Bill's Home Tech
ADT & Monitored Alarms — help from Bill

ADT & Professionally Monitored Alarms

What are you trying to do?

Type it in plain words — like "cancel a false alarm" or "how do I cancel my contract."

Quick guides for one question
This manual covers ADT & Professionally Monitored Alarms from start to finish. These short guides each answer one question.
Keep it handy
Reading is free, with no sign-up. If you'd like, we can email you the link.
Bill's Home Tech · All manuals · (330) 200-8042 · Serving Portage County, Ohio
Prefer paper? Print this guide
All topics
Getting Started

A Note from Bill

Hello, and welcome. Maybe you've had an ADT sign in the flower bed for twenty years and never been quite sure what happens when the alarm goes off. Maybe you just moved into a house with a keypad by the door and a sticker from a company you've never called. Or maybe someone knocked on your door last week offering a "free upgrade" and you'd like to know whether to believe them. Whichever it is, this guide is for you.

I'm Bill. I've spent more than 30 years working with technology, and these days I help folks here in Portage County feel at home with theirs. Alarm systems are part of that now: they have apps, codes, cellular radios, contracts and monthly bills. I wrote this guide the way I'd explain it sitting at your kitchen table: patiently, in plain English, and without trying to sell you anything. I don't sell alarm systems or monitoring, so I have no reason to steer you toward one company.

What this guide will do for you

  • Explain what "professional monitoring" actually covers: who watches, what they do when an alarm comes in, and what they don't do.
  • Help you find the right app and account for your system, whether it's ADT, Vivint or Brinks Home.
  • Walk you through codes, the duress code, your verbal password and your emergency contact list.
  • Show you how to cancel a false alarm calmly, and how Ohio towns handle permits and false-alarm fees.
  • Lay out contracts, moving, and canceling in plain words, before you sign anything.
  • Help you spot door-to-door "upgrade" scams, and compare monitored and do-it-yourself systems honestly.

The big promise: you can't break it

Pressing the wrong button on a keypad won't damage anything. The worst that usually happens is a loud siren and a phone call from the monitoring center, and The First Minute of an Alarm: Real or False shows you exactly how to handle that. The few things that really matter, like your codes, your verbal password and the contract, I'll mark clearly.

Why it helps
Why this matters
When you understand your alarm, you use it more, you trip it by accident less, and you're far harder to fool. That's real peace of mind, and it's worth more than any feature on the box.

And I'm only a phone call away

If anything in this guide leaves you unsure, call me at (330) 200-8042. There's no such thing as a silly question, especially about a beeping keypad at two in the morning.

Let's start with what "monitored" really means.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Ways Your Monitored Alarm Can Make Life Easier

A monitored alarm does more than make noise. These three features, offered by ADT and Brinks Home on many plans, take some of the worry out of everyday life: handling a false alarm by text, a reminder to update your contacts before a trip, and a nudge on your phone if you leave without arming. Other companies have similar options; ask yours.

1. Handle a false alarm by text instead of a phone call

Why it helps
Why this helps
If you can't hear the phone over the siren, or you're out and can't talk, a text lets you deal with the alarm quickly. ADT's Alarm Messenger texts you and your emergency contacts a secure link to a shared session, where you can verify or cancel the alarm. Brinks Home's text alarm notifications let you reply No to cancel or Yes to ask for emergency help.
  1. Call your alarm company, or look in your account website, and ask whether text alarm notifications are available on your plan.
  2. Make sure the mobile numbers on your emergency contact list are correct, since those are the phones that get the texts.
  3. Save the company's text number in your phone's contacts so you'll recognize the message.
  4. When an alarm text arrives, read it calmly. For ADT, tap the link in the text from ADT to open the session and choose to verify or cancel. For Brinks Home, reply as the text instructs.
  5. If you're not sure whether the alarm is real, don't cancel. Let help come, or call 911.
Tip
Good to know
Availability depends on your company, panel and plan. Only act on alarm texts that arrive while your alarm is actually going off, and only from the number you saved; a surprise text with a link on a quiet day is more likely a scam.

Checked against the ADT Help Center and the Brinks Home Help Center on November 15, 2026.

2. Get a reminder to update your contacts before a trip

Why it helps
Why this helps
When you're away, the first person the monitoring center calls should be someone nearby, not you on a beach in Florida. ADT's Travel Reminders feature in MyADT emails you 48 hours and 24 hours before a trip begins, reminding you to update your emergency contacts.
  1. Sign in to your account at myadt.com, or in the MyADT app.
  2. Look for Travel Reminders and enter your trip dates.
  3. When the reminder emails arrive, open Emergency Contacts and move a nearby neighbor or relative to the top of the list.
  4. Make sure that person knows your verbal password or has their own.
  5. When you're home again, put your list back the way you like it.
Tip
Good to know
Included with MyADT accounts; menu names may look a little different on your screen. Other companies can do the same thing if you call them before you leave. Free either way.

Checked against the ADT Help Center on November 15, 2026.

3. Get a nudge if you leave without arming

Why it helps
Why this helps
Everybody forgets sometimes. The Brinks Home app's Places feature (once called Geo-Services) can remind you to arm when your phone leaves home, and its Daily Arming Reminder alerts you if you've left without arming the system.
  1. Open the Brinks Home app and sign in with a login that has full control of the system.
  2. Find Places and set the area around your home.
  3. Allow the app to use your phone's location when it asks, including when the app is closed.
  4. Turn on arming reminders for leaving the area, or turn on the Daily Arming Reminder in the app's system notifications.
  5. The next time you drive away without arming, check that the reminder arrives.
Tip
Good to know
Uses your phone's location, so it only works when your phone is with you and its location setting is on. You need to travel a fair distance past the edge of the area for the app to notice. ADT, Vivint and other apps have similar reminders; ask your company.
From Bill
Want help setting these up?
I'm happy to sit down with you, check your contact list, and set up alarm texts and reminders on your phone so they work the way you want. $49 remote · $99 in your home.

Checked against the Brinks Home Help Center on November 15, 2026.

