer recorders may still be fine.
Good to know
Older equipment from certain makers
Since 2022 the FCC has refused to approve new models from a short list of companies, including the camera makers Hikvision and Dahua, and in 2026 it announced steps to limit the import and sale of older models too (June 2026). Those rules are about approving, importing and selling equipment; they don't order owners to rip out a system they already have. If your recorder carries one of those names, it's worth keeping its software current and keeping it off the open internet (Keeping the System Itself Secure). Some private-label kits are made by these companies under other names.

Checked against FCC on November 15, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Cameras and Recorders

NVR, DVR and PoE in Plain English

Three abbreviations come up constantly when you shop for business cameras. Once you know them, the rest of the boxes on the store shelf make sense.

NVR: Network Video Recorder

An NVR records IP cameras, the modern kind that send a digital picture over a regular network cable (the same kind of cable that plugs into your internet router). The plugs are clear plastic with a little clip. Almost every new business kit is an NVR system.

DVR: Digital Video Recorder

A DVR records analog cameras over round coax cable with twist-on metal plugs (called BNC). DVRs are common in older installations. Newer DVRs handle sharper analog cameras than the old ones did, so if your building is already full of coax, a new DVR can be a sensible upgrade without pulling new cable.

Checked against Lorex and Swann (sibling check) on November 15, 2026.

PoE: Power over Ethernet

PoE means one network cable carries both the picture and the power to the camera. No outlet is needed at the camera, which is a big deal on a high exterior wall. The power comes from the NVR's built-in camera ports, or from a separate PoE switch (a box with several network ports).

  • A single PoE cable run can be up to about 328 feet (100 meters). Longer runs need a PoE extender.
  • Thin or cheap cable, and power-hungry cameras, shorten the real distance.
  • Outdoor cable should be rated for outdoor or direct-burial use.

Checked against Reolink Support (sibling check) on November 15, 2026.

Why it helps
What PoE does for you
Fewer electricians, fewer outlets, fewer things to fail. And because the recorder powers the cameras, putting the recorder on a battery backup keeps every PoE camera running through a short power outage (Power Outages and Battery Backup).

Channels and resolution

WordWhat it means
ChannelsHow many cameras the recorder can handle: 4, 8, 16 and so on. Buy a few more than you need now.
ResolutionHow sharp the picture is. 4K (8 megapixel) cameras show more detail but fill the hard drive faster.
Frame rateHow smooth the motion looks. Most businesses don't need the highest setting.
Bit rateHow much data each camera sends per second. It decides how many days the drive holds (Hard Drives: How Many Days of Video You Keep).
Tip
Mixing brands
Many NVRs accept IP cameras from other makers using a standard called ONVIF, but features like person detection often work only with the same brand. If you can, keep cameras and recorder the same make.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Cameras and Recorders

The Brands You'll Meet

You don't need to know every brand. These are the names small businesses in our area are most likely to buy, inherit or be quoted. I'm not paid by any of them.

BrandWhat it isGood fit
ReolinkNVR kits and PoE cameras; free Reolink app and Reolink Client for computersDo-it-yourself shops and offices, no monthly fee
LorexNVR and DVR kits; Lorex Classic app for most recorders, Lorex Pro for professional NVRsSame, widely sold at big-box stores
SwannNVR and DVR kits; Swann Security appSame; note one account per recorder
UniFi Protect (Ubiquiti)Business-grade recorders and cameras that also run UniFi Access door controlInstallers, offices that want cameras and doors in one system
RingCloud cameras and alarm, managed in the Ring app, with a business lineSmall storefronts that want simple, app-based cameras
VerkadaCloud-managed cameras and door access through a web dashboardMulti-site businesses with a dealer and a budget

Checked against Reolink, Lorex, Swann, Ubiquiti, Ring and Verkada help pages on November 15, 2026.

Home brands in a business

Plenty of small shops use the same Ring, Blink, Wyze or Google Nest cameras people put on their houses. That's fine for one or two cameras. Where they fall short for a business is around-the-clock recording, controlling what each employee can see, and pulling long stretches of video. My separate guides on Ring, Reolink & Wired Camera Systems and Outdoor & Floodlight Cameras go deeper on those products.

Watch out
Professionally installed and leased systems
If an alarm company installed your cameras, the recorder or the app account may belong to them, and the system may be part of a monthly contract. Read the contract before you unplug or reset anything, and ask them to give you admin access in writing.
Tip
Before you buy
Check three things on the brand's own website: whether the app supports giving employees limited access (Giving Staff Their Own Access), how you export a clip (Exporting a Clip for the Police or Your Insurance), and whether there's any monthly fee for the features you want. Prices change often, so check them on the day you buy.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Cameras and Recorders

Where Cameras Go in a Shop or Office

A few well-placed cameras beat a dozen poorly placed ones. Think about what you'd need to see if you had to hand a clip to a police officer.

The usual spots

WhereWhy
Every entranceAimed so a person walking in faces the camera. This is your best face shot.
The register or counterFrom above and slightly behind the cashier, showing hands, cash drawer and customer.
Back door and loading areaWhere most after-hours trouble starts. Pair with good lighting.
Parking lotA wide view for what happened, plus a closer camera at the driveway for plates.
Stock room or safeInside, aimed at the door or the shelf that matters.