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

What "Professionally Monitored" Really Means

A professionally monitored alarm is one that reports to a central station (also called a monitoring center): a room full of trained people, open 24 hours a day, whose job is to respond when your system sends a signal. A self-monitored alarm only alerts you, usually with a phone notification and a siren. Nobody else is watching.

The chain of events, in plain words

  1. A sensor trips: a door opens while the system is armed, smoke reaches a monitored detector, or someone presses a panic button.
  2. If it's a door you normally use, the keypad gives you a short entry delay to type your code (Entry & Exit Delays and Avoiding False Alarms).
  3. If the code isn't entered, the panel sounds the siren and sends a signal to the central station over its communicator: cellular, internet or, on older systems, the phone line (How Your System Reaches the Monitoring Center).
  4. An operator sees which sensor tripped and usually tries to reach you first, by phone, or on some plans by text, to ask whether it's real. This is the verification call.
  5. If you answer and give your verbal password (Your Verbal Password & Emergency Contacts), the operator can cancel. If nobody answers, or the password is wrong, they contact the police, fire department or ambulance.
  6. Your emergency contacts are called in the order you chose.

ADT's help pages describe the same pieces. You need at least one emergency contact, ADT recommends at least three, and if nobody on the list can be reached, ADT contacts the local authorities.

Checked against ADT Help Center on November 15, 2026.

What monitoring does NOT do

  • Operators don't drive to your house. They call the authorities, who decide how and when to respond.
  • It doesn't watch your cameras around the clock unless your plan specifically includes live video monitoring.
  • It only covers the sensors connected to the system. A stand-alone smoke alarm from the hardware store isn't monitored just because you have an alarm company (Fire, CO, Water & Medical Monitoring).
  • It can't help if the system can't reach the center: a dead phone line, an old 3G radio or a long power outage can leave it silent (How Your System Reaches the Monitoring Center and Power Outages, Batteries & Trouble Beeps).
Good to know
"Fire, CO and medical" are separate signals
A burglary signal, a fire signal, a carbon monoxide signal and a medical or panic signal are handled differently. Fire and CO are usually treated as more urgent. Fire, CO, Water & Medical Monitoring explains which ones your plan covers and how to check.
Why it helps
What this does for you
Knowing the steps takes the panic out of an alarm. You'll know the phone will ring, what they'll ask, and what happens if you don't answer.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

ADT, Vivint & Brinks Home at a Glance

These are three of the best-known names in professionally monitored home security. They all offer 24/7 monitoring, an app and smart-home extras, but they sell and charge differently.

ADTVivintBrinks Home
How it's soldProfessional install, or ADT self-setup kitsProfessional install, usually after an in-home or phone consultationProfessional or self-install packages
Main app todayADT+ (older systems: ADT Control, ADT Pulse)Vivint appBrinks Home app
Contract36 months for pro-installed in most statesSet by your service and financing agreementCommonly a 3-year term
EquipmentDepends on your agreement; ask who owns itTypically paid up front or financedBought with a package or financed

Contract lengths in this table are the usual terms as of November 2026. ADT's residential terms describe a 36-month monitoring contract (24 months in California), and Brinks Home says its term is usually 36 months. Your own paperwork is what actually counts; Reading the Contract Before You Sign shows you what to look for.

Checked against ADT Residential Terms and Brinks Home Help Center on November 15, 2026.

Other names you may see

  • Local and regional dealers — many smaller companies install panels and resell monitoring from a central station they contract with. The sticker on your keypad may be the dealer, not the monitoring center.
  • Panel makers — names like Honeywell (Resideo), DSC, Qolsys or 2GIG are the hardware makers. The company you pay each month is the one that monitors it.
  • Alarm.com — a platform many dealers use behind their own app. You might see its name in an app or on a login page.
Tip
Find out who actually monitors you
Look at your most recent bill or bank statement. That's the company you have a contract with. Write its name and its customer-service number (from the bill, not from a web search) in the Cheat-Sheet in Your Monitored Alarm Cheat-Sheet.
Why it helps
What this does for you
When the keypad beeps or a stranger knocks claiming to be "from your alarm company," you'll know exactly who your company is and how to reach the real one.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Getting Started

Which App & Account Go with Your System

Over the years each company has had several apps. Using the wrong one is a common reason people think their system "doesn't have an app." Here's how to sort it out.

ADT: ADT+, ADT Control, ADT Pulse and MyADT

  • ADT+ is ADT's newest app. It goes with the newer ADT+ systems, and it can also control Google Nest cameras, doorbells and thermostats in the same app.
  • ADT Control goes with many ADT Command panels (the touchscreen wall panels). If your system is a few years old and has a large touchscreen, this may be your app.
  • ADT Pulse is an older platform; some homes still use its app.
  • MyADT (myadt.com and its app) is your account: bills, documents, emergency contacts and your verbal password.

Checked against ADT on November 15, 2026.

Vivint and Brinks Home

Vivint customers use the Vivint app together with the Smart Hub touch panel on the wall. Brinks Home customers use the Brinks Home app and an online Customer Portal for billing and account changes.

Getting the right app

  1. Find the name printed on your wall panel or keypad, and the company name on your bill.
  2. Open the App Store (iPhone) or Play Store (Android) and search for that company's name.
  3. Check that the developer listed under the app name is the company itself, for example "ADT LLC" or "Vivint". Skip look-alike apps.
  4. Open the app and choose Sign in. If you've never had a login, look for Create account or Register; you'll usually need your account number from a bill.
  5. If it says your system isn't supported, try the company's other app (for ADT, try ADT Control or Pulse), or call the number on your bill and ask which app your panel uses.
Watch out
One login per person
Don't share one login around the family. Most apps let the account holder add other users with their own logins and their own codes, so you can remove one person later without changing everything.
Why it helps
What this does for you
With the right app you can arm and disarm from your chair, see who disarmed it and when, and get an alert on your phone the moment something trips.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Equipment

The Panel, Keypad & Sensors

Every monitored system, old or new, has the same few parts. Knowing their names makes phone calls with the company much easier.