Tips that make footage usable

  • Height: about 8 to 10 feet is a good balance. Higher is harder to tamper with but shows the tops of heads.
  • Light: don't point a camera straight at a bright window or glass door; faces turn into silhouettes.
  • Close enough: a wide camera covers a lot but can't identify a face across the lot. Use a second, tighter camera at chokepoints like a doorway.
  • Night: walk out after dark and check each view on your phone. Lights and reflections surprise everyone.
  • Cable: keep cables inside walls or conduit where you can, so they can't be cut easily.

Where not to put cameras

  • Restrooms, changing areas, or anywhere people reasonably expect privacy. Don't do it.
  • Aimed into a neighbor's windows or yard.
  • Break rooms or offices, without thinking it through and telling staff (Privacy, Signs, Sound and Employees).
Safety
Ladders and wiring
Mounting cameras means ladders and sometimes drilling near electrical lines. If you aren't comfortable on a ladder, or the cable has to go through a fire-rated wall or ceiling, have it done professionally.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Cameras and Recorders

Hard Drives: How Many Days of Video You Keep

Retention means how far back your video goes. If your recorder keeps 21 days, then on the 22nd day the oldest video is recorded over. This is the single most important number in the whole system, and most owners don't know theirs.

Why it matters

Problems often aren't noticed right away. A missing pallet, a damaged car in the lot, or an insurance claim that arrives two weeks later all depend on video that's still there. Many businesses aim for at least 30 days. Ask your insurance agent whether they expect a certain number.

What decides how many days you get

  • Drive size, in terabytes (TB). Bigger holds more.
  • Number of cameras. Each one shares the same drive.
  • Picture quality and bit rate. 4K cameras use far more space than lower settings.
  • Recording all the time or only on motion. Motion-only recording stretches the days a lot, but you can miss things that happen slowly.

As an example from Reolink's own figures, a 3 TB drive holds about 44 days of continuous recording from one camera at one common setting. Add a second camera and that roughly halves. Reolink and other brands offer free online storage calculators where you type in your cameras and drive size.

Checked against Reolink Support (sibling check) on November 15, 2026.

Choosing a drive

Recorders run 24 hours a day, so they need drives built for it. Western Digital's WD Purple line, for example, is made for constant video recording and is rated for up to three times the yearly workload of WD's desktop drives. Other drive makers sell similar surveillance lines. Check your recorder maker's list of compatible drives and the largest size it accepts.

Checked against Western Digital on November 15, 2026.

Watch out
Formatting erases everything
A new drive has to be initialized or formatted by the recorder before it records. Doing that to your existing drive erases all the video on it. Save any clips you need first.

Find your number today

  1. Open playback on the recorder screen or in the app.
  2. Pick one camera and go to the earliest date on the calendar that has recordings.
  3. Count the days from then to today. Write it on the cheat-sheet (Your Business Cameras & Door Access Cheat-Sheet).
Tip
UniFi Protect owners
UniFi Protect lets you set how long each camera's recordings are kept, under each camera's recording settings, and a Recording Manager under Settings to change many cameras at once. Give less important cameras shorter retention to leave room for the ones that matter. Ubiquiti publishes which hard drives its recorders support; check it before buying one.

Checked against Ubiquiti Help Center on November 15, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Cameras and Recorders

Setting Up a Recorder Safely

Most break-ins into camera systems don't happen through clever hacking. They happen because someone left the factory password in place or never updated the software. Ten minutes at setup prevents that.

The first-day list

  1. Put the recorder somewhere locked and out of sight, with air around it so it doesn't overheat.
  2. Connect it to your router with a network cable, and plug in a monitor and the mouse that came with it.
  3. Create a strong admin password during the setup wizard. Never keep "admin," "123456" or a blank password. Write it on the cheat-sheet and keep that somewhere private.
  4. Set the date, time and time zone correctly. Police and insurers need accurate timestamps.
  5. Update the firmware, the recorder's built-in software, from the app or the recorder menu (Keeping the System Itself Secure).
  6. Check the recording schedule: around the clock, or motion only (Hard Drives: How Many Days of Video You Keep).
  7. Turn on the screen lock on the recorder's monitor if it has one, so a customer can't wander up and play back video.
Good to know
Why default passwords matter
CISA, the federal government's cybersecurity agency, tells small businesses to replace every default password, and recommends changing the maker's default password before any device goes on your network. Cameras and recorders are exactly the kind of device it means.

Checked against CISA on November 15, 2026.

Separate the cameras from the rest of the business

If you have a business Wi-Fi with a separate guest network, never put cameras on the guest network. Better still, keep PoE cameras plugged into the recorder's own ports, which keeps them off your main network entirely. My Business Wi-Fi & Guest Networks guide explains networks in more detail.

Why it helps
What a careful setup does for you
A recorder with its own strong password, current software and correct clock is one you can trust in court and on an insurance claim, and one strangers can't peek into from the internet.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Watching from Your Phone or Computer

Every brand in this guide has a free app for watching live video and playing back recordings from anywhere with an internet connection. The first time, you link the app to your recorder. After that it's just a tap.

Linking a recorder to the app

  1. Download the brand's app from the App Store or Google Play. Check that the publisher is the real company.
  2. Create an account using a business email address you'll keep, not a personal one an employee controls.
  3. Tap + or Add Device.
  4. Scan the QR code on the recorder's label, or type the UID or Device ID printed under it.
  5. Enter the recorder's admin password (the one you created in Setting Up a Recorder Safely) and give it a name, such as "Main Street shop."
  6. Tap the recorder, then a camera, to see it live.

Checked against Reolink Support and Lorex Help (sibling check) on November 15, 2026.

BrandApp and how you add it
ReolinkReolink app; tap +, scan the NVR's QR code. Remote access needs the recorder's UID feature turned on.
LorexLorex Classic app for most recorders (formerly the Lorex app); Lorex Pro for professional NVRs.
SwannSwann Security app. A recorder can be paired to only one Swann account.
UniFi ProtectUniFi Protect app, signed in with the UI account that owns the system.
RingRing app; cameras are added during setup, grouped by location.

On a computer

A big screen is easier for watching several cameras at once or hunting through footage. Reolink offers a free Reolink Client program for Windows and Mac; UniFi Protect and Verkada work in a web browser; Ring has a web dashboard at ring.com. Download programs only from the brand's own website.

Why it helps
What this does for you
Check that the shop opened on time, see whether the snow got plowed, or glance at the lot when an alarm goes off at 2 a.m., without getting in the car.
Watch out
Use the owner account only for yourself
Don't hand your own login to a manager. Give each person their own access instead (Giving Staff Their Own Access), so you can remove one person without changing your password everywhere.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Finding the Footage You Need

Recorders that record around the clock hold a lot of video. The trick is jumping straight to the right few minutes instead of watching a whole day.

The basic way: the timeline

  1. In the app, tap the camera, then Playback. On the recorder's own screen, right-click and choose Playback.
  2. Pick the date on the calendar.
  3. Slide the timeline to the hour you think it happened. Colored marks on the timeline usually show where motion or a person was detected.
  4. Play at faster speed until you find it, then slow down.

Shortcuts

  • Filter by event: show only person, vehicle or motion clips. Reolink calls its version AI Video Search, under the magnifying glass in Playback, on supported models.
  • Watch several cameras at once on the computer program to follow someone from the door to the counter.
  • Narrow the time using other records: a receipt time, an alarm log, or a door-access log (Schedules, Codes and the Door History).

Checked against Reolink Support (sibling check) on November 15, 2026.

Tip
Write down the time as soon as you notice
If a customer complains or you find damage, note the date and approximate time right away and check the video that same day. It's much faster to search an hour than a week.
Watch out
The clock runs out
Remember your retention number from Hard Drives: How Many Days of Video You Keep. If your recorder keeps 14 days and the incident was 12 days ago, save the clip today.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Exporting a Clip for the Police or Your Insurance

When something happens, the police or your insurance adjuster will ask for a copy of the video. They can't use a clip that's still sitting inside your recorder, and a phone video of your monitor is a poor substitute. Here's how to make a proper copy.

From the recorder to a USB flash drive (Reolink example)

  1. Plug a working USB flash drive into the recorder's USB port.
  2. On the recorder's screen, right-click and choose Backup.
  3. Choose the camera or cameras, the video type and the start and end time, then click Search.
  4. Preview the clips with the play button to make sure they're the right ones, then tick them.
  5. If offered, choose Export to MP4 Format so it plays on any computer. Otherwise the files stay in the H.264 or H.265 format, which some computers can't open.
  6. Click Backup, then Start. When it finishes, eject the flash drive from the recorder's USB management screen before pulling it out.

Checked against Reolink Support on November 15, 2026.

From the phone app

Most apps let you download a clip in playback: mark a start and end, then save it to the phone. From there you can copy it to a computer or share it. For anything longer than a few minutes, the flash-drive method is more reliable.

Make the copy hold up

  • Include a little time before and after the event, and every camera that shows it.
  • Keep the original file. Don't trim, edit or add music. Give the police a copy and keep one yourself.
  • Write down the camera name, date and time, and note if the recorder's clock is off by a few minutes.
  • Ask the officer or adjuster how they want it: many take a flash drive; some use a secure upload link.
Why it helps
What this does for you
A clean, complete clip with an accurate time stamp can be the difference between a claim that's paid quickly and one that drags on, and it gives the police something they can actually use.
Scam alert
Upload links you didn't ask for
Only send video through a link you got directly from the police department or your insurer. If an unexpected email or text asks you to "upload footage" or log in to your camera account, call the department or your agent at the number you already have.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

After-Hours Alerts

Alerts tell your phone when a camera sees a person or movement. For a business, the trick is getting alerts at night and on Sundays, when nobody should be there, without your phone buzzing every time a customer walks in.