The pieces

PartWhat it does
Control panel or hubThe "brain." On older systems it's a metal box in a closet or basement; on newer ones it's the touchscreen or a small hub (ADT Base, Vivint Smart Hub).
KeypadWhere you type your code to arm and disarm. Some panels are the keypad too.
Door and window sensorsTwo small pieces, one on the door and one on the frame. When they separate, the system knows the door opened.
Motion detectorUsually high in a corner. Notices movement in a room when you're away.
Glass-break sensorListens for the sound of breaking glass.
Smoke, heat and CO detectorsOnly monitored if they're connected to the alarm system (Fire, CO, Water & Medical Monitoring).
SirenBuilt into the panel, plus sometimes a separate loud one.
CommunicatorThe part that sends signals out: a cellular radio, an internet connection or a phone-line dialer (How Your System Reaches the Monitoring Center).
Key fob or panic pendantA small remote to arm, disarm, or call for help.

Finding your panel's model

  1. Look on the front or bottom edge of the keypad or touchscreen for a brand and model name.
  2. If there's a metal box in a closet or basement, look inside the door (don't touch the wiring) for a label.
  3. Write both on the Cheat-Sheet in Your Monitored Alarm Cheat-Sheet. Steps for codes and settings are different on each model, so this name is what you'll search for or read to the company.
Safety
Leave the metal box alone
The control box connects to household power through a transformer and to a backup battery. Opening it can set off a tamper alarm, and on some systems it's still the alarm company's equipment. Let a technician handle anything inside it.
Why it helps
What this does for you
When you can say "my front-door sensor" or "my Command panel," a support call takes minutes instead of an hour, and you can tell whether a "technician" at your door actually knows your system.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Equipment

How Your System Reaches the Monitoring Center

This is the part most people never think about, and it matters most. If your alarm can't get its message out, the monitoring center never knows anything happened.

The three ways a system "calls out"

PathHow it worksWeak spots
Landline (phone line)An older dialer calls the center over your home phone linePhone companies are retiring copper lines; a cut line silences it
CellularA built-in radio, like a cell phone, talks to the centerNeeds a supported network; old 2G and 3G radios stopped working
Internet (broadband)Signals go over your home Wi-Fi or a cable to the routerFails if the internet or router loses power

Many systems today use cellular as the main path, with internet as a second path. That's generally the most dependable setup.

The 3G shutdown

In 2022 the big cellular carriers switched off their old 3G networks, and the 2G networks before them were already gone. Home security systems were among the products that depended on them. An alarm with a 3G radio that was never replaced can no longer reach the monitoring center by cellular, even though the keypad and siren still work.

Landline retirement

Phone companies are also retiring old copper phone lines, and on March 26, 2026 the FCC adopted an order that made it easier for carriers to do so. If your phone company moves you to a new kind of phone service, an old alarm dialer may stop working without any warning on the keypad.

Checked against FCC on November 15, 2026.

How to check your system

  1. Call the number on your alarm bill and ask: "How does my system send signals, landline, cellular or internet? Is the cellular radio current?"
  2. If you've dropped your landline or changed phone service, tell them so.
  3. Ask them to put your system on test, then trip a sensor and confirm they received it. (Test Mode & a Simple Monthly Check explains test mode.)
  4. Ask whether any upgrade is needed, and what it costs, in writing.
Scam alert
The "your radio is out of date" visit
The 3G shutdown and landline changes are real, and scammers use them. If someone calls or knocks to say your system "will stop working" unless you upgrade today, hang up or close the door, then call the number on your own bill to ask. Door-to-Door Sales & "Upgrade" Scams has more.
Why it helps
What this does for you
Five minutes on the phone tells you whether your alarm can actually call for help, instead of finding out the night you need it.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Equipment

Power Outages, Batteries & Trouble Beeps

A monitored system plugs into the wall, but it's built to keep running for a while when the power goes out.

What happens in an outage

  • The panel switches to its backup battery. Depending on the system, that typically lasts from several hours to about a day.
  • A cellular communicator usually keeps working on the backup battery. An internet-only path stops when your router loses power, unless the router is on a battery backup (UPS) too.
  • Many panels send an "AC power loss" signal to the center after a while, and beep or show a message.

Trouble beeps and messages

A steady pattern of beeps, often with a word like Trouble, Check, Low Battery or Comm Failure on the screen, means the panel wants attention. It is not an alarm.

  1. Read the message on the keypad or app. Write it down exactly.
  2. On most keypads, entering your code once (or pressing a key such as * or Status) silences the beeping for now. Your panel's guide gives the exact key.
  3. Low battery on a sensor: the sensor's name is usually shown. Many sensors use a small lithium coin or CR123A battery; check the old one before buying a new one.
  4. Low battery on the panel itself, or "AC loss": check that the panel's plug-in transformer is still plugged in and the outlet isn't on a switch.
  5. "Communication" or "Comm" trouble: call the company. This is the one that means it may not be able to reach the center.
Tip
Batteries wear out, even with power
The panel's backup battery is usually replaced every few years. If the system beeps for low battery right after every storm, the battery is probably tired. Ask your company whether it's covered under your service plan or warranty.
Safety
In a long outage
If you use a generator, keep it outdoors and well away from the house. Generators produce deadly carbon monoxide. Your alarm doesn't need a generator to keep calling out for the first part of an outage.

Checked against CPSC (sibling check) on November 15, 2026.

Why it helps
What this does for you
Once you know a trouble beep from a real alarm, a 3 a.m. chirp becomes a five-minute fix instead of a sleepless night.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
The Equipment

Fire, CO, Water & Medical Monitoring

Burglary is only part of the story. For many people, the most valuable thing monitoring can do is call the fire department when nobody's home to hear the smoke alarm.

What's covered depends on two things

  • The right detectors. The smoke, heat or CO detector has to be part of the alarm system, either wired or wireless to the panel. Regular battery smoke alarms aren't monitored, however many you have.
  • The right plan. Not every plan or package includes fire and CO monitoring. Ask your company, and look for the words "fire," "smoke" or "carbon monoxide" in your monitoring agreement.

Water and freeze

Some plans also cover flood and low-temperature sensors, handy for basements and for snowbirds. Coverage varies by company and plan, so ask: "If my water sensor trips, do you call me, or only send an app alert?"