Setting a schedule

  1. Make sure your phone allows notifications from the camera app, in the phone's own Settings.
  2. In the app, open the recorder's or camera's settings and find Push Notifications, Alerts or Motion Settings.
  3. Turn alerts on, then open the schedule.
  4. Mark only the hours the business is closed.
  5. Choose Person (and Vehicle for the lot) instead of all motion, so blowing snow and headlights don't set it off.
  6. Save, and test it one evening by walking past the camera.

Checked against Reolink Support (sibling check) on November 15, 2026.

Tip
Use zones
Most cameras let you draw an area to watch, such as the back door but not the busy sidewalk. Fewer false alarms means you'll actually look when one comes in.

What to do when an alert comes in

  1. Open the live view and look. Don't go to the building alone if you see someone.
  2. If there's a crime in progress, call 911.
  3. Save the clip the same day (Exporting a Clip for the Police or Your Insurance).
Safety
Your safety comes first
A camera is there so you don't have to confront anyone. Let the police handle a break-in. Equipment and stock can be replaced.
Good to know
Professional monitoring
Some systems, such as Ring with a paid plan and its alarm, or an alarm company contract, offer people who watch alarms around the clock and call the police for you. That's a separate monthly cost; ask what's included and whether there's a contract.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Staff and Video

Giving Staff Their Own Access

Sooner or later a manager, a partner or a family member needs to see the cameras. The right way is to share the system with their own account, not to hand them your login. Most apps call this "sharing" or "shared users."

Why separate logins matter

  • You can remove one person without changing your own password.
  • You can limit what they see: the sales floor, but not your office.
  • Shared users usually can't delete video or change settings, so a mistake or a grudge can't wipe the recordings.
  • Your owner account stays protected by your own password and two-step sign-in (Keeping the System Itself Secure).

Reolink

  1. In the Reolink app, open the recorder's Device Settings and tap Share Device.
  2. Tap Add Share User and enter the person's Reolink account.
  3. Choose View Only and pick which cameras they can see, or Allow Management for someone you trust to change settings.
  4. The person opens their own Reolink app, taps Add Device and follows the invitation.

Reolink allows up to 20 shared users on a device.

Checked against Reolink Support (sibling check) on November 15, 2026.

Lorex

In the Lorex Classic app, open the recorder's Device Settings and choose Share Device. The person needs their own Lorex account. Cameras on a recorder are shared through the recorder, not one by one. You can change or remove sharing at any time.

Checked against Lorex Help (sibling check) on November 15, 2026.

Ring

Only the account owner can add, change or remove Shared Users. Open the app menu, choose Shared Users (in some versions it's under Control Center), pick the location and invite the person by email. You can turn off particular cameras for that person. Shared users can't delete videos, change device settings or invite anyone else.

Checked against Ring Support on November 15, 2026.

Swann, UniFi Protect and Verkada

  • Swann: a recorder pairs with only one Swann Security account, and there's no separate guest access. If you must share, use a dedicated business login and change its password when someone leaves.
  • UniFi Protect and Verkada are built for staff: you invite each person and give them a role (such as view-only) from the web dashboard.
Watch out
Swann accounts and shared passwords
Because a Swann recorder allows only one account, anyone who knows that password can see everything. Keep the list short and change the password the day someone leaves (When Someone Leaves: Cameras).

Checked against Swann Support (sibling check) on November 15, 2026.

Why it helps
What this does for you
Your manager can check the floor on a snow day, your spouse can look in on the shop, and you keep full control. When someone moves on, one tap removes them.
Tip
Keep a list
Write down who has camera access and what kind on the cheat-sheet (Your Business Cameras & Door Access Cheat-Sheet). Review it twice a year.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Staff and Video

When Someone Leaves: Cameras

When an employee, manager or business partner leaves, especially on bad terms, take away their access to the cameras the same day. It takes a few minutes and closes a door you may not realize is open.

Same-day checklist

  1. Remove them as a shared user in the camera app (Giving Staff Their Own Access).
  2. If they ever knew the recorder's admin password or the owner login, change it now.
  3. If the app account was set up with their email address, move it to a business email you control before they go, or as soon as you can.
  4. Check whether they had the computer program installed on a work computer with a saved password, and sign it out.
  5. Remove their door codes, cards and fobs at the same time (Removing Someone, and Lost Fobs).
  6. Write the date on your cheat-sheet list.
Watch out
If you think they might delete something
Shared users on most apps can't delete recordings, but anyone with the recorder's admin password can. If there's an incident you may need, export the clip first (Exporting a Clip for the Police or Your Insurance), then change passwords.

If you can't remove them

Sometimes the former employee set up the whole system on their own account, and you can't get in. Don't panic. You may need to reset the recorder and set it up again under your business account. Reset steps and what they erase are in When Something Isn't Working. Export anything important before you reset.

Tip
Set it up right from the start
Always create camera and lock accounts with a business email address that belongs to the business, not to one person. If you're the owner, it should be your login, with your phone for two-step sign-in.
Why it helps
What this does for you
No former employee watching your store from their couch, and no awkward conversation later. It's simply part of saying goodbye.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Doors: Keypads, Smart Locks, Cards and Fobs

Keys, Keypads, Smart Locks or Cards?

"Door access" just means controlling who can open a door, and when. There are four common ways to do it, from simplest to most capable.

OptionHow people get inBest for
Plain keysA metal keyOne or two people who never change
Keypad lockA code typed on the lock, set at the lockA small staff, one door
Smart lock (Wi-Fi)A code or a phone app; codes managed from your phoneOne or two doors, changing staff, cleaning crews
Card, fob or phone systemTap a card, fob or phone on a reader wired to a controllerSeveral doors, more staff, a need for history and schedules

Questions that decide it

  • How many doors? One back door is a smart-lock job. Four doors and a stock room point to a card system.
  • How many people, and how often do they change? High turnover makes keys a headache.
  • Do you need to know who opened the door? Keypads with one shared code can't tell you. Personal codes or cards can.
  • Is it a fire exit? Then the rules in Fire Exits and Electric Locks come first.
  • Who will manage it? You, a manager, or an installer you call?
Why it helps
What electronic access does for you
The biggest win is simple: when someone leaves, you delete their code or card. No locksmith, no wondering about copied keys.
Tip
Keep one good key
Even with electronic locks, most have a key override. Keep that key, and know where it is, in case the batteries die or the system goes down.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Doors: Keypads, Smart Locks, Cards and Fobs

Keypad and Smart Locks for a Small Business

A Wi-Fi smart deadbolt is often the easiest upgrade for a small shop's back door or an office. You manage the codes from an app, and each person can have their own.

An example: Schlage Encode Plus

Schlage's Encode Plus Wi-Fi deadbolt is managed in the Schlage Home app. It holds up to 100 access codes. In the Schlage Home app each code can be always on, recurring (for example, Tuesdays from 6 to 9 p.m.) or temporary (a start and end date). Codes and schedules already saved stay on the lock even if the Wi-Fi goes down.

Checked against Allegion (Schlage) Support on November 15, 2026.

Adding a code for one person

  1. Open the lock's app and choose the lock.
  2. Find Access Codes (or Users) and tap + or Add.
  3. Type the person's name, so the history shows who used it.
  4. Choose the code, or let the app pick one.
  5. Set the schedule: always, certain days and hours, or between two dates.
  6. Save, and test the code at the door before you give it out.
Watch out
Changing the code length erases codes
On the Schlage Encode Plus, changing how many digits the codes have deletes every existing code from the lock. Don't change it unless you're ready to re-enter everyone's code.

Checked against Allegion (Schlage) Support on November 15, 2026.

Things to know about smart locks at a business

  • Batteries. Most run on AA batteries. The app warns you when they're low; change them promptly.
  • One shared code is a bad idea. Give each person their own so you can remove one without changing everyone's.
  • Commercial doors with storefront glass, panic bars or heavy use often need commercial-grade hardware. Ask a locksmith whether a home-style deadbolt fits your door.
  • Owner account. As with cameras, set it up with a business email (When Someone Leaves: Cameras).
Tip
Use it with your cameras
Put a camera where it can see the person at the keypad. Together, the lock history and the video tell you exactly who came in.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Doors: Keypads, Smart Locks, Cards and Fobs

Card, Fob and Phone Systems

Bigger offices, clinics and multi-door buildings often use a card or fob system. A small reader sits by each door; a controller unlocks the door's electric lock when a valid card, fob or phone is held up; and a website or app manages it all. Most are installed by a dealer.

The words you'll hear

WordWhat it means
CredentialWhatever a person uses to get in: a card, fob, PIN or phone.
ReaderThe pad by the door that you tap.
Controller or hubThe box, often in a closet, that decides whether to unlock.
Access level or groupA set of doors and times, such as "Staff, Monday to Saturday, 7 a.m. to 7 p.m."
Mobile credentialA phone used as the key, through an app or a phone wallet.

Systems you may meet

  • UniFi Access (Ubiquiti): each person is set up under People, and their PIN or NFC card is added under that person's Credentials. It can run alongside UniFi Protect cameras.
  • Verkada Access: managed in Verkada's Command dashboard; users can unlock with a badge or with the Verkada Pass phone app, and doors are grouped into access levels.
  • Brivo: a cloud system sold through dealers; staff can get a Brivo Mobile Pass by an emailed invitation.
  • Kisi: a cloud system whose employee badges can live in Apple Wallet, so people hold an iPhone or Apple Watch to the reader.

Checked against Ubiquiti, Verkada, Brivo and Kisi help pages on November 15, 2026.

Good to know
Prices are by quote
These systems are usually priced through a dealer or by quote, often with a yearly software fee per door or per user on top of the hardware and installation. Get the yearly cost in writing, and ask what happens if you stop paying.
Why it helps
What a card system does for you
One screen shows every door, every person and every entry. A lost card is turned off in seconds, and doors can unlock and lock themselves on a schedule.
Watch out
Make sure you're an administrator
If a dealer installs the system, ask for your own administrator login, not just a phone number to call. You should be able to remove a person at 9 p.m. on a Saturday without waiting for anyone.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Doors: Keypads, Smart Locks, Cards and Fobs

Schedules, Codes and the Door History

Once each person has their own code or card, two features become very useful: schedules, which limit when a code works, and the history (sometimes called the activity log or event log), which shows who opened which door and when.