Medical and panic buttons

Many keypads have emergency buttons. Vivint's Go!Control panel, for example, has three 24-hour emergency choices: Panic, Fire and Emergency. Tapping the emergency button only opens the emergency screen; you then press and hold your choice for at least two seconds to send it. Fire sends a fire report to the monitoring station and sounds the fire horn; Emergency sends an emergency report and sounds the siren. The installer decides which of the buttons appear.

Checked against Vivint Go!Control User Manual on November 15, 2026.

  1. Ask your company which emergency buttons your keypad has and what each one sends.
  2. Ask whether a wearable pendant is available for your system and whether it works in the yard.
  3. With the company's help, put the system on test and try each button once, so you know how long to hold it.
Good to know
Monitored detectors and your own alarms
You still need working smoke alarms in the right places, and CO alarms on every level. Monitoring adds a call for help; it doesn't replace the alarms that wake you up. Bill's Smart Smoke & CO Alarms guide covers placement and testing.
Why it helps
What this does for you
A monitored smoke or CO detector means help can be on the way even when you're out, asleep, or unable to reach a phone.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Arming & Disarming: Stay, Away & Off

Most systems have two ways to arm. The names differ a little between companies, but the idea is the same.

ModeWhat it means
Stay (or Home)Doors and windows are armed; motion detectors inside are off, so you can move around. Use it at night or when you're home.
AwayEverything is armed, including motion detectors. Use it when the house is empty.
Off (Disarmed)Nothing triggers a burglary alarm. Fire, CO and panic signals usually still work.
Night (some systems)Like Stay, but may also arm a few chosen motion sensors, such as a downstairs one.

Arming from the keypad

  1. Close the doors and windows. Most keypads show a "Ready" light or message when everything is shut.
  2. Press Stay or Away (on some keypads you enter your code first, then the button).
  3. For Away, the exit countdown starts. Leave by the door you normally use and close it behind you.

Disarming

  1. Come in by your usual entry door. The keypad beeps to remind you.
  2. Enter your code before the countdown ends. On many keypads you press Off or Disarm after the code.
  3. If you make a mistake, just enter it again calmly. You usually have more than one try within the countdown.

Arming from the app

In the ADT+, ADT Control, Vivint or Brinks Home app, the home screen shows the system's state with buttons for each mode. Tap the mode you want; some apps ask for a code or Face ID first. The app also shows which door or window is open if the system won't arm.

Tip
"Bypassing" a window
If a window sensor is broken or you want one window open a crack, most systems let you bypass that one sensor for this arming only. That window is then unprotected. Your panel's guide or the app shows how.
Why it helps
What this does for you
Using Stay every night costs you nothing and means a door opening at 3 a.m. gets noticed, while you can still walk to the kitchen for a glass of water.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Entry & Exit Delays and Avoiding False Alarms

Most false alarms come from ordinary life: someone who forgot the code, a door left ajar, a pet, a balloon drifting past a motion detector. A few habits prevent nearly all of them.

The countdowns

  • Exit delay — the time you have to leave after arming Away.
  • Entry delay — the time you have to enter your code after coming in.
  • Only the doors you normally use have a delay. A window or back door may alarm instantly.

The company or installer can lengthen the delays if you need more time, for example if you walk with a cane or the keypad is a long way from the garage door. Just ask.

Habits that prevent false alarms

  1. Teach everyone who has a code how to arm, disarm and cancel, and let them practice once with the system on test.
  2. Before arming Away, check that pets can't reach rooms with motion detectors, unless they're pet-friendly sensors set up for your pet's size.
  3. Keep balloons, hanging plants and space heaters out of a motion detector's view.
  4. Fix sticky doors and loose sensors; a door that rattles in the wind can trip.
  5. Tell the company before painting, remodeling, or having cleaners or a pet sitter with a new code.
  6. Replace sensor batteries when the keypad asks, not months later.
Watch out
Grandkids and the panic button
A curious little finger on the keypad's emergency buttons sends a real emergency signal. If you have young visitors, show them it's not a toy, or ask the company whether a keypad's panic keys can be set to need a code.
Why it helps
What this does for you
Fewer false alarms means no embarrassing police visits, no fees (Alarm Permits & False-Alarm Fees in Ohio), and operators and officers who take your alarm seriously when it counts.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Codes: Master, User & Guest Codes

Your codes are the keys to your house. Treat them that way.

The kinds of codes

CodeWhat it does
Master codeBelongs to the main account holder. Can arm, disarm and add or remove other codes.
User codesOne for each person: family, a caregiver, a regular helper. They arm and disarm, but can't change codes.
Guest or temporary codesMany newer systems let you set a code that only works on certain days or times, for cleaners or a dog walker.
Installer codeUsed by technicians to program the panel. You don't need it, and you shouldn't give it to anyone who calls you.

Adding or changing a code

On the newer apps (ADT+, ADT Control, Vivint, Brinks Home) look for a menu called Users, Codes or Access. Brinks Home's help pages, for example, put user codes under Users in its app, and let you delete a code or give it an expiration date. On older keypads, the button steps depend on the panel model, so use your panel's own guide or ask the company.

Checked against Brinks Home Help Center on November 15, 2026.

  1. Find your panel's model (The Panel, Keypad & Sensors) and its user guide on the company's website, or call the company.
  2. Make a list of who has a code. Give each person their own.
  3. Remove codes for anyone who no longer needs one: a former caregiver, a contractor, a relative who moved.
  4. Change the master code if it's still the one the installer gave you, or anything easy to guess.
Watch out
Pick codes that aren't obvious
Avoid 1234, 0000, your house number, birth year or the last four of your phone number. Those are the first things a burglar tries. Also wipe the keypad now and then; worn or smudged keys can give away which digits you use.
Why it helps
What this does for you
Separate codes mean you can see who came and went, and you can take away one person's access in a minute without changing everyone else's.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

The Duress Code & Panic Buttons

A duress code is a special code you enter if someone is forcing you to turn the alarm off. The keypad looks like it disarmed normally, but a silent signal goes to the monitoring center.

How it works

  • Monitoring centers treat a duress signal as a silent call for police. Ring, for example, says its center immediately requests police dispatch and doesn't call your emergency contacts; Frontpoint says it dispatches police without calling you first, because a call could put you in danger. Exact handling varies by company.
  • It only helps if the system is professionally monitored. On a self-monitored system there's nobody to receive it.
  • How the code is set varies. On some older panels it's a fixed pattern, such as one digit higher than your master code; on others you choose any code. Ask your company exactly how yours works.

Checked against Ring Help and Frontpoint Help on November 15, 2026.

Setting one up

  1. Ask your company or check the app's codes menu: "Does my system have a duress code, and how do I set it?"
  2. Choose a code you could enter under stress, but that you won't use by accident.
  3. Write it in a safe place, not on the keypad or on the Cheat-Sheet you keep by the door.
  4. Never test it without telling the company first. A duress signal is treated as a real emergency.

Panic buttons

A panic button (on the keypad, the app, a key fob or a pendant) sends an emergency signal right away, armed or not. Fire, CO, Water & Medical Monitoring covers which buttons send police, fire or medical help.

Safety
In a real emergency
If you're able to, call 911 yourself as well. A direct call gives the dispatcher details that no alarm signal can.
Why it helps
What this does for you
A duress code is a quiet way to call for help in the one situation where reaching a phone isn't possible.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Everyday Use

Your Verbal Password & Emergency Contacts

When the monitoring center calls, they need to know they're talking to the right person. That's what the verbal password (also called a passcode or security password) is for. It's different from your keypad code.

Your verbal password

  • The operator asks for it during an alarm call. Give the right one and they can cancel; give the wrong one, or none, and they'll treat the alarm as real.
  • Everyone on your emergency contact list should know it, or have their own if your company allows that.
  • ADT says its dispatch operators ask for the verbal password during an alarm, and customer service asks for it when you call. You can manage it in MyADT, under Verbal Passwords.

Checked against ADT Help Center on November 15, 2026.

Checking your emergency contacts

  1. Sign in to your account website or app (MyADT for ADT, or your company's app or customer portal).
  2. Find Emergency Contacts. In MyADT, ADT's help pages point to a Manage Contacts button in the Emergency Contacts section of the Overview page; other companies put it under Account or Monitoring.
  3. Check the order. The first person should be someone who answers the phone and lives nearby.
  4. Delete people who've moved away or passed on, and check every phone number.
  5. If you'll be away for a while, add a neighbor or reorder the list so a local person is first.
Watch out
Never give your password to a caller who phoned you out of the blue
The real monitoring center asks for your password when your alarm is going off. A caller asking for it on a quiet afternoon, "to verify your account" or "for an upgrade," is a red flag. Hang up and call the number on your bill.
Why it helps
What this does for you
An up-to-date list means the right person gets the call quickly, and a good password means a false alarm is canceled in seconds instead of ending with police at the door.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When the Alarm Goes Off

Test Mode & a Simple Monthly Check

The only way to know your alarm can really call for help is to test it, the right way. Done properly, a test sends signals to the monitoring center without anyone being dispatched.

What "on test" means

When you ask the company to put your account on test (some apps call it test mode), the central station still receives your signals, but it knows not to call the police or fire department for a set time, often an hour or so. When the time is up, the account goes back to normal on its own.

Running a test, step by step

  1. Call the number on your bill, or look in your company's app or account website for a test option. Say you'd like to put the system on test, and ask how long it will last.
  2. Give your verbal password when they ask for it (Your Verbal Password & Emergency Contacts).
  3. Arm the system the way you normally would, then open a protected door and let the entry delay run out. The siren will sound; that's expected.
  4. Disarm with your code.
  5. If your plan includes fire or CO monitoring, ask the company how they'd like those detectors tested. Many use the detector's own test button.
  6. Call back, or check the app, and ask: "Which signals did you receive?" Each sensor you tripped should be on their list.
  7. Make sure the account is taken off test before you hang up, or that you know when it will end.
Watch out
Never test without telling them first
If you trip a sensor or press a panic button without putting the account on test, it's a real alarm to the central station, and police or firefighters may be sent. That can also count as a false alarm with your town (Alarm Permits & False-Alarm Fees in Ohio).

A five-minute monthly check

  • Look at the keypad or app: does it say Ready, with no trouble messages?
  • Open the app and check that the last few events (arming, disarming) are listed with the right times.
  • Press the test button on each smoke and CO alarm, connected or not.
  • Make sure the panel's power supply is still plugged in, and nothing is blocking a motion detector.
  • Every few months, or after you change phone or internet service, do a full test with the company.
Why it helps
What this does for you
A short test gives you proof, not hope. If something isn't reaching the center, you find out on a quiet afternoon instead of during a break-in or a fire.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When the Alarm Goes Off

The First Minute of an Alarm: Real or False

The siren is loud on purpose. It's meant to startle. Take a breath. The steps below work whether you set it off by accident or something is really wrong.

If you know it's a false alarm

  1. Enter your code on the keypad, or disarm in the app. This silences the siren.
  2. Keep your phone close. The monitoring center will usually call within a minute or two.
  3. When they call, say it's a false alarm and give your verbal password. They'll cancel.
  4. If you miss the call, call the monitoring number on your bill or keypad sticker right away and do the same.
  5. If a police officer arrives anyway, be polite, explain, and show you can disarm the system. They're doing their job.
Good to know
Turning off the siren isn't always the same as canceling
On many systems, disarming quickly stops the signal before it's sent. But once the center has the alarm, only talking to them, or using their cancel option, stops the call to police. When in doubt, call them.

Text and app options

Some companies let you handle an alarm without a phone call. ADT's Alarm Messenger sends you and your emergency contacts a text with a secure link to a shared session, where you can verify or cancel the alarm. Brinks Home's text alarm notifications let you reply No to cancel or Yes to ask for emergency help. Whether you have these depends on your company and plan.

Checked against ADT Help Center and Brinks Home Help Center on November 15, 2026.