Good uses for schedules

  • A cleaning crew code that works only on their nights.
  • A delivery or contractor code that works between two dates, then stops by itself.
  • Staff codes that work during business hours plus an hour on each side.
  • On card systems, a front door that unlocks itself during open hours and locks at closing.

Reading the history

  1. Open the lock or access app and find History, Activity or Events.
  2. Pick the date. Each line shows the door, the person's name or code, and the time.
  3. Note any entry that doesn't fit, such as a code used at 2 a.m.
  4. Use that time to jump straight to the right video (Finding the Footage You Need).
Tip
Name every code
History is only useful if each code has a person's name on it. "User 7" tells you nothing six months from now.
Watch out
Auto-unlock and storms
If a door unlocks itself on a schedule, think about snow days and holidays. Most systems let you add holiday dates or override the schedule from the app. Check it before you close for a holiday.
Why it helps
What this does for you
You stop handing out codes that work forever, and when a question comes up, such as "Was the back door opened Sunday?", you have an answer in a minute.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Doors: Keypads, Smart Locks, Cards and Fobs

Removing Someone, and Lost Fobs

The whole point of electronic access is how quickly you can take it away. Do it the same day someone leaves, and the moment you hear a card or fob is lost.

When an employee leaves

  1. Open the lock or access app.
  2. Find the person under Users, People or Access Codes.
  3. Delete their code, or remove or suspend the person. On UniFi Access, look under the person's Credentials; on Verkada, Command offers suspending or deleting an access user.
  4. Collect their physical card or fob, but turn it off first in case it isn't returned.
  5. Remove their camera access too (When Someone Leaves: Cameras).
  6. If you still use any metal keys, ask for them back and consider re-keying if one is missing.

Checked against Ubiquiti and Verkada help pages on November 15, 2026.

When a card or fob is lost

  1. Turn that card or fob off right away. Don't wait to see if it turns up.
  2. Check the door history (Schedules, Codes and the Door History) for any use since it went missing.
  3. Issue a new one and note the change on your list.
Watch out
Shared codes have to be changed for everyone
If several people used the same keypad code, removing one person means changing the code for all of them. That's the best reason to give each person their own.
Why it helps
What this does for you
A lost fob is a two-minute fix instead of a locksmith bill, and an employee who leaves can't come back after hours.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Privacy and Security

Fire Exits and Electric Locks

Locking people out is the goal. Locking people in during a fire is the danger. Any door that people use to get out of the building in an emergency has rules, and electric locks on those doors have extra ones.

The general principles

  • An exit door must open from the inside easily, without a key, a code or special knowledge.
  • Magnetic locks, the kind that hold a door shut with an electromagnet, release when power is cut. Fire codes generally require a way to release them from the inside, such as a push button or sensor, and they're typically tied to the fire alarm so they release when it sounds.
  • Some electric locks stay locked when power fails ("fail secure") and others unlock ("fail safe"). Which one belongs on which door is a code question, not a preference.
  • Rules depend on the kind of building and the code your area has adopted.

Checked against Allegion on November 15, 2026.

Safety
Have exits checked, every time
Before you add any lock, keypad or electric hardware to an exit door, talk to a licensed locksmith or access-control installer, and check with your local fire department or fire marshal. Never chain, bar or padlock an exit door during business hours.

What you can safely do yourself

  • Put a smart deadbolt on a door that is not a required exit, such as an office door inside the shop, if your landlord agrees.
  • Walk every exit once a month: it opens from inside, nothing is stacked in front of it, and the exit sign is lit.
  • Ask your installer to show you how each electric lock behaves when the power is off.
Good to know
Renting your space?
Your lease may say who can change locks and add wiring. Ask your landlord in writing before you install anything on a door.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Privacy and Security

Privacy, Signs, Sound and Employees

Cameras work best when everyone knows they're there. Being open about them discourages trouble, builds trust with your staff and keeps you on the right side of the law.

Post a sign

A simple sign at each entrance, such as "Video recording in use," tells customers and visitors they're being recorded. It also tells a would-be thief the same thing. Signs are inexpensive at any hardware or office-supply store.

Be careful with sound

Many cameras can record audio as well as video. Recording sound is where the law gets stricter: recording conversations you're not part of can fall under wiretap laws, and the rules differ from state to state. Many businesses simply turn audio recording off on every camera. If you want to record sound, ask your attorney first.

Watch out
Audio is often on by default
Check each camera's settings for an Audio or Record audio switch. Some apps ask about audio during setup; others turn it on without asking.

Your employees

  • Tell staff in writing where cameras are and why. Many businesses put it in the employee handbook.
  • Never put cameras in restrooms, changing areas or anywhere people expect privacy.
  • Think twice about break rooms and private offices.
  • Use cameras for safety and security, not to watch one person all day.
  • If you have union employees or a specific workplace concern, talk to an attorney.