If it might be real

  1. Don't go looking. If you've just come home and the alarm is sounding, don't go inside.
  2. Get to a safe place: a neighbor's house, your car with the doors locked, or out the nearest door.
  3. Call 911 yourself and say your alarm is going off and you think someone may be inside.
  4. When the monitoring center calls, tell them too. Don't cancel.
  5. Wait for the police to say it's safe before going back in.
Safety
Fire or CO alarm
Smoke or carbon monoxide alarms mean get out first, then call 911 from outside. Don't stop to find the cause or to call the alarm company. Fresh air and distance come first.
Why it helps
What this does for you
With a plan in your head, a false alarm takes two minutes and a phone call instead of a police visit, and a real one gets you out of harm's way first.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When the Alarm Goes Off

Alarm Permits & False-Alarm Fees in Ohio

Many cities and villages have an alarm ordinance: a local law that asks you to register a monitored alarm and charges a fee when police answer too many false alarms. The rules depend on where you live.

An example close to home: Kent

The City of Kent's website says every alarm user must register each alarm system with the city's Emergency Communications Center, before it's put into use or within 15 days afterward, and keep the registration up to date when asked (at least every two years). The page also describes false-alarm fees that start with a third false alarm and climb with each one after that.

Checked against City of Kent on November 15, 2026.

Other towns handle it differently. Some require a permit, some only ask you to register, and some have no ordinance for homes at all. Fees, the number of "free" false alarms, and how long they count back vary from place to place.

Finding the rule for your town

  1. Search the web for your city or village name plus "alarm registration" or "false alarm," and look for a result on your town's own website (it often ends in .gov or .oh.us).
  2. Or call your police department's non-emergency number and ask: "Do I need to register my home alarm, and what are the false-alarm fees?"
  3. If you live in a township, ask the township office or the sheriff's non-emergency line.
  4. Ask your alarm company too. Many keep track of local permit rules and some will tell you if your address needs one.
  5. Write the permit number and renewal date on the Cheat-Sheet in Your Monitored Alarm Cheat-Sheet.
Tip
Who pays the fee?
False-alarm fees are usually billed to the homeowner, not the alarm company. Read your contract; some companies pass along fees, and none of them can make the fee go away once the town sends it.
Watch out
Pay fees only to your town
A real false-alarm fee comes on a letter or invoice from your city, village or police department. If someone calls demanding payment by gift card or wire, it's a scam. Hang up and call the town's number from its official website.
Why it helps
What this does for you
Registering keeps you on the right side of local rules, and gives dispatchers your contact details. The habits in Entry & Exit Delays and Avoiding False Alarms keep you from ever seeing a fee.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Contracts, Moving & Canceling

What Monitoring Really Costs

The monthly fee is only part of the cost. Before you sign, or when you're checking whether you're paying too much, add up all of these.

CostWhat to ask
EquipmentBought up front, financed over the contract, or bundled into a higher monthly fee. Ask who owns it when the contract ends.
InstallationSometimes free with a long contract, sometimes a one-time charge.
Monthly monitoringThe fee for the central station and the app. Video, cameras and smart-home control usually cost more.
Add-onsExtra sensors, cameras, a second keypad, a smart lock, or a service plan that covers repairs.
Price changesContracts often allow the company to raise the monthly fee. Look for how much notice they must give.
Ending earlyThe early-termination charge and any unpaid equipment balance (Canceling Monitoring Without Surprises).

Rough prices, as of November 2026

Prices change often and depend on the package, so treat these as a starting point, not a quote. Independent reviewers in 2026 list ADT's self-setup monitoring starting at roughly $25 a month, with video plans and professionally installed systems costing more. Vivint and Brinks Home price their plans by package and usually quote them during a sales consultation. For comparison, do-it-yourself systems with optional professional monitoring cost less per month (Monitored or Do-It-Yourself? An Honest Comparison).

Tip
Get the full number in writing
Ask for one sheet showing the equipment cost, installation, monthly fee, contract length, and the total you'd pay over the whole contract. If a salesperson won't put it in writing, that tells you something.
Why it helps
What this does for you
Knowing the real total lets you compare companies fairly, and keeps a "free equipment" offer from hiding a much bigger bill later.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Contracts, Moving & Canceling

Reading the Contract Before You Sign

Alarm contracts are long, and most people never read them. You don't have to read every word, but these few things are worth ten minutes with a cup of coffee.

How long it lasts

ADT's residential terms describe a 36-month monitoring contract for professionally installed systems (24 months in California). Brinks Home's help center says its monitoring plan is a contract for an agreed term, usually 36 months. Vivint's term is set by your service agreement and any equipment financing you sign. Look at your own paperwork for the exact start date and length.

Checked against ADT Residential Terms and Brinks Home Help Center on November 15, 2026.

The questions to answer before signing

  1. How many months is the contract, and what's the date it ends?
  2. Does it renew automatically at the end? If so, how much notice must you give to stop it, and how?
  3. What does it cost to cancel early?
  4. Who owns the equipment, and is any of it financed? Is that loan a separate agreement?
  5. Can the monthly price go up during the contract?
  6. What happens if you move (Moving: Taking Your Alarm Along, or Taking Over One)? If you pass away or move into care?
  7. Is there a trial period or a money-back promise, and what are its conditions?

Your three-day right to cancel

If you sign a home security contract in your home, or somewhere other than the seller's usual place of business, the FTC's Cooling-Off Rule generally gives you three business days to cancel, no reason needed, even if the system is already installed. The seller is supposed to give you a cancellation notice and form. The FTC also lists high-pressure sales tactics as a red flag.

Checked against FTC (sibling check) on November 15, 2026.

Watch out
Don't sign on a tablet you can't read
Many salespeople ask you to sign on a tablet screen. Ask for a printed or emailed copy of the whole contract first, and keep it. If they say you can't see it until after you sign, don't sign.
Why it helps
What this does for you
Ten minutes now can save you from a surprise renewal or a cancellation bill of hundreds or thousands of dollars later.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Contracts, Moving & Canceling

Moving: Taking Your Alarm Along, or Taking Over One

Moving while you're under an alarm contract is common, and the companies have a process for it. The key is to call early, before the movers arrive.

If you're moving out

  1. Call the company as soon as you know your moving date. Have your account number and verbal password ready.
  2. Ask what your options are: moving the service to your new home, a new system there, or ending the contract, and what each one costs.
  3. Ask whether any equipment must be left behind, returned, or can come with you.
  4. Get the plan, the dates and any charges in writing (an email is fine).
  5. On moving day, don't pull equipment off the walls yourself unless the company says to.

ADT says existing customers can have their current system relocated and reinstalled at the new house, and that the cost depends on your situation. Ask about any current mover offers, since those change.

Checked against ADT on November 15, 2026.

If you're moving into a house with an alarm

  • The old owner's contract doesn't automatically become yours. You'll set up your own account, usually with a new agreement.
  • Call the company whose name is on the panel or yard sign and ask whether they can activate service with the existing equipment.
  • Have every code changed, including the master code, and set your own verbal password.
  • If you don't want monitoring, ask how to make sure the old account is closed, so the system isn't still calling someone else.
Tip
Leaving the old house
Before you hand over the keys, make sure your account is closed or moved, your emergency contacts are removed, and the new owners know which company to call.
Why it helps
What this does for you
A call a few weeks ahead means your new home is protected from the first night, and you don't keep paying for a house you've left.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Contracts, Moving & Canceling

Canceling Monitoring Without Surprises

Canceling is usually done by phone, and the company will often try to keep you. That's normal. Stay polite, know what you want, and take notes.

What it can cost

  • ADT: its residential terms say that if you end a 36-month contract early, ADT may bill 75% of the remaining monthly charges.
  • Brinks Home: its help center says that if you cancel early, you pay the remaining monthly fees for the term in full.
  • Vivint: the cost depends on your agreement; if your equipment was financed, expect the unpaid equipment balance to come due. Ask Vivint for the exact figure.
  • Once the contract term is over, most companies only ask for notice, often 30 days. Check yours.

Checked against ADT Residential Terms and Brinks Home Help Center on November 15, 2026.

Canceling, step by step

  1. Find your contract and look for the end date and the cancellation section.
  2. Call the customer-service number on your bill (not one from a web search). Have your account number and verbal password ready.
  3. Say clearly: "I'd like to cancel my monitoring service." Ask: "What will I owe, and when is the last day of service?"
  4. If they offer a lower price to stay, it's fine to say "No, thank you." Or take it, if it suits you.
  5. Ask for a cancellation confirmation number and a confirming email or letter.
  6. Write down the date, time, the person's name and the number on the Cheat-Sheet.
  7. Watch your next two bank or card statements to be sure the charges stop.
Tip
If you canceled by mistake
Call back right away and ask whether the same account can be kept or restored before the service end date. Asking early gives you the most options.
Watch out
Still being charged after canceling?
Call the company first with your confirmation number. If that doesn't fix it, your bank or card company can help you dispute a charge, and you can file a complaint with the Ohio Attorney General's consumer protection section.
Why it helps
What this does for you
With a confirmation number and a few notes, canceling is one phone call, not a months-long billing argument.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams & Smart Choices

Door-to-Door Sales & "Upgrade" Scams

Alarm systems have long been sold door to door, especially in spring and summer. Some of those salespeople are honest. Some have been caught telling people they were from the customer's own alarm company.

This isn't just a rumor

In 2018 Vivint agreed to pay $10 million to settle ADT's claims that Vivint's door-to-door agents had misled ADT customers into thinking Vivint was connected to ADT. In 2023 a federal jury in North Carolina found that Vivint had used deceptive door-to-door sales practices against customers of CPI Security, a regional alarm company, and awarded CPI about $189 million; Vivint contested the verdict. Other companies' agents have been accused of similar tricks.

Checked against Security Sales & Integration and CE Pro on November 15, 2026.

The lines to listen for

  • "We're here to upgrade your system" or "your equipment is out of date."
  • "Your alarm company went out of business" or "we took over their accounts."
  • "Your system will stop working when the network shuts off" (How Your System Reaches the Monitoring Center explains the real story).
  • "This price is only good today."
  • "Just sign here so I can show the office I stopped by."

What to do at the door

  1. You don't have to open the door. Talking through it, or not answering at all, is fine.
  2. If you do talk, ask: "What company are you with?" and "May I see your ID and your business card?"
  3. Don't let them in to "check" your panel, and don't sign anything or show them your bill.
  4. Say: "I'll call my alarm company myself." Then close the door.
  5. Call the number on your own bill and ask whether they sent anyone. They'll know.
  6. If someone claimed to be from your company and wasn't, tell your company and your police department's non-emergency line.
Scam alert
Signed already? You likely have three days
If you signed at home, the FTC's Cooling-Off Rule generally gives you three business days to cancel a home security sale, even if they've installed it (Reading the Contract Before You Sign). Send the cancellation in writing, keep a copy, and call your original company too.

Checked against FTC (sibling check) on November 15, 2026.

Why it helps
What this does for you
One sentence, "I'll call my company myself," ends almost every one of these pitches, and keeps you from ending up with two contracts and two monthly bills.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams & Smart Choices

Fake Technicians, Phone Calls & Phishing

Your alarm company has your address, your codes and your schedule, so pretending to be your alarm company is an attractive trick. Here's how to tell real from fake.

At the door: "I'm the technician"

  1. Real service visits are scheduled. If you didn't book one, be suspicious.
  2. Ask for the technician's name and company ID, then call the number on your bill (not one they give you) to confirm the visit.
  3. A real technician will know your account and won't mind waiting while you check.
  4. Stay with them while they work, and never give them your master code or verbal password out loud. A real technician can do their job with the company's own tools.

On the phone

  • A caller asks for your verbal password or a code "to verify your account" when no alarm is going off. Hang up.
  • A caller says your account is past due and you'll lose service unless you pay right now by gift card, wire, payment app or cryptocurrency. Real companies don't ask for those.
  • A caller wants to "remote in" to your computer or phone to fix your alarm. Say no.