Privacy masks

Most systems let you black out part of a picture, such as a neighbor's window or a pharmacy counter where customers discuss health. On Reolink it's under the camera's Display settings as Privacy Mask.

Checked against Reolink Support (sibling check) on November 15, 2026.

Good to know
This is general information, not legal advice
Laws on cameras, audio and the workplace vary by state and change over time. For your situation, ask an attorney or your business insurance agent.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Safety, Privacy and Security

Keeping the System Itself Secure

A camera system that's connected to the internet is also a computer on your network. Treat it like one. These habits keep strangers from peeking in, and keep your recorder working.

The short list

  1. Strong, unique passwords on the recorder, every app account and every lock account. No defaults.
  2. Two-step sign-in on the app accounts wherever it's offered. Reolink, for example, has 2-Step Verification on your Reolink account using an authenticator app, with backup codes.
  3. Update the firmware on the recorder and cameras a few times a year, or turn on automatic updates. In the Reolink app it's in the recorder's settings under firmware update; Lorex recorders can check automatically.
  4. Don't open ports on your router for the recorder unless an installer insists and explains why. The brand's app reaches the recorder without it.
  5. Keep the recorder locked up, with its screen locked when nobody's using it.
  6. Review users twice a year: cameras, locks and app accounts.

Checked against Reolink Support and Lorex Help (sibling check) on November 15, 2026.

Watch out
Don't power off during an update
A firmware update takes a few minutes and the recorder restarts on its own. Unplugging it in the middle can leave it unusable.
Good to know
Older equipment
If you have a recorder from one of the makers mentioned in Taking Stock: What You Already Have, or any recorder that no longer gets updates, keep it off the open internet and plan to replace it when the budget allows.
Why it helps
What this does for you
Your video stays yours, your cameras keep recording, and a weak password on a camera never becomes the way into your business computers.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Power, Problems and Scams

Power Outages and Battery Backup

Thieves know that storms knock out power. A short outage shouldn't leave your business blind, and a power flicker shouldn't damage a recorder.

Battery backup for the recorder

A UPS (uninterruptible power supply) is a battery box that plugs into the wall; you plug the recorder into it. When the power goes out, the recorder keeps running on the battery. Because PoE cameras get their power from the recorder (NVR, DVR and PoE in Plain English), they keep running too, as long as the recorder does.

Checked against Reolink Support (sibling check) on November 15, 2026.

  • Also put the internet modem and router on a UPS if you want to watch from your phone during an outage.
  • Add a separate PoE switch to the UPS if your cameras are powered from one.
  • UPS batteries wear out after a few years. Most beep or show a warning when it's time to replace one.
  • Look at the UPS maker's runtime chart to see how long it will last with your equipment plugged in.
Tip
Test it
Once a year, during business hours, unplug the UPS from the wall and watch the cameras on your phone. Note how long they stay up. Plug it back in.

Locks and outages

  • Battery smart locks keep working without house power. Wi-Fi features stop until the internet returns, but saved codes still work at the keypad on locks like the Schlage Encode Plus (Keypad and Smart Locks for a Small Business).
  • Card systems usually have their own backup battery in the controller. Ask your installer how long it lasts and how each door behaves when it runs out (Fire Exits and Electric Locks).
  • Keep the override key where you can reach it.
Why it helps
What this does for you
Your cameras keep watching through the storm, your recorder doesn't get damaged by power blinks, and staff can still get in in the morning.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Power, Problems and Scams

When Something Isn't Working

Most camera problems come down to a handful of causes. Work through these calmly before you buy anything.

A camera shows "offline" or "video loss"

  1. Check whether only one camera is affected, or all of them.
  2. If only one: look at the cable at both ends, and try that camera in a different port on the recorder or switch.
  3. If all: check that the recorder and the router are on. Restart the recorder from its menu, not by pulling the plug, if you can.
  4. Look for a firmware update for the recorder (Keeping the System Itself Secure).
  5. If a PoE camera works on a short cable but not the long one, the cable run may be damaged or too long.

Checked against Reolink Support (sibling check) on November 15, 2026.

You can see the cameras at the shop but not on your phone

  • Check the shop's internet is working.
  • On Reolink, the recorder's UID feature must be on for remote viewing.
  • Sign out of the app and back in, and update the app.

You forgot the recorder's password

Many recorders offer a recovery option, such as security questions or a recovery email, if you set it up in advance. Some Reolink recorders, for example, support a recovery email while connected to the internet. If there's no recovery option, the last resort is a reset, which erases the settings, including user accounts. Check the brand's support page for your model number before you do it.

Checked against Reolink Support (sibling check) on November 15, 2026.

Watch out
Before any reset
Export any video you might need first (Exporting a Clip for the Police or Your Insurance). A reset can erase settings, users and sometimes the recording schedule, and you'll have to set up the app connection again.

A smart lock won't respond

  • Change the batteries first. It's the most common fix.
  • Check the Wi-Fi at the door; the app may show the lock as offline even though the keypad still works.
  • Use the override key if you're locked out, then sort it out from inside.
Tip
Call the right support line
Get the maker's support number from its own website, the box or your receipt, never from an ad at the top of a search. Scams Aimed at Business Owners with Cameras explains why.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Power, Problems and Scams

Scams Aimed at Business Owners with Cameras

Owners of camera systems get their share of scams. Knowing the common ones takes away most of their power.