Email and text

  • Messages about a "failed payment," "account suspended" or "free upgrade" with a link. Don't tap. Open the company's app or type its website yourself.
  • Fake support numbers in web search ads. Use the number on your bill or keypad sticker, and write it on the Cheat-Sheet.
Scam alert
If you already gave out a code or password
Call your alarm company on the number from your bill. Ask them to change your verbal password, and change any keypad code you shared. If you paid with a card or bank account, call your bank too. Gift cards: call the number on the back of the card quickly.
Why it helps
What this does for you
Knowing the company will never call out of the blue asking for your password makes these scams easy to spot and easy to hang up on.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
Scams & Smart Choices

Monitored or Do-It-Yourself? An Honest Comparison

You don't need a big company and a three-year contract to have a good alarm. Do-it-yourself systems like SimpliSafe and Ring Alarm can also be professionally monitored, often month to month. Here's a fair look at both.

Traditional monitored (ADT, Vivint, Brinks)DIY with optional monitoring
InstallationA technician does itYou do it, or pay someone to help
ContractCommonly 36 monthsOften month to month
Monthly costUsually higherUsually lower; self-monitoring cheapest
Service visitsIncluded or availableMostly by phone or mail-in
MovingCall the company; may mean a new contractPack it up and take it
Hardwired old sensorsCan often reuse themUsually all new wireless sensors

A few DIY prices, as of November 2026

SimpliSafe's Standard monitoring plan is $22.99 a month and its Core plan is $32.99. Ring's Pro plan, which includes 24/7 professional monitoring for Ring Alarm, is $19.99 a month. Bill's SimpliSafe and Ring guides go into these plans in detail.

Checked against SimpliSafe Support and Ring Help (sibling check) on November 15, 2026.

Who tends to do best with which

  • A traditional monitored system often suits someone who wants a technician to handle everything, already has a wired system in the walls, or values in-person service.
  • A DIY system often suits someone comfortable with an app, who rents, moves often, or wants to avoid a long contract.
  • Self-monitoring only (alerts to your phone, nobody else watching) is the cheapest, but it only helps if you see the alert and can act on it.
Good to know
Already under contract?
If you're happy, there's no reason to switch. If you're not, look at your contract end date first. Switching a year before it ends often costs more than waiting.
Why it helps
What this does for you
Comparing honestly means you pay for the help you'll really use, whether that's a technician at the door or a simple app on your phone.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When to Call Bill & Your Cheat-Sheet

When to Call Bill

Most of what's in this guide you can do yourself, at your own pace. But part of being helpful is being honest about when a hand saves you time and worry. Here's my straight advice, with no pressure.

Times it's well worth a call

  • Setting up the app — finding the right one for your system, signing in, adding family members with their own logins, and turning on the alerts you actually want.
  • Sorting out codes and contacts — making a list of who has a code, cleaning out old ones, and checking your emergency contact list and verbal password are current.
  • A second opinion before you sign — reading a contract or a quote with you, line by line, so you know the total cost, the term and the renewal rules.
  • A knock at the door you're unsure about — an "upgrade" pitch, a technician you didn't book, or a call asking for your password.
  • Comparing monitored and DIY systems honestly for your home and budget, with no commission on either.
  • Helping a parent — making the keypad and app simple, and writing out easy instructions for arming, disarming and canceling a false alarm.

What I don't do

I'm a technology helper, not an alarm installer or a monitoring company. I don't open control panels, change wiring or program installer settings; that's for your alarm company's technician. I also don't sell systems or monitoring, so my only interest is that you end up with what suits you.

What working with me is like

I work at your pace, explain what I'm doing in plain words, and never talk down to anyone. I'll tell you honestly when something isn't worth your money. I've been doing this kind of work for more than 30 years, and I serve Portage County, Ohio, in person, and folks farther away by remote help.

From Bill
How to reach me
Call (330) 200-8042 or book a time at billshometech.com/book. My help is $49 remote · $99 in your home. This guide is yours to keep for free; if you'd like a hand, I'm only a phone call away.
Good to know
You may meet Sophie first
When you call or visit billshometech.com, you might be greeted by Sophie, my AI receptionist. She can answer quick questions and help you book a time. A real person — me — does the actual help.

Thank you for taking the time to understand your alarm. Keep your codes private, your contact list current, and your company's real phone number handy.

— Bill

Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
All topics
When to Call Bill & Your Cheat-Sheet

Your Monitored Alarm Cheat-Sheet

Keep just this page somewhere private, not stuck to the keypad. The whole guide, boiled down.

The essentials

TopicRemember
Stay / Away / OffStay at night or when home. Away when the house is empty. Off to disarm.
False alarmDisarm, answer the call, give your verbal password. Missed it? Call them back.
Real alarmDon't go in. Get to safety and call 911 yourself.
Fire or CO alarmGet out first, then call 911 from outside.
Verbal passwordOnly give it when your alarm is going off or when you called them.
Duress codeKeep it secret. Never test it without telling the company first.
TestingAlways put the account "on test" first, then call to confirm signals arrived.
Trouble beepsRead the message. "Comm" trouble means call the company.
Door-to-door pitch"I'll call my company myself." Close the door.
Signed at home?FTC Cooling-Off Rule: generally three business days to cancel.
CancelingNumber from your bill; get a confirmation number in writing.
Town rulesCheck your town's alarm registration and false-alarm fees.

Write it down once

Keep handy
Alarm company & phone (from my bill)____________________
Monitoring center phone (from sticker)____________________
Account number____________________
Panel / keypad brand & model____________________
App name & login email____________________
Communicator: cellular, internet or landline____________________
Contract start & end date____________________
Town alarm permit number & renewal____________________
Emergency contacts (in order)____________________
Last full test with the company (date)____________________

When something's wrong, in order

  1. Siren sounding and you know why? Disarm, then wait for the call and give your verbal password.
  2. Any chance it's real, or it's a fire or CO alarm? Get out and call 911.
  3. Beeping but no siren? Read the keypad message; it's probably trouble, not an alarm (Power Outages, Batteries & Trouble Beeps).
  4. App won't connect? Check your phone's internet, then sign out and back in. The keypad still works.
  5. Someone at the door or on the phone claiming to be your company? Call the number on your bill.
  6. Billing or contract question? Find your contract end date, then call the number on your bill.
  7. Still stuck? Call Bill at (330) 200-8042.
Stuck on this one?

Call Bill and he'll walk you through it — or come do it for you.

Call Bill · (330) 200-8042$49 remote · $99 in your home
Step 1 of 5
1