Fake tech support

You search for your camera brand's support number and call the first result, which turns out to be an ad for a scammer who wants remote access to your computer and a payment. Or someone calls you, claiming your cameras "have been hacked." Real companies don't call out of the blue, and the FTC says pop-ups and unexpected calls telling you to call tech support are scams.

Scam alert
"We noticed your camera was hacked"
Hang up. Never let a caller remote into your computer or pay by gift card, wire or cryptocurrency. Look up the brand's real support number on its own website.

Blackmail emails

An email says, "I hacked your camera and recorded you," sometimes quoting an old password of yours from a data breach, and demands Bitcoin. The FTC says these are scams. Don't pay and don't reply. Change that old password anywhere you still use it.

Scam alert
Old password in the email?
It came from an old data breach, not from your cameras. It's a reason to change that password, not to pay.

Fake police or insurance requests

A message asks you to upload footage or sign in to your camera account through a link. Only use links you got directly from the officer or adjuster, and call them back at a number you already have (Exporting a Clip for the Police or Your Insurance).

High-pressure door-to-door sales

Someone shows up offering a "free" camera system in exchange for a long monitoring contract. Take the paperwork, don't sign that day, and read the contract length and cancellation terms.

Checked against FTC (sibling check) on November 15, 2026.

Tip
Report it
Report scams to the FTC at ReportFraud.ftc.gov. If money was taken, call your bank right away.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Help and Your Cheat-Sheet

When to Call Bill

You can do a lot of this yourself, and I hope this guide helps. But some jobs go faster and safer with a hand. Here's an honest list of when a call makes sense.

Good reasons to call

  • You inherited a system and nobody knows the passwords.
  • You need a clip exported for the police or your insurance today and can't get it off the recorder.
  • You want help choosing between a recorder system and cloud cameras for your shop.
  • You'd like cameras set up on your phone, and staff access set up properly with their own logins.
  • An employee left and you want to be sure they can't see the cameras or open the doors.
  • Cameras keep dropping offline, or alerts are driving you crazy.
  • You want to know how many days your recorder actually keeps.

What I'll send to a specialist

Some jobs belong to licensed trades: running cable through fire-rated walls, wiring electric locks on exit doors, and anything involving the building's electrical panel or fire alarm. I'll tell you plainly when that's the case.

What working with me is like

I'm Bill, and I serve Portage County, Ohio, with more than 30 years of professional experience. I go at your pace, explain what I'm doing, and write down what we set up so you're not dependent on me.

From Bill
How to reach me
$49 remote · $99 in your home, or at your business. Call (330) 200-8042 or book a time at billshometech.com/book.
Good to know
Who answers the phone
If I'm with another customer, Sophie, my AI receptionist, may answer the phone or the website chat. She can take your details and book a time for you.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Help and Your Cheat-Sheet

Your Business Cameras & Door Access Cheat-Sheet

The essentials from this guide, on one page.

TopicRemember
RetentionHow many days of video you keep. Aim for at least 30; check yours (Hard Drives: How Many Days of Video You Keep).
Export a clipUSB flash drive in the recorder, Backup, pick time and cameras, MP4 (Exporting a Clip for the Police or Your Insurance).
Staff accessShare with their own account, view-only, only the cameras they need (Giving Staff Their Own Access).
Someone leavesRemove camera access, door codes and cards the same day (When Someone Leaves: Cameras and Removing Someone, and Lost Fobs).
Lost fobTurn it off right away, check the door history (Removing Someone, and Lost Fobs).
Exit doorsMust open from inside without a key; ask a pro before adding locks (Fire Exits and Electric Locks).
AudioUsually best off. Ask an attorney before recording sound (Privacy, Signs, Sound and Employees).
SecurityNo default passwords, two-step sign-in, firmware updates (Keeping the System Itself Secure).
PowerRecorder, router and PoE switch on a battery backup (Power Outages and Battery Backup).

Write it down once

ItemYours
Camera brand and recorder model____________________
Where the recorder is____________________
App account email____________________
Recorder admin password kept at____________________
Days of video it keeps____________________
Lock or access system and app____________________
Override key kept at____________________
Installer or dealer and phone____________________
Who has camera access____________________
Who has codes, cards or fobs____________________
Watch out
Keep this private
Store this somewhere locked, not taped to the recorder. Write where the password is kept, not the password itself, if others might see it.

When something's wrong, in order

  1. If anyone is in danger or a crime is happening, call 911.
  2. Save the video of the incident today (Exporting a Clip for the Police or Your Insurance).
  3. If a code, card or login may be in the wrong hands, turn it off now (When Someone Leaves: Cameras and Removing Someone, and Lost Fobs).
  4. Check power and internet at the business (Power Outages and Battery Backup and When Something Isn't Working).
  5. Look up the maker's real support line on its own website.
  6. Still stuck? Call Bill at (330) 200-8042.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
Step 1 of 5
